Diferencia entre revisiones de «Xen»

De gacq wiki
Saltar a: navegación, buscar
(Packages install)
Línea 3: Línea 3:
 
===Packages install===
 
===Packages install===
 
;INTEL
 
;INTEL
  sudo apt-get install linux-image-2.6.18-6-xen-686 xen-hypervisor-3.0.3-1-i386-pae \\
+
  sudo apt-get install linux-image-2.6.18-6-xen-686 xen-hypervisor-3.0.3-1-i386 xen-linux-system-2.6.18-6-xen-686 libc6-xen
xen-linux-system-2.6.18-6-xen-686
 
  
 
;AMD
 
;AMD
  sudo apt-get install linux-image-2.6-xen-amd64 xen-hypervisor-3.0.3-1-amd64 \\
+
  sudo apt-get install linux-image-2.6-xen-amd64 xen-hypervisor-3.0.3-1-amd64 xen-linux-system-2.6.18-5-xen-amd64
xen-linux-system-2.6.18-5-xen-amd64
+
 
 +
Optional packages:
 +
xen-docs-3.0
  
 
===Network config===
 
===Network config===

Revisión del 10:29 2 mar 2008

Installation

Debian Etch installation

Packages install

INTEL
sudo apt-get install linux-image-2.6.18-6-xen-686 xen-hypervisor-3.0.3-1-i386 xen-linux-system-2.6.18-6-xen-686 libc6-xen
AMD
sudo apt-get install linux-image-2.6-xen-amd64 xen-hypervisor-3.0.3-1-amd64 xen-linux-system-2.6.18-5-xen-amd64

Optional packages:

xen-docs-3.0

Network config

Before the reboot, a small change in /etc/xen/xend-config.sxp should be done.

Replace

(network-script network-dummy)

with

(network-script 'network-bridge netdev=eth0')
reboot


xen-tools

(optional) to install latests version from project repository add to sources.lists
#
#  Steve Kemp's repository:  Etch
#
deb     http://apt.steve.org.uk/etch etch main non-free contrib
deb-src http://apt.steve.org.uk/etch etch main non-free contrib
sudo apt-get install xen-tools
xen-tools config

in /etc/xen-tools/xen-tools.conf

lvm = vg0
debootstrap = 1

size   = 10Gb      # Disk image size.
memory = 256Mb    # Memory size
swap   = 256Mb    # Swap size
fs     = ext3     # use the EXT3 filesystem for the disk image.
dist   = etch    # Default distribution to install.
image  = sparse   # Specify sparse vs. full disk images.

dhcp = 1

kernel = /boot/vmlinuz-2.6.18-5-xen-amd64
initrd = /boot/initrd.img-2.6.18-5-xen-amd64

mirror = http://ftp.us.debian.org/debian/

Administration

Create image

xen-create-image --hostname vserver1.mydomain
or use with options
xen-create-image --hostname=vm1.domain.com --size=5Gb --swap=256Mb --ide \
--ip=192.168.0.101 --netmask=255.255.255.0 --gateway=192.168.0.1 --force \
--dir=/vserver --memory=32Mb --arch=i386 --kernel=/boot/vmlinuz-2.6.18-xenU \
--debootstrap --dist=etch --mirror=http://ftp2.de.debian.org/debian/ --passwd

Boot

xm create /etc/xen/vserver1.mydomain.cfg

Console connect

xm console vserver1.mydomain

Other common commands

xm shutdown <name> - Stop a virtual machine.
xm destroy <name> - Stop a virtual machine immediately without shutting it down. It's as if you switch off the power button.
xm list - List all running systems.
xm help - List of all commands.


Tools

Images

References