Diferencia entre revisiones de «Zabbix»

De gacq wiki
Saltar a: navegación, buscar
(Referencias)
 
(No se muestran 6 ediciones intermedias de 2 usuarios)
Línea 4: Línea 4:
 
Documentación
 
Documentación
 
*[http://www.zabbix.com/manual/v1.1/ ZABBIX Manual v1.1]
 
*[http://www.zabbix.com/manual/v1.1/ ZABBIX Manual v1.1]
 +
**[http://www.zabbix.com/manual/v1.1/config_items.php List of supported parameters]
 +
**[http://www.zabbix.com/manual/v1.1/config_items_types.php Types of Items]
 +
**http://www.zabbix.com/manual/v1.1/internals_db.php
 +
**http://www.zabbix.com/manual/v1.1/config.php
 +
**http://www.zabbix.com/manual/v1.1/tutorials.php
 +
 
Soporte
 
Soporte
 
*[http://www.zabbix.com/forum/ ZABBIX Forums]
 
*[http://www.zabbix.com/forum/ ZABBIX Forums]
 
Articulos
 
Articulos
*[http://www.enterprisenetworkingplanet.com/netos/article.php/10951_3507441_1 Monitor Your Net with Free, High-Performance ZABBIX
+
*[http://www.enterprisenetworkingplanet.com/netos/article.php/10951_3507441_1 Monitor Your Net with Free, High-Performance ZABBIX]
 
(May 24, 2005)]
 
(May 24, 2005)]
 
*[http://www.howtoforge.com/zabbix_network_monitoring Network Monitoring With Zabbix]
 
*[http://www.howtoforge.com/zabbix_network_monitoring Network Monitoring With Zabbix]
Línea 20: Línea 26:
 
==Parametros==
 
==Parametros==
 
monitor servers on non-standard ports, like this:
 
monitor servers on non-standard ports, like this:
check_service[http, 8080]  
+
check_service[http, 8080]
  
 
How many seconds does it take to get a response from the POP server:
 
How many seconds does it take to get a response from the POP server:
check_service_perf[pop,192.168.1.100,110]
+
check_service_perf[pop,192.168.1.100,110]
  
 
How many seconds does it take to get a response from the Web server:
 
How many seconds does it take to get a response from the Web server:
check_service_perf[http,192.168.1.101,80]  
+
check_service_perf[http,192.168.1.101,80]  
  
 
And so forth for all of your servers. Another useful item to monitor is used/remaining disk space:
 
And so forth for all of your servers. Another useful item to monitor is used/remaining disk space:
diskfree[/home]
+
diskfree[/home]
disktotal[/var]
+
disktotal[/var]
diskused[/]
+
diskused[/]
  
 
You can dig more deeply into server load by monitoring numbers of writes in the last minute or five minutes, or whatever you specify:
 
You can dig more deeply into server load by monitoring numbers of writes in the last minute or five minutes, or whatever you specify:
disk_write_ops1[hdb3]
+
disk_write_ops1[hdb3]
disk_write_ops5[hdb3]
+
disk_write_ops5[hdb3]
  
 
And also reads:
 
And also reads:
disk_read_ops1[hdb3]
+
disk_read_ops1[hdb3]
disk_read_ops5[hdb3]
+
disk_read_ops5[hdb3]
  
Swap space, physical memory, CPU temperature, number of running processes, number of inodes, and netload are but a few of the many remaining items that ZABBIX can monitor.
+
Swap space, physical memory, CPU temperature, number of running processes, number of inodes, and netload are but a few of the many remaining items that ZABBIX can monitor.
  
 
=Triggers=
 
=Triggers=
 
Watch the incoming traffic load on a particular NIC:
 
Watch the incoming traffic load on a particular NIC:
({bratgrrl.com:netloadin1[eth1]})>500K
+
<nowiki>({bratgrrl.com:netloadin1[eth1]})>500K</nowiki>
 
When number of received bytes on eth1 is more than 500 KB within a minute, an alert will be triggered
 
When number of received bytes on eth1 is more than 500 KB within a minute, an alert will be triggered
  
 
A very useful trigger is changes in files that should not change, like files in /bin:
 
A very useful trigger is changes in files that should not change, like files in /bin:
({bratgrrl.com:cksum[/bin/login].diff(0)})>0  
+
<nowiki>({bratgrrl.com:cksum[/bin/login].diff(0)})>0</nowiki>
  
  
Línea 70: Línea 76:
 
configure: error: Invalid NET-SNMP directory - unable to find net-snmp-includes.h
 
configure: error: Invalid NET-SNMP directory - unable to find net-snmp-includes.h
 
</nowiki>
 
</nowiki>
 +
 +
 +
=Links=
 +
*http://moxdiamond.blogspot.com/2006/03/network-monitoring-with-zabbix.html
 +
 +
*[http://www.cisco.com/web/about/ac50/ac47/2.html Cisco Network Topology Icons]
 +
*http://www.nagiosexchange.org/Image_Packs.75.0.html

Revisión actual del 23:56 11 sep 2006

http://www.zabbix.com

Referencias

Documentación

Soporte

Articulos

(May 24, 2005)]

Instalacion

apt-get install libc6-dev libmysqlclient6-dev libsnmp5 libsnmp5-dev php4-gd Seguir el procedimiento de instalacion segun manual

Agentless checks

Parametros

monitor servers on non-standard ports, like this:

check_service[http, 8080]

How many seconds does it take to get a response from the POP server:

check_service_perf[pop,192.168.1.100,110]

How many seconds does it take to get a response from the Web server:

check_service_perf[http,192.168.1.101,80] 

And so forth for all of your servers. Another useful item to monitor is used/remaining disk space:

diskfree[/home]
disktotal[/var]
diskused[/]

You can dig more deeply into server load by monitoring numbers of writes in the last minute or five minutes, or whatever you specify:

disk_write_ops1[hdb3]
disk_write_ops5[hdb3]

And also reads:

disk_read_ops1[hdb3]
disk_read_ops5[hdb3]

Swap space, physical memory, CPU temperature, number of running processes, number of inodes, and netload are but a few of the many remaining items that ZABBIX can monitor.

Triggers

Watch the incoming traffic load on a particular NIC:

({bratgrrl.com:netloadin1[eth1]})>500K

When number of received bytes on eth1 is more than 500 KB within a minute, an alert will be triggered

A very useful trigger is changes in files that should not change, like files in /bin:

({bratgrrl.com:cksum[/bin/login].diff(0)})>0 



Errores que pueden aparecer

Falta instalar libc6-dev

checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details.

Falta instalar libmysqlclient6-dev

configure: error: Invalid MySQL directory - unable to find mysql.h

Falta libsnmp5 y libsnmp5-dev

configure: error: Invalid NET-SNMP directory - unable to find net-snmp-includes.h


Links