Diferencia entre revisiones de «Monitoreo»

De gacq wiki
Saltar a: navegación, buscar
(Herramientas, comparativas)
Línea 19: Línea 19:
 
*[[Zabbix]]
 
*[[Zabbix]]
 
*Jffnms
 
*Jffnms
 +
 +
==Tools lists==
 +
*http://www-spires.slac.stanford.edu/xorg/nmtf/nmtf-tools.html
 +
*http://2fwww.ees.net.nz/it/networking/network_tools.htm
 +
*http://www.networkuptime.com/tools/index.shtml
 +
*http://staff.science.uva.nl/~jblom/datatag/wp3_1/tools/
 +
*[http://people.ee.ethz.ch/~oetiker/webtools/smokeping/pub/contrib/EnterprisePACSMonitoringwithNagiosSmokepingandCacti.pdf Monitoring your Enterprise PACS with Nagios®, Cacti and Smokeping (PDF)]
  
 
= Analisis =
 
= Analisis =
Línea 35: Línea 42:
 
== Empresas ==
 
== Empresas ==
 
*http://www.itgroundwork.com/
 
*http://www.itgroundwork.com/
 
== Herramientas, comparativas ==
 
*http://www-spires.slac.stanford.edu/xorg/nmtf/nmtf-tools.html
 
*http://www.networkuptime.com/tools/index.shtml
 
*http://staff.science.uva.nl/~jblom/datatag/wp3_1/tools/
 
*[http://people.ee.ethz.ch/~oetiker/webtools/smokeping/pub/contrib/EnterprisePACSMonitoringwithNagiosSmokepingandCacti.pdf Monitoring your Enterprise PACS with Nagios®, Cacti and Smokeping (PDF)]
 
  
 
= Herramientas =
 
= Herramientas =

Revisión del 09:26 23 abr 2007

Definición

Monitoreo: Dícese del arte de torear monos. El arte de convertir monos en toros

Tools

Basic

Frameworks

Tools lists

Analisis

Revisar

con analisis positivos

Empresas

Herramientas

Sistemas de gran escala

 Ganglia is a scalable distributed monitoring system for high-performance computing systems such as clusters and Grids

Algunas de las herramientas disponibles, solo una seleccion de las mejores

SmokePing

La pagina de ejemplo la encontramos en:

http://localhost/cgi-bin/smokeping.cgi

Para poder usar el probe de http hay que instalar a mano:

apt-get install echoping

Editar a mano

/etc/smokeping/config

segun

man smokeping_config

Como leer los graficos

  • The median value is expressed with a horizontal, coloured line piece at the time the packets were send.
  • The # packets lost are expressed with the colour of the line piece.
  • The distribution of the Round-Trip-Times in the set of packets send are expressed with a vertical set of gray blocks, where the blackness of a block is an indication for the # packets in the sample bin, expressed by the height of the block. The gray blocks are of course only drawn when the distribution of Round-Trip-Times is observable from within the resolution of the ping command and / or the vertical RTT scale.

Nagios

NAGIOS has a Windows client you can install and report on standard services such as Event Logs alerts, CPU/Mem/Disk Usage etc. And monitor standard TCP services. You can also run syslog-ng on Windows and send all event log info to your Linux syslog.

MRTG

http://people.ee.ethz.ch/~oetiker/webtools/mrtg

MRTG can be used not only for bandwidth metering. We can configure MRTG to monitor server/router CPU, memory, uptime, TCP connections and a lot of other parameters. On MS Windows MRTG can be configured to keep track on any of system counters (disk usage, memory usage. Please fill in online form if you are interested in additional information. from http://www.farpost.com/windows_mrtg_setup.php#q7

Cacti

http://www.cacti.net/

Netmap

http://www.it.teithe.gr/~v13/

Varios

SNMP

apt-get install snmpd snmp editar /etc/snmp/snmpd.conf y modificar #com2sec paranoid default public com2sec readonly 127.0.0.1 public #com2sec readwrite default private y /etc/init.d/snmpd restart

Sensores del sistema

lm-sensors

apt-get install lm-sensors
sensors-detect

Seguir las instrucciones y copiar los modulos como dice http://vctrsnts.dyndns.org/index.php?deb=articulos

Discos S.M.A.R.T.

apt-get install smartmontools
# habilitarlo en
vi /etc/default/smartmontools
/etc/init.d/smartmontools start
# ver que descubrio
tail -30 /var/log/syslog

Por ahora no hay soporte a SATA If you ever tried to use smartctl to read info from your SATA drive, it will fail because libata doesn't yet support the needed ATA-passthrough ioctl() calls. Jeff Garzik, the developer of libata, says it will support it in the future. In the meantime you can apply a patch, and use libata-dev. The libata patchset can be acquired from http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/ , and after you install it, you can use smartctl to read SMART info from SATA device. However you must specify, on the command line, option "-d ata"

Articulos varios