Diferencia entre revisiones de «Linux tips»

De gacq wiki
Saltar a: navegación, buscar
(http://bukgetert.0lx.net/article-1659.htm)
m (Revertidas las ediciones realizadas por C4tboCcdro (Talk); a la última edición de WikiSysop)
 
(No se muestran 4 ediciones intermedias de otro usuario)
Línea 1: Línea 1:
[http://bukgetert.0lx.net/article-1659.htm skinny dipping videos] [http://ettaelt.strefa.pl/news-1716.html actor male movie] [http://mahohmie.qsh.eu/resource776.htm quotes from the movie stick it] [http://zelfibu.strefa.pl/korolald-1009.html movie online show tv watch] [http://acsitzar.0lx.net/news-jennifer-aniston-2008-11-10.html jennifer aniston video clip]
 
[http://bukgetert.0lx.net/article-287.htm sad movies always make me cry] [http://tarobasal.strefa.pl/sitemap.htm webmap] [http://betheres.qsh.eu/comment-141.htm revolutionary war movies] [http://dronoubr.0lx.net/angelina-antonio.html angelina antonio banderas jolie video] [http://mahohmie.qsh.eu/resource1532.htm new realeased movies]
 
[http://huruple.qsh.eu/20081227-sara-jay-xxx.htm sara jay xxx movie] [http://naceceli.qsh.eu/sitemap.html link] [http://huruple.qsh.eu/20090105-adc-video-patch.htm adc video patch panel] [http://tulilre.strefa.pl/2008-12-27-imovie-5-download.html imovie 5 download] [http://faquafav.is-the-boss.com/text-545.htm pinnacle studio 9.0 serial]
 
[http://mahohmie.qsh.eu/resource1805.htm spongebob tv movie character toy] [http://fademon.0lx.net/article-1434.htm put music videos on your psp for free] [http://acsitzar.0lx.net/news-joes-movies-2008-11-12.html joes movies] [http://caraines.qsh.eu/defanele.htm iran movie] [http://betheres.qsh.eu/comment-180.htm movie prime cut]
 
[http://caraines.qsh.eu/zelgolg.htm amc movie .com] [http://caraines.qsh.eu/zmexplnrb.htm ejaculate galleries.squirting video] [http://spfortne.qsh.eu/20081226-adult-alyssa.html adult alyssa milano movie] [http://lofaako.strefa.pl/sitemap.html map] [http://caraines.qsh.eu/caelttro.htm anne curtis video scandal download]
 
[http://zelgetgo.0lx.net/sitemap.htm url] [http://relquaca.is-the-boss.com/20090104-lanhound-serial.html lanhound serial number] [http://bukgetert.0lx.net/article-28.htm sitemap] [http://fispruil.qsh.eu/news1763.html she will be loved video cast maroon 5] [http://bukgetert.0lx.net/article-52.htm make a movie screen]
 
[http://lifokdron.0lx.net/1739.html michael thriller video] [http://huruple.qsh.eu/20090101-interracial-video.htm interracial video tgp] [http://relquaca.is-the-boss.com/20090103-password-stealer.html password stealer crack] [http://acsitzar.0lx.net/news-most-wanted-2008-11-17.html most wanted movie] [http://vihencbr.0lx.net/secure-video.html secure video chat]
 
[http://acsitzar.0lx.net/news-jethro-tull-videos-2008-11-19.html jethro tull videos] [http://bukgetert.0lx.net/sitemap.htm links] [http://lifokdron.0lx.net/504.html movie theater in virginia] [http://flheddin.qsh.eu/brfadron-453.html motivational military videos] [http://sematild.qsh.eu/resource322.htm real player video codecs]
 
 
<pre><nowiki>
 
<pre><nowiki>
 
Mike Chirico (mchirico@users.sourceforge.net) or (mchirico@comcast.net)
 
Mike Chirico (mchirico@users.sourceforge.net) or (mchirico@comcast.net)

Revisión actual del 11:55 11 ene 2009

Mike Chirico (mchirico@users.sourceforge.net) or (mchirico@comcast.net)
Copyright (C) 2004 (GNU Free Documentation License)
Last Updated: Thu Dec 28 16:42:50 EST 2006

The latest version of this document can be found at:
http://souptonuts.sourceforge.net/how_to_linux_and_open_source.htm
  or text version ( if you have trouble downloading the full document: over 140 pages )
http://prdownloads.sourceforge.net/souptonuts/How_to_Linux_and_Open_Source.txt?download




For tips on Gmail with Postix and Fetchmail
http://souptonuts.sourceforge.net/postfix_tutorial.html

For tips on using SQLite (over 25 pages)
http://prdownloads.sourceforge.net/souptonuts/README_sqlite_tutorial.html?download


For tips on MySQL reference:
http://prdownloads.sourceforge.net/souptonuts/README_mysql.txt?download


For a recommended reading list
http://prdownloads.sourceforge.net/souptonuts/Recommended_Reading.html?download


For tips on upgrading RedHat 9 or 8.0 to 2.6.x src kernel
http://prdownloads.sourceforge.net/souptonuts/README_26.txt?download


For tips on Comcast Email with Home Linux Box
http://prdownloads.sourceforge.net/souptonuts/README_COMCAST_EMAIL.txt?download



  **Note, if you want email notification after every 50 new tips have been
    added, then, click on the following link:
     https://sourceforge.net/project/filemodule_monitor.php?filemodule_id=120838



TIP 1:

     Is NTP Working?

     STEP 1 (Test the current server):

          Try issuing the following command:

          $ ntpq -pn

           remote refid st t when poll reach delay offset jitter
           ===================================================
           tock.usno.navy 0.0.0.0 16 u - 64 0 0.000 0.000 4000.00

          The above is an example of a problem.
          Compare it to a working configuration.

          $ ntpq -pn

           remote refid st t when poll reach delay offset jitter
           ========================================================
           +128.4.40.12 128.4.40.10 2 u 107 128 377 25.642 3.350 1.012
           127.127.1.0 127.127.1.0 10 l 40 64 377 0.000 0.000 0.008
           +128.91.2.13 128.4.40.12 3 u 34 128 377 21.138 6.118 0.398
           *192.5.41.41 .USNO. 1 u 110 128 377 33.69 9.533 3.534

     STEP 2 (Configure the /etc/ntp.conf):

          $ cat /etc/ntp.conf

            # My simple client-only ntp configuration.
            server timeserver1.upenn.edu
            # ping -a timeserver1.upenn.edu shows the IP address 128.91.2.13
            # which is used in the restrict below
            restrict 128.91.2.13
            server tock.usno.navy.mil
            restrict 192.5.41.41
            server 128.4.40.12
            restrict 128.4.40.12
            server 127.127.1.0 # local clock
            fudge 127.127.1.0 stratum 10
            driftfile /etc/ntp/drift
            restrict default ignore
            restrict 127.0.0.0 mask 255.0.0.0
            authenticate no

     STEP 3 (Configure /etc/ntp/step-tickers):

          The values for server above are placed in the "/etc/ntp/step-tickers" file

          $ cat /etc/ntp/step-tickers

              timeserver1.upenn.edu
              tock.usno.navy.mil
              128.4.40.12

          The startup script /etc/rc.d/init.d/ntpd will grab the servers in this
          file and execute the ntpdate command as follows:

             /usr/sbin/ntpdate -s -b -p 8 timeserver1.upenn.edu

          Why? Because if the time is off ntpd will not start. The command above set the
          clock. If System Time deviates from true time by more than 1000 seconds, then,
          the ntpd daemon  will enter panic mode and exit.

     STEP 4 (Restart the service and check):

          Issue the restart command

            /etc/init.d/ntpd restart

          check the values for "ntpq -pn",
          which should match step 1.

             ntpq -pn

     SPECIAL NOTE:

          Time is always stored in the kernel as the number of seconds since
          midnight of the 1st of January 1970 UTC, regardless of whether the
          hardware clock is stored as UTC or not.  Conversions to local time
          are done at run-time. So, it's easy to get the time in different
          timezones for only the current session as follows:


              $ export TZ=EST
              $ date
              Mon Aug  2 10:34:04 EST 2004

              $ export TZ=NET
              $ date
              Mon Aug  2 15:34:18 NET 2004

          The following are possible values for TZ:

              Hours From Greenwich Mean Time (GMT) Value Description
              0 GMT Greenwich Mean Time
              +1 ECT European Central Time
              +2 EET European Eastern Time
              +2 ART
              +3 EAT Saudi Arabia
              +3.5 MET Iran
              +4 NET
              +5 PLT West Asia
              +5.5 IST India
              +6 BST Central Asia
              +7 VST Bangkok
              +8 CTT China
              +9 JST Japan
              +9.5 ACT Central Australia
              +10 AET Eastern Australia
              +11 SST Central Pacific
              +12 NST New Zealand
              -11 MIT Samoa
              -10 HST Hawaii
              -9 AST Alaska
              -8 PST Pacific Standard Time
              -7 PNT Arizona
              -7 MST Mountain Standard Time
              -6 CST Central Standard Time
              -5 EST Eastern Standard Time
              -5 IET Indiana East
              -4 PRT Atlantic Standard Time
              -3.5 CNT Newfoundland
              -3 AGT Eastern South America
              -3 BET Eastern South America
              -1 CAT Azores

              DST timezone


              0      BST for British Summer.
              +400   ADT for Atlantic Daylight.
              +500   EDT for Eastern Daylight.
              +600   CDT for Central Daylight.
              +700   MDT for Mountain Daylight.
              +800   PDT for Pacific Daylight.
              +900   YDT for Yukon Daylight.
              +1000  HDT for Hawaii Daylight.
              -100   MEST for Middle European Summer,
                         MESZ for Middle European Summer,
                         SST for Swedish Summer and FST for French Summer.
              -700   WADT for West Australian Daylight.
              -1000  EADT for Eastern Australian Daylight.
              -1200  NZDT for New Zealand Daylight.

     The following is an example of setting the TZ environment variable
     for the timezone, only when timezone changes go into effect.

               $ export TZ=EST+5EDT,M4.1.0/2,M10.5.0/2

     Take a look at the last line "M10.5.0/2". What does it mean? Here is the
     documentation


        Mm.w.d This  specifies  day  d (0 <= d <= 6) of week w (1 <= w <= 5) of
              month m (1 <= m <= 12).  Week 1 is the first week in which day d
              occurs and week 5 is the last week in which day d occurs.  Day 0
              is a Sunday.

              The time fields specify when, in the local time  currently  in
              effect, the  change  to  the  other  time  occurs.   If omitted,
              the default is  02:00:00.

      So this is what it means. M10 stands for October, the 5 is the fifth week
      that includes a Sunday (note 0 in M10.5.0/2 is Sunday). To see that it is
      the fifth week see the calendar below. The time change occurs a 2am in
      the morning.

                                October
                         Su Mo Tu We Th Fr Sa
                                         1  2
                          3  4  5  6  7  8  9
                         10 11 12 13 14 15 16
                         17 18 19 20 21 22 23
                         24 25 26 27 28 29 30
                         31

       Prove it. Take the following program sunrise, which can calcuates sunrise
       and sunset for an latitude and longitude. This program can be downloaded
       from the following location:
           http://sourceforge.net/direct-dl/mchirico/souptonuts/working_with_time.tar.gz

       Below is a bash script that will run the program for the next 100 days.

          #!/bin/bash
          #  program: next100days  Mike Chirico
          #  download:
          #  http://sourceforge.net/direct-dl/mchirico/souptonuts/working_with_time.tar.gz
          #
          #  This will calculate the sunrise and sunset for
          #  latitude     39.95  Note must convert to degrees
          #  longitude  75.15  Note must convert to degrees
          lat=39.95
          long=75.15
          for (( i=0; i <= 100; i++))
          do
            sunrise    `date -d "+$i day" "+%Y %m %d"` $lat $long
          done

       Take a look at the following sample output.

           $ export TZ=EST+5EDT,M4.1.0/2,M10.5.0/2
           $ ./next100days

          Sunrise  08-24-2004  06:21:12   Sunset 08-24-2004  19:43:42
          Sunrise  08-25-2004  06:22:09   Sunset 08-25-2004  19:42:12
          Sunrise  08-26-2004  06:23:06   Sunset 08-26-2004  19:40:41
          Sunrise  08-27-2004  06:24:03   Sunset 08-27-2004  19:39:09
          Sunrise  08-28-2004  06:25:00   Sunset 08-28-2004  19:37:37
          Sunrise  08-29-2004  06:25:56   Sunset 08-29-2004  19:36:04
          Sunrise  08-30-2004  06:26:53   Sunset 08-30-2004  19:34:31
          Sunrise  08-31-2004  06:27:50   Sunset 08-31-2004  19:32:57
          Sunrise  09-01-2004  06:28:46   Sunset 09-01-2004  19:31:22
          Sunrise  09-02-2004  06:29:43   Sunset 09-02-2004  19:29:47
          ..[values omitted ]
          Sunrise  10-28-2004  07:25:31   Sunset 10-28-2004  18:02:34
          Sunrise  10-29-2004  07:26:38   Sunset 10-29-2004  18:01:19
          Sunrise  10-30-2004  07:27:46   Sunset 10-30-2004  18:00:06
          Sunrise  10-31-2004  06:28:53   Sunset 10-31-2004  16:58:54
          Sunrise  11-01-2004  06:30:01   Sunset 11-01-2004  16:57:44
          Sunrise  11-02-2004  06:31:10   Sunset 11-02-2004  16:56:35

       Compare 10-30-2004 with 10-31-2004. Sunrise is an hour earlier because
       daylight saving time has ended, just as predicted.

       There is an easier way to switch between timezones. Take a look at the
       directory zoneinfo as follows:

            $ ls /usr/share/zoneinfo

            Africa      Chile    Factory    Iceland      Mexico    posix       UCT
            America     CST6CDT  GB         Indian       Mideast   posixrules  Universal
            Antarctica  Cuba     GB-Eire    Iran         MST       PRC         US
            Arctic      EET      GMT        iso3166.tab  MST7MDT   PST8PDT     UTC
            Asia        Egypt    GMT0       Israel       Navajo    right       WET
            Atlantic    Eire     GMT-0      Jamaica      NZ        ROC         W-SU
            Australia   EST      GMT+0      Japan        NZ-CHAT   ROK         zone.tab
            Brazil      EST5EDT  Greenwich  Kwajalein    Pacific   Singapore   Zulu
            Canada      Etc      Hongkong   Libya        Poland    SystemV
            CET         Europe   HST        MET          Portugal  Turkey

       TZ can be set to any one of these files. Some of these are directories and contain
       subdirectories, such as ./posix/America. This way you don not have to enter the
       timezone, offset, and range for dst, since it has already been calculated.

           $ export TZ=:/usr/share/zoneinfo/posix/America/Aruba
           $ export TZ=:/usr/share/zoneinfo/Egypt


         Reference:
          http://prdownloads.sourceforge.net/cpearls/date_calc.tar.gz?download

          Also see  (TIP 27).
          Also see  (TIP 103) using chrony which is very similiar to ntpd.
          Note time settings can usually be found in /etc/sysconfig/clock
         



TIP 2:

     cpio works like tar, only better.

     STEP 1 (Create two directories with data ../dir1 an ../dir2)

          mkdir -p ../dir1
          mkdir -p ../dir2
          cp /etc/*.conf ../dir1/.
          cp /etc/*.cnf ../dir2/.

          Which will backup all your cnf and conf files.

     STEP 2 (Piping the files to tar)

          cpio works like tar but can take input
          from the "find" command.

           $ find ../dir1/ | cpio -o --format=tar > test.tar
               or
           $ find ../dir1/ | cpio -o -H tar > test2.tar

          Same command without the ">"

           $ find ../dir1/ | cpio -o --format=tar -F test.tar
              or
           $ find ../dir1/ | cpio -o -H tar -F test2.tar

          Using append

           $ find ../dir1/ | cpio -o --format=tar -F test.tar
             or
           $ find ../dir2/ | cpio -o --format=tar --append -F test.tar

     STEP 3 (List contents of the tar file)

          $ cpio -it < test.tar
                or
          $ cpio -it -F test.tar

     STEP 4 (Extract the contents)

          $ cpio -i -F test.tar



TIP 3:

     Working with tar. The basics with encryption.

     STEP 1 (Using the tar command on the directory /stuff)

          Suppose you have a directory /stuff
          To tar everything in stuff to create a ".tar" file.

          $ tar -cvf stuff.tar stuff

          Which will create "stuff.tar".

     STEP 2 (Using the tar command to create a ".tar.gz" of /stuff)

          $ tar -czf stuff.tar.gz stuff

     STEP 3 (List the files in the archive)

          $ tar -tzf stuff.tar.gz
               or
          $ tar -tf stuff.tar

     STEP 4 (A way to list specific files)

          Note, pipe the results to a file and edit

           $ tar -tzf stuff.tar.gz > mout

          Then, edit mout to only include the files you want

           $ tar -T mout -xzf stuff.tar.gz

          The above command will only get the files in mout.
          Of couse, if you want them all

           $ tar -xzf stuff.tar.gz

     STEP 5 (ENCRYPTION)

           $ tar -zcvf - stuff|openssl des3 -salt -k secretpassword | dd of=stuff.des3

          This will create stuff.des3...don't forget the password you
          put in place of  secretpassword. This can be done interactively as
          well.

            $ dd if=stuff.des3 |openssl des3 -d -k secretpassword|tar zxf -

     NOTE:  above there is a "-" at the end... this will
            extract everything.



TIP 4:

     Creating a Virtual File System and Mounting it with a Loopback Device.

     STEP 1 (Construct a 10MB file)

           $ dd if=/dev/zero of=/tmp/disk-image count=20480

          By default dd uses block of 512 so the size will be 20480*512

     STEP 2 (Make an ext2 or ext3 file system) -- ext2 shown here.

           $ mke2fs -q

          or if you want ext3

           $ mkfs -t ext3 -q /tmp/disk-image

          yes, you can even use reiser, but you'll need to create a bigger
          disk image. Something like "dd if=/dev/zero of=/tmp/disk-image count=50480".

           $ mkfs -t reiserfs -q /tmp/disk-image

          Hit yes for confirmation.  It only asks this because it's a file


     STEP 3 (Create a directory "virtual-fs" and mount. This has to be done as root)

           $ mkdir /virtual-fs
           $ mount -o loop=/dev/loop0 /tmp/disk-image /virtual-fs

         SPECIAL NOTE: if you mount a second device you will have to increase the
                       loop count: loop=/dev/loop1, loop=/dev/loop2, ... loop=/dev/loopn

          Now it operates just like a disk. This virtual filesystem can be mounted
          when the system boots by adding the following to the "/etc/fstab" file. Then,
          to mount, just type "mount /virtual-fs".

                 /tmp/disk-image /virtual-fs ext2               rw,loop=/dev/loop0 0 0

     STEP 4 (When done, umount it)

           $ umount /virtual-fs


     SPECIAL NOTE: If you are using Fedora core 2, in the /etc/fstab you can take
              advantage of acl properties for this mount. Note the acl next to the
              rw entry. This is shown here with ext3.

                 /tmp/disk-image     /virtual-fs ext3    rw,acl,loop=/dev/loop1 0 0

              Also, if you are using Fedora core 2 and above, you can mount the file
              on a cryptoloop.

                $ dd if=/dev/urandom of=disk-aes count=20480


                $ modprobe loop
                $ modprobe cryptoloop
                $ modprobe aes

                $ losetup -e aes /dev/loop0 disk-aes
                $ mkfs -t ext2 /dev/loop0
                $ mount -o loop,encryption=aes disk-aes <mount point>


              If you do not have Fedora core 2, then, you can build the kernel from source
              with some of the following options (not complete, yet)
               reference:
     http://cvs.sourceforge.net/viewcvs.py/cpearls/cpearls/src/posted_on_sf/acl/ehd.pdf?rev=1.1&view=log

                      Cryptographic API Support (CONFIG_CRYPTO)
                      generic loop cryptographic (CONFIG_CRYPTOLOOP)
                      Cryptographic ciphers (CONFIG_CIPHERS)
                      Enable one or more  ciphers  (CONFIG CIPHER .*) such as AES.


     HELPFUL INFORMATION: It is possible to bind mount partitions, or associate the
                     mounted partition to a directory name.

                  # mount --bind  /virtual-fs      /home/mchirico/vfs

             Also, if you want to see what filesystems are currently mounted, "cat" the
             file "/etc/mtab"

                  $ cat /etc/mtab

     Also see TIP 91.



TIP 5:

     Setting up 2 IP address on "One" NIC. This example is on ethernet.

     STEP 1 (The settings for the initial IP address)

           $ cat /etc/sysconfig/network-scripts/ifcfg-eth0

            DEVICE=eth0
            BOOTPROTO=static
            BROADCAST=192.168.99.255
            IPADDR=192.168.1.155
            NETMASK=255.255.252.0
            NETWORK=192.168.1.0
            ONBOOT=yes

     STEP 2 (2nd IP address: )

           $ cat /etc/sysconfig/network-scripts/ifcfg-eth0:1

            DEVICE=eth0:1
            BOOTPROTO=static
            BROADCAST=192.168.99.255
            IPADDR=192.168.1.182
            NETMASK=255.255.252.0
            NETWORK=192.168.1.0
            ONBOOT=yes

     SUMMARY  Note, in STEP 1 the filename is "ifcfg-eth0", whereas in
              STEP 2 it's "ifcfg-eth0:1" and also not the matching
              entries for "DEVICE=...".  Also, obviously, the
              "IPADDR" is different as well.



TIP 6:

     Sharing Directories Among Several Users.

     Several people are working on a project in "/home/share"
     and they need to create documents and programs so that
     others in the group can edit and execute these documents
     as needed. Also see (TIP 186) for adding existing users
     to groups.

       $  /usr/sbin/groupadd share
       $  chown -R root.share /home/share
       $  /usr/bin/gpasswd -a <username> share
       $  chmod 2775 /home/share

       $  ls -ld /home/share
             drwxrwsr-x    2 root     share        4096 Nov  8 16:19 /home/share
                   ^---------- Note the s bit, which was set with the chmod 2775

       $  cat /etc/group
          ...
           share:x:502:chirico,donkey,zoe
          ...          ^------- users are added to this group.

     The user may need to login again to get access. Or, if the user is currently
     logged in, they can run the following command:

       $ su - <username>

     Note, the above step is recommended over  "newgrp - share" since currently
     newgrp in FC2,FC3, and FC4 gets access to the group but the umask is not
     correctly formed.

     As root you  can test their account.

       $ su - <username>   "You need to '-' to pickup thier environment  '$ su - chirico' "

     Note: SUID, SGID, Sticky bit. Only the left most octet is examined, and "chmod 755" is used
          as an example of the full command. But, anything else could be used as well. Normally
          you'd want executable permissions.

        Octal digit  Binary value      Meaning                           Example usage
            0           000       all cleared                             $ chmod 0755 or chmod 755
            1           001       sticky                                  $ chmod 1755
            2           010       setgid                                  $ chmod 2755
            3           011       setgid, sticky                          $ chmod 3755
            4           100       setuid                                  $ chmod 4755
            5           101       setuid, sticky                          $ chmod 5755
            6           110       setuid, setgid                          $ chmod 6755
            7           111       setuid, setgid, sticky                  $ chmod 7755

     A few examples applied to a directory below. In the first example all users in the group can
     add files to directory "dirA" and they can delete their own files. Users cannot delete other
     user's files.

        Sticky bit:
           $ chmod 1770  dirA

     Below files created within the directory have the group ID of the directory, rather than that
     of the default group setting for the user who created the file.

        Set group ID bit:
           $ chmod 2755  dirB




TIP 7:

     Getting Infomation on Commands

     The "info" is a great utility for getting information about the system.
     Here's a quick key on using "info" from the terminal prompt.

       'q' exits.
       'u' moves up to the table of contents of the current section.
       'n' moves to the next chapter.
       'p' moves to the previous chapter.
       'space' goes into the selected section.


      The following is a good starting point:

        $ info coreutils

      Need to find out what a certain program does?

        $ whatis  open
       open   (2)  - open and possibly create a file or device
       open   (3)  - perl pragma to set default PerlIO layers for input and output
       open   (3pm)  - perl pragma to set default PerlIO layers for input and output
       open   (n)  - Open a file-based or command pipeline channel

      To get specific information about the open commmand

        $ man 2 open

       also try 'keyword' search, which is the same as the apropos command.
       For example, to find all the man pages on selinux, type the following:

        $ man -k selinux

       or the man full word search. Same as whatis command.

        $ man -f <some string>

       This is a hint once you are inside man.

        space      moves forward one page
        b          moves backward
        y          scrolls up one line "yikes, I missed it!"
        g          goes to the beginning
        q          quits
        /<string>  search, repeat seach n
        m          mark, enter a letter like "a", then, ' to go back
        '          enter a letter that is marked.



       To get section numbers

        $ man 8 ping

       Note the numbers are used as follows
         (This is OpenBSD)

         1  General Commands
         2  System Calls and Error Numbers
         3  C Libraries
         3p perl
         4  Devices and device drivers
         5  File Formats and config files
         6  Game instructions
         7  Miscellaneous information
         8  System maintenance
         9  Kernel internals

       To find the man page directly, "ls" command:

         $ whereis -m ls
         ls: /usr/share/man/man1/ls.1.gz /usr/share/man/man1/ls.1 /usr/share/man/man1p/ls.1p

       To read this file directly, do the following:

         $ man /usr/share/man/man1/ls.1.gz

       If you want to know the manpath, execute manpath.

         $ manpath
         /usr/share/man:/usr/X11R6/man:/usr/local/share/man:/usr/local/pgsql/man:/usr/man:/usr/local/man



TIP 8:

     How to Put a "Running Job" in the Background.

     You're running a job at the terminal prompt, and it's taking
     a very long time. You want to put the job in the backgroud.

       "CTL - z" Temporarily suspends the job
       $ jobs     This will list all the jobs
       $ bg %jobnumber (bg %1)  To run in the background
       $ fg %jobnumber          To bring back in the foreground

     Need to kill all jobs -- say you're using several suspended
     emacs sessions and you just want everything to exit.

       $ kill -9  `jobs -p`

     The "jobs -p" gives the process number of each job, and the
     kill -9 kills everything. Yes, sometimes "kill -9" is excessive
     and you should issue a "kill -15" that allows jobs to clean-up.
     However, for exacs session, I prefer "kill -9" and haven't had
     a problem.

     Sometimes you need to list the process id along with job
     information. For instance, here's process id with the listing.

       $ jobs -l

     Note you can also renice a job, or give it lower priority.

       $ nice -n +15 find . -ctime 2 -type f  -exec ls {} \; > last48hours
        ^z
       $  bg

     So above that was a ctl-z to suppend. Then, bg to run it in
     the background. Now, if you want to change the priority lower
     you just renice it, once you know the process id.

       $ jobs -pl
   [1]+ 29388 Running                 nice -n +15 find . -ctime 2 -exec ls -l {} \; >mout &

       $ renice +30 -p 29388
        29388: old priority 15, new priority 19

      19 was the lowest priority for this job. You cannot increase
      the priority unless you are root.



TIP 9:

     Need to Delete a File for Good -- not even GOD can recover.

     You have a file "secret".  The following makes it so no one
     can read it.  If the file was 12 bytes, it's now 4096 after it
     has been over written 100 times.  There's no way to recover this.

       $ shred -n 100 -z secret

     Want to remove the file? Use the "u" option.

       $ shred -n 100 -z -u test2

     It can be applied to a device

       $ shred -n 100 -z -u /dev/fd0


       CAUTION: Note that shred relies on a very important assumption: that the file system  overwrites  data
       in  place.   This is the traditional way to do things, but many modern file system designs do not sat-
       isfy this assumption.  The following are examples of file systems on which shred is not effective,  or
       is not guaranteed to be effective in all file system modes:

       * log-structured or journaled file systems, such as those supplied with

              AIX and Solaris (and JFS, ReiserFS, XFS, Ext3, etc.)



     Also see (TIP 52).



TIP 10:

     Who and What is doing What on Your System - finding open sockets,
     files etc.

       $ lsof
          or as root
       $ watch lsof -i

     To list all open Internet files, use:

       $ lsof -i -U

       (See TIP 118)

     Also try fuser. Suppose you have a mounted file-system, and you need
     to umount it. To list the users on the file-system /work

       $ fuser -u /work

     To kill all processes accessing the file system /work  in  any way.

       $ fuser -km /work

     Or better yet, maybe you want to eject a cdrom on /mnt/cdrom

       $ fuser -km /mnt/cdrom


     If you need IO load information about your system, you can execute
     iostat. But note, the very first iostat gives a snapshot since
     the last boot. You typically want the following command, which gives
     you 3 outputs every 5 seconds.

       $ iostat -xtc 5 3
       Linux 2.6.12-1.1376_FC3smp (squeezel.squeezel.com) 	10/05/2005

       Time: 07:05:04 PM
       avg-cpu:  %user   %nice %system %iowait   %idle
                  0.97    0.06    1.94    0.62   96.41

       Time: 07:05:09 PM
       avg-cpu:  %user   %nice %system %iowait   %idle
                  0.60    0.00    1.70    0.00   97.70

       Time: 07:05:14 PM
       avg-cpu:  %user   %nice %system %iowait   %idle
                  1.00    0.00    1.60    0.00   97.39

     vmstat reports memory statistics.


       $ vmstat
       $ ifconfig
       $ cat /proc/sys/vm/.. (entries under here)


      *NOTE: (TIP 77) shows sample usage of "ifconfig". Also
       (TIP 84) shows sample output of "$ cat /proc/cpuinfo". You can download iostat
       and other packages from (http://perso.wanadoo.fr/sebastien.godard/download_en.html).
       You also may want to look at iozone (TIP 178).

     Also

       $ cat /proc/meminfo
       $ cat /proc/stat

       $ cat /proc/uptime
       1078623.55 1048008.34       First number is the number of seconds since boot.
                                   The second number is the number of idle seconds.

       $ cat /proc/loadavg
       0.25 0.14 0.10 1/166 7778   This shows load at 1,5, and 15 minutes,
                                   a total of 1 current running process out
                                   from a total of 166. The 7778 is the last
                                   process id used.
                                   Ref: http://www.teamquest.com/resources/gunther/ldavg1.shtml

     Or current process open file descriptors

        $ ls -l /proc/self/fd/0
            lrwx------    1 chirico  chirico        64 Jun 29 13:17 0 -> /dev/pts/51
            lrwx------    1 chirico  chirico        64 Jun 29 13:17 1 -> /dev/pts/51
            lrwx------    1 chirico  chirico        64 Jun 29 13:17 2 -> /dev/pts/51
            lr-x------    1 chirico  chirico        64 Jun 29 13:17 3 -> /proc/26667/fd

      So you could, $ echo "stuff" > /dev/pts/51, to get output. Note, tree is also
      helpful here:

         $ tree /proc/self

            /proc/self
            |-- auxv
            |-- cmdline
            |-- cwd -> /work/souptonuts/documentation/theBook
            |-- environ
            |-- exe -> /usr/bin/tree
            |-- fd
            |   |-- 0 -> /dev/pts/51
            |   |-- 1 -> /dev/pts/51
            |   |-- 2 -> /dev/pts/51
            |   `-- 3 -> /proc/26668/fd
            |-- maps
            |-- mem
            |-- mounts
            |-- root -> /
            |-- stat
            |-- statm
            |-- status
            |-- task
            |   `-- 26668
            |       |-- auxv
            |       |-- cmdline
            |       |-- cwd -> /work/souptonuts/documentation/theBook
            |       |-- environ
            |       |-- exe -> /usr/bin/tree
            |       |-- fd
            |       |   |-- 0 -> /dev/pts/51
            |       |   |-- 1 -> /dev/pts/51
            |       |   |-- 2 -> /dev/pts/51
            |       |   `-- 3 -> /proc/26668/task/26668/fd
            |       |-- maps
            |       |-- mem
            |       |-- mounts
            |       |-- root -> /
            |       |-- stat
            |       |-- statm
            |       |-- status
            |       `-- wchan
            `-- wchan

            10 directories, 28 files

     Need a listing of the system settings?

       $ sysctl -a

     Need IPC (Shared Memory Segments, Semaphore Arrays, Message Queue) status
     etc?

       $ ipcs
       $ ipcs -l  "This gives limits"

     Need to "watch" everything a user does?  The following watches donkey.

       $ watch lsof -u donkey

     Or, to see what in  going on in directory "/work/junk"

       $ watch lsof +D /work/junk



TIP 11:

     How to make a File "immutable" or "unalterable" -- it cannot be changed
     or deleted even by root. Note this works on (ext2/ext3) filesystems.
     And, yes, root can delete after it's changed back.

     As root:

       $ chattr +i filename

     And to change it back:

       $ chattr -i filename

     List attributes

       $ lsattr filename



TIP 12:

     SSH - How to Generate the Key Pair.


     On the local server

       $  ssh-keygen -t dsa -b 2048

     This will create the two files:

            .ssh/id_dsa (Private key)
            .ssh/id_dsa.pub  (Public key you can share)

     Next insert ".ssh/id_dsa.pub" on the remote server
     in the file  ".ssh/authorized_keys" and ".ssh/authorized_keys2"
     and change the  permission of each file to (chmod 600). Plus, make
     sure the directory ".ssh" exists on the remote computer with 700 rights.
     Ok, assuming  192.168.1.155 is the remote server and "donkey" is the
     account on that remote server.

       $ ssh donkey@192.168.1.155 "mkdir -p .ssh"
       $ ssh donkey@192.168.1.155 "chmod 700 .ssh"
       $ scp ./.ssh/id_dsa.pub  donkey@192.168.1.155:.ssh/newkey.pub

     Now connect to that remote server "192.168.1.155" and add .ssh/newkey.pub
     to both "authorized_keys" and "authorized_keys2".  When done, the permission
     on
       (This is on the remote server)

        $chmod 600 .ssh/authorized_key*

     Next, go back to the local server and issue the following:

        $ ssh-agent $SHELL
        $ ssh-add

     The "ssh-add" will allow you to enter the passphrase and it will
     save it for the current login session.

     You don't have to enter a password when running "ssh-keygen" above. But,
     remember anyone with root access can "su - <username>" and then connect
     to your computers.  It's harder, however, not impossible, for root to do
     this if  you have a password.

     (Reference TIP 151)



TIP 13:

     Securing the System: Don't allow root to login remotely.  Instead,
     the admin could login as another account, then, "su -".  However,
     root can still login "from the local terminal".

     In the "/etc/ssh/sshd_config" file change the following lines:

        Protocol 2
        PermitRootLogin no
        PermitEmptyPasswords no

     Then, restart ssh

        /etc/init.d/sshd restart

     Why would you want to do this?  It's not possible for anyone to guess
     or keep trying the root account.  This is especially good for computers
     on the Internet. So, even if the "root" passwords is known, they can't
     get access to the system remotely.  Only from the terminal, which is locked
     in your computer room. However, if anyone has a account on the server,
     then, they can login under their  account then "su -".

     Suppose you only want a limited number of users:  "mchirico" and "donkey".
     Add the following line to "/etc/ssh/sshd_config". Note, this allows access
     for chirico and donkey, but everyone else is denied.

         #  Once you add AllowUsers - everyone else is denied.
         AllowUsers mchirico donkey



TIP 14:

     Keep Logs Longer with Less Space.

     Normally logs rotate monthly, over writing all the old data.  Here's a
     sample "/etc/logrotate.conf" that will keep 12 months of backup
     compressing the logfiles

       $ cat /etc/logrotate.conf

             # see "man logrotate" for details
             # rotate log files weekly
             #chirico changes to monthly
             monthly

             # keep 4 weeks worth of backlogs
             # keep 12 months of backup
             rotate 12

             # create new (empty) log files after rotating old ones
             create

             # uncomment this if you want your log files compressed
             compress

             # RPM packages drop log rotation information into this directory
             include /etc/logrotate.d

             # no packages own wtmp -- we'll rotate them here
             /var/log/wtmp {
                 monthly
                 create 0664 root utmp
                 rotate 1
             }

             # system-specific logs may be also be configured here.


       Note: see tip 1. The clock should always be correctly set.



TIP 15:

     What Network Services are Running?

          $ netstat -atup

     or

          $ netstat -ap|grep LISTEN|less

     This can be helpful to determine the services running.

     Need stats on dropped UDP packets?

          $ netstat -s -u

     or TCP

          $ netstat -s -t

     or summary of everything

          $ netstat -s

     or looking for error rates on the interface?

          $ netstat -i

     Listening interfaces?

          $ netstat -l

     (Tip above provided by Amos Shapira)

     Also see TIP 77.



TIP 16:

     Apache: Creating and Using an ".htaccess" File


     Below is a sample ".htaccess" file which goes in
     "/usr/local/apache/htdocs/chirico/alpha/.htaccess" for this
     example


         AuthUserFile /usr/local/apache/htdocs/chirico/alpha/.htpasswd
         AuthGroupFile /dev/null
         AuthName "Your Name and regular password required"
         AuthType Basic

         <Limit GET POST>
         require valid-user
         </Limit>

    In order for this to work /usr/local/apache/conf/httpd.conf must
    have the following line in it:


       #
       <Directory /usr/local/apache/htdocs/chirico/alpha>
           AllowOverride FileInfo AuthConfig Limit
           Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
           <Limit GET POST OPTIONS PROPFIND>
               Order allow,deny
               Allow from all
           </Limit>
           <LimitExcept GET POST OPTIONS PROPFIND>
               Order deny,allow
               Deny from all
           </LimitExcept>
       </Directory>



    Also, a password file must be created

      $ /usr/local/apache/bin/htpasswd -c .htpasswd chirico

    And enter the user names and passwords.

    Next Reload Apache:

      $ /etc/init.d/httpd reload

    (Reference TIP 213 limit access to certain directories based on IP address).



TIP 17:

     Working with "mt" Commands: reading and writing to tape.

     The following assumes the tape device is "/dev/st0"

     STEP 1 ( rewind the tape)

          # mt -f /dev/nst0 rewind

     STEP 2 (check to see if you are at block 0)

          # mt -f /dev/nst0 tell
            At block 0.

     STEP 3 (Backup "tar compress"  directories "one"  and "two")

          # tar -czf /dev/nst0 one two

     STEP 4 (Check to see what block you are at)

           # mt -f /dev/nst0 tell

       You should get something like block 2 at this point.

     STEP 5 (Rewind the tape)

           # mt -f /dev/nst0 rewind

     STEP 6 (List the files)

           # tar -tzf /dev/nst0
              one/
              one/test
              two/

     STEP 7 (Restore directory "one"  into directory "junk").  Note, you
          have to first rewind the tape, since the last operation moved
          ahead 2 blocks. Check this with "mt -f /dev/nst0".

           # cd junk
           # mt -f /dev/nst0 rewind
           # mt -f /dev/nst0 tell
              At block 0.
           # tar -xzf /dev/nst0 one

     STEP 8 (Next, take a look to see what block the tape is at)

           # mt -f /dev/nst0 tell
              At block 2.

     STEP 9 (Now backup directories three  and four)

           # tar -czf /dev/nst0 three four

       After backing up the files, the tape should be past block 2.
       Check this.

           # mt -f /dev/nst0 tell
             At block 4.

          Currently the following exist:

                At block 1:
                     one/
                    one/test
                    two/

                At block 2:
                    three/
                    three/samplehere
                    four/

                At block 4:
                    (* This is empty *)

     A few notes. You can set the blocking factor and a label
     with tar. For example:

      $ tar --label="temp label" --create  --blocking-factor=128 --file=/dev/nst0 Notes

     But note if you try to read it with the default, incorrect blocking
     factor, then, you will get the following error:

        $ tar -t   --file=/dev/nst0
        tar: /dev/nst0: Cannot read: Cannot allocate memory
        tar: At beginning of tape, quitting now
        tar: Error is not recoverable: exiting now

     However this is easily fixed with the correct blocking factor

         $ mt -f /dev/nst0 rewind
         $ tar -t --blocking-factor=128 --file=/dev/nst0
         temp label
         Notes

     Take advantage of the label command.

         $ MYCOMMENTS="Big_important_tape"
         $ tar --label="$(date +%F)"+"${MYCOMMENTS}"

     Writing to tape on a remote 192.168.1.155 computer

         $ tar cvzf - ./tmp | ssh -l chirico 192.168.1.155 '(mt -f /dev/nst0 rewind; dd of=/dev/st0 )'

     Restoring the contents from tape on a remote computer

         $ ssh -l chirico 192.168.1.155 '(mt -f /dev/nst0 rewind; dd if=/dev/st0  )'|tar xzf -

     Getting data off of tape with dd command with odd blocking factor. Just set ibs very high

         $ mt -f /dev/nst0 rewind
         $ tar --label="Contenets of Notes" --create  --blocking-factor=128 --file=/dev/nst0 Notes
         $ mt -f /dev/nst0 rewind
         $ dd ibs=1048576 if=/dev/st0 of=notes.tar

     The above will probably work with ibs=64k as well

        (Also see TIP 136)



TIP 18:

     Encrypting Data to Tape using "tar" and "openssl".

     The following shows an example of writing the contents of "tapetest" to tape:

        $ tar zcvf - tapetest|openssl des3 -salt  -k secretpassword | dd of=/dev/st0

     Reading the data back:

        $ dd if=/dev/st0|openssl des3 -d -k secretpassword|tar xzf -



TIP 19:

     Mounting an ISO Image as a Filesystem -- this is great if you don't have the DVD
         hardware, but, need to get at the data.  The following show an example of
         mounting the Fedora core 2 as a file.

         $ mkdir /iso0
         $ mount -o loop -t iso9660 /FC2-i386-DVD.iso  /iso0

     Or to mount automatically at boot, add the following to "/etc/fstab"

         /FC2-i386-DVD.iso /iso0     iso9660 rw,loop  0 0


      Reference: http://umn.dl.sourceforge.net/sourceforge/souptonuts/README_fedora.txt



TIP 20:

     Getting Information about the Hard drive and list all PCI devices.

                $ hdparm /dev/hda

                  /dev/hda:
                   multcount    = 16 (on)
                   IO_support   =  0 (default 16-bit)
                   unmaskirq    =  0 (off)
                   using_dma    =  1 (on)
                   keepsettings =  0 (off)
                   readonly     =  0 (off)
                   readahead    = 256 (on)
                   geometry     = 16383/255/63, sectors = 234375000, start = 0

            or for SCSI

                $ hdparm /dev/sda

            Try it with the -i option for information

                $ hdparm -i /dev/hda

                /dev/hda:

                Model=IC35L120AVV207-1, FwRev=V24OA66A, SerialNo=VNVD09G4CZ6E0T
                Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
                RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
                BuffType=DualPortCache, BuffSize=7965kB, MaxMultSect=16, MultSect=16
                CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234375000
                IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
                PIO modes:  pio0 pio1 pio2 pio3 pio4
                DMA modes:  mdma0 mdma1 mdma2
                UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
                AdvancedPM=yes: disabled (255) WriteCache=enabled
                Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:  2 3 4 5 6

            How fast is your drive?

                $ hdparm -tT /dev/hda

                /dev/hda:
                Timing buffer-cache reads:   128 MB in  0.41 seconds =315.32 MB/sec
                Timing buffered disk reads:  64 MB in  1.19 seconds = 53.65 MB/sec

            Need to find your device?

                $ mount
                   or
                $ cat /proc/partitions
                   or
                $ dmesg | egrep '^(s|h)d'

                   which for my system lists:

                      hda: IC35L120AVV207-1, ATA DISK drive
                      hdc: Lite-On LTN486S 48x Max, ATAPI CD/DVD-ROM drive
                      hda: max request size: 1024KiB
                      hda: 234375000 sectors (120000 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)

             By the way, if you want to turn on dma

                 $ hdparm -d1 /dev/hda
                   setting using_dma to 1 (on)
                   using_dma    =  1 (on)

         (Also see TIP 122 )

     List all PCI devices

                $ lspci -v

          00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev
                  Subsystem: Dell Computer Corporation: Unknown device 0160
                  Flags: bus master, fast devsel, latency 0
                  Memory at f0000000 (32-bit, prefetchable) [size=128M]
                  Capabilities: <available only to root>

              ... lots more ...

           Note, there is also lspci -vv for even more information.

          (Also see TIP 200)

TIP 21:

     Setting up "cron" Jobs.

     If you want to use the emacs editor for editing cron jobs, then,
     set the following in your "/home/user/.bash_profile"

        EDITOR=emacs

     Then, to edit cron jobs

        $ crontab -e

     You may want to put in the following header

        #MINUTE(0-59) HOUR(0-23) DAYOFMONTH(1-31) MONTHOFYEAR(1-12) DAYOFWEEK(0-6) Note 0=Sun and 7=Sun
        #
        #14,15 10 * * 0   /usr/bin/somecommmand  >/dev/null 2>&1

     The sample "commented out command" will run at 10:14 and 10:15 every Sunday.  There will
     be no "mail" sent to the user because of the ">/dev/null 2>&1" entry.

        $ crontab -l

     The above will list all cron jobs. Or if you're root

        $ crontab -l -u <username>
        $ crontab -e -u <username>

     Reference "man 5 crontab":

        The time and date fields are:

                     field          allowed values
                     -----          --------------
                     minute         0-59
                     hour           0-23
                     day of month   1-31
                     month          1-12 (or names, see below)
                     day of week    0-7 (0 or 7 is Sun, or use names)

              A field may be an asterisk (*), which always stands for ``first-last''.

              Ranges of numbers are allowed.  Ranges are two numbers separated with a
              hyphen.   The  specified  range is inclusive.  For example, 8-11 for an
              ``hours'' entry specifies execution at hours 8, 9, 10 and 11.

              Lists are allowed.  A list is a set of numbers (or ranges) separated by
              commas.  Examples: ``1,2,5,9'', ``0-4,8-12''.

              Ranges can include "steps", so "1-9/2" is the same as "1,3,5,7,9".

     Note, you can run just every 5 minutes as follows:

              */5 * * * * /etc/mrtg/domrtg  >/dev/null 2>&1

     To run jobs hourly,daily,weekly or monthly you can add shell scripts into the
     appropriate directory:

             /etc/cron.hourly/
             /etc/cron.daily/
             /etc/cron.weekly/
             /etc/cron.monthly/

     Note that the above are pre-configured schedules set in "/etc/crontab", so
     if you want, you can change the schedule. Below is my /etc/crontab:

           $ cat /etc/crontab
           SHELL=/bin/bash
           PATH=/sbin:/bin:/usr/sbin:/usr/bin
           MAILTO=root
           HOME=/

           # run-parts
           01 * * * * root run-parts /etc/cron.hourly
           02 4 * * * root run-parts /etc/cron.daily
           22 4 * * 0 root run-parts /etc/cron.weekly
           42 4 1 * * root run-parts /etc/cron.monthly



TIP 22:

     Keeping Files in Sync Between Servers.

     The remote computer is "192.168.1.171" and has the account "donkey".  You want
     to "keep in sync" the files under "/home/cu2000/Logs" on the remote computer
     with files on "/home/chirico/dev/MEDIA_Server" on the local computer.

       $ rsync  -Lae ssh  donkey@192.168.1.171:/home/cu2000/Logs /home/chirico/dev/MEDIA_Server

     "rsync" is a convient command for keeping files in sync, and as shown here will work
     through ssh.  The -L option tells rsync to treat symbolic links like ordinary files.

        Also see [http://www.rsnapshot.org/]



TIP 23:

     Looking up the Spelling of a Word.

        $ look <partial spelling>

     so the following will list all words that
     start with stuff

        $ look stuff
           stuff
           stuffage
           stuffata
           stuffed
           stuffender
           stuffer
           stuffers
           stuffgownsman
           stuffier
           stuffiest
           stuffily
           stuffiness
           stuffinesses
           stuffiness's
           stuffing
           stuffings
           stuffing's
           stuffless
           stuffs
           stuffy

     It helps to have a large "linuxwords" dictionary.  You can download
     a much bigger dictionary from the following:

              http://prdownloads.sourceforge.net/souptonuts/linuxwords.1.tar.gz?download

     Note: vim users can setup the .vimrc file with the following. Now when you type 
       CTL-X CTL-T in insert mode, you'll get a thesaurus lookup.

           set dictionary+=/usr/share/dict/words
           set thesaurus+=/usr/share/dict/words

     Or, you can call aspell with the F6 command after putting the folling entry in your
     .vimrc file

           :nmap <F6> :w<CR>:!aspell -e -c %<CR>:e<CR>

     Now, hit F6 when you're in vim, and you'll get a spell checker.


     There is also an X Windows dictionary that runs with the following command.

           $ gnome-dictionary



TIP 24:

     Find out if a Command is Aliased.

         $ type -all <command>

     Example:

         $ type -all ls
            ls is aliased to `ls --color=tty'
            ls is /bin/ls



TIP 25:

     Create a Terminal Calculator

      Put the following in your .bashrc file

            function calc
            {
             echo "${1}"|bc -l;
            }

      Or, run it at the shell prompt. Now
      "calc" from the shell will work as follows:

            $ calc 3+45
               48

      All functions  with a "(" or ")" must be enclosed
      in quotes.  For instance, to get the sin of .4

            $ calc "s(.4)"
              .38941834230865049166

          (See TIP 115 using the expr command)



TIP 26:

     Kill a User and All Their Current Processes.


        #!/bin/bash
        #  This program will kill all processes from a
        #  user.  The user name is read from the command line.
        #
        #  This program also demonstrates reading a bash variable
        #  into an awk script.
        #
        #  Usage: kill9user <user>
        #
        kill -9 `ps aux|awk -v var=$1 '$1==var { print $2 }'`

    or if you want want to create the above script the command
    below will kill the user "donkey" and all of his processes.

        $ kill -9 `ps aux|awk -v var="donkey" '$1==var { print $2 }'`

    Check their cron jobs and "at" jobs, if you have a security issue.

          $ crontab -u <user> -e

    Lock the account:

          $ passwd -l <user>

    Remove all authorized_keys

          $ rm /home/user/.shosts
          $ rm /home/user/.rhosts
          $ rm -rf /home/user/.ssh
          $ rm /home/user/.forward

      or consider

          $ mv /home/user  /home/safeuser


    Change the shell

          $ chsh -s /bin/true <user>

    Do an inventory

          $ find / -user <user>  > list_of_user_files

    NOTE: Also see (TIP 10).

    To see all users, except the current user. Do not use the
    dash "ps -aux" is wrong but the following is correct:

          $ ps aux| awk '!/'${USER}'/{printf("%s \n",$0)}'

     or (ww = wide, wide output)

          $ ps auwwx| awk '!/'${USER}'/{printf("%s \n",$0)}'


    The following codes may be useful:

       D    Uninterruptible sleep (usually IO)
       R    Running or runnable (on run queue)
       S    Interruptible sleep (waiting for an event to complete)
       T    Stopped, either by a job control signal or because it is being traced.
       W    paging (not valid since the 2.6.xx kernel)
       X    dead (should never be seen)
       Z    Defunct ("zombie") process, terminated but not reaped by its parent.

    For BSD formats and when the stat keyword is used, additional
       characters may be displayed:

       <    high-priority (not nice to other users)
       N    low-priority (nice to other users)
       L    has pages locked into memory (for real-time and custom IO)
       s    is a session leader
       l    is multi-threaded (using CLONE_THREAD, like NPTL pthreads do)
       +    is in the foreground process group


    Also see TIP 28. and TIP 89.



TIP 27:

     Format Dates for Logs and Files

         $ date "+%m%d%y %A,%B %d %Y %X"
             061704 Thursday,June 17 2004 07:13:40 PM

         $ date "+%m%d%Y"
             06172004

         $ date -d '1 day ago' "+%m%d%Y"
             06162004

         $ date -d '3 months 1 day  2 hour  15 minutes 2 seconds ago'

      or to go into the future remove the "ago"

         $ date -d '3 months 1 day  2 hour  15 minutes 2 seconds '

            Also the following works:

                $ date -d '+2 year +1 month -1 week  +3 day -8 hour +2 min -5 seconds'

      Quick question: If there are 100,000,000 stars in the visible sky, and you can
      count them, round the clock, at a rate of a star per second starting now, when
      would you finish counting?  Would you still be alive?

                $ date -d '+100000000 seconds'

      Sooner than you think!

      This can be assigned to variables

         $ mdate=`date -d '3 months 1 day  2 hour  15 minutes 2 seconds ' "+%m%d%Y_%A_%B_%D_%Y_%X"  `
         $ echo $mdate
             09182004_Saturday_September_09/18/04_2004_09:40:41 PM
             ^---- Easy to sort   ^-------^----- Easy to read

      See TIP 28 below.

      See TIP 87 when working with large delta time changes -40 years, or -200 years ago, or even
      1,000,000 days into the future.

      Also see (TIP 1) for working with time zones.



TIP 28:

     Need Ascii Codes? For instance, for printing quotes:

                         awk 'BEGIN { msg = "Don\047t Panic!"; printf "%s \n",msg }'
              or
                         awk 'BEGIN { msg = "Don\x027t Panic!"; printf "%s \n",msg }'

     It's better to use \047, because certain characters that follow \x027 may cause problems.

     For example, take a look at the following two lines. The first line prints a "}" caused
     by the extra D in \x027D. The the line immediately below does not work as expected.

                      awk 'BEGIN {printf("The D causes problems \x027D\n")}'

            However, the line below works fine:

                      awk 'BEGIN {printf("The D does not cause problems \047D\n")}'

     Or if you wanted to use the date command in "awk" to print date.time.nanosecond.timezone for
     each line of a file "test".

     The following date can be used in awk because the single quotes are enclosed within the
     double quotes.

             date '+%m%d%Y.%H%M%S.%N%z'

       $ awk 'BEGIN { "date '+%m%d%Y.%H%M%S.%N%z'" | getline MyDate  } { print MyDate,$0 }' < data

     But it's also possible to replace  "+"  with  \x2B,  "%" with \x25, and "d" with \x64 as follows:

       $ awk 'BEGIN { "date \x27\x2B\x25m\x25\x64\x25Y.\x25H\x25M\x25S.\x25N\x25z\x27" | getline MyDate  } { print MyDate,$0 }' < test

             07062004.113820.346033000-0400 bob 71
             07062004.113820.346033000-0400 tom 43
             07062004.113820.346033000-0400 sal 34
             07062004.113820.346033000-0400 bob 89
             07062004.113820.346033000-0400 tom 66
             07062004.113820.346033000-0400 sal 99

     For this example it's not needed because single quotes are used inside of double quotes; however, there may be times when
     hex replacement is easier.


       $ man ascii

        Oct   Dec   Hex   Char           Oct   Dec   Hex   Char
            -----------------------------------------------------------
            000   0     00    NUL '\0'       100   64    40    @
            001   1     01    SOH            101   65    41    A
            002   2     02    STX            102   66    42    B
            003   3     03    ETX            103   67    43    C
            004   4     04    EOT            104   68    44    D
            005   5     05    ENQ            105   69    45    E
            006   6     06    ACK            106   70    46    F
            007   7     07    BEL '\a'       107   71    47    G
            010   8     08    BS  '\b'       110   72    48    H
            011   9     09    HT  '\t'       111   73    49    I
            012   10    0A    LF  '\n'       112   74    4A    J
            013   11    0B    VT  '\v'       113   75    4B    K
            014   12    0C    FF  '\f'       114   76    4C    L
            015   13    0D    CR  '\r'       115   77    4D    M
            016   14    0E    SO             116   78    4E    N
            017   15    0F    SI             117   79    4F    O
            020   16    10    DLE            120   80    50    P
            021   17    11    DC1            121   81    51    Q
            022   18    12    DC2            122   82    52    R
            023   19    13    DC3            123   83    53    S
            024   20    14    DC4            124   84    54    T
            025   21    15    NAK            125   85    55    U
            026   22    16    SYN            126   86    56    V
            027   23    17    ETB            127   87    57    W
            030   24    18    CAN            130   88    58    X
            031   25    19    EM             131   89    59    Y
            032   26    1A    SUB            132   90    5A    Z
            033   27    1B    ESC            133   91    5B    [
            034   28    1C    FS             134   92    5C    \   '\\'
            035   29    1D    GS             135   93    5D    ]
            036   30    1E    RS             136   94    5E    ^
            037   31    1F    US             137   95    5F    _
            040   32    20    SPACE          140   96    60    `
            041   33    21    !              141   97    61    a
            042   34    22    "              142   98    62    b
            043   35    23    #              143   99    63    c
            044   36    24    $              144   100   64    d
            045   37    25    %              145   101   65    e
            046   38    26    &              146   102   66    f
            047   39    27    '              147   103   67    g
            050   40    28    (              150   104   68    h
            051   41    29    )              151   105   69    i
            052   42    2A    *              152   106   6A    j
            053   43    2B    +              153   107   6B    k
            054   44    2C    ,              154   108   6C    l
            055   45    2D    -              155   109   6D    m
            056   46    2E    .              156   110   6E    n
            057   47    2F    /              157   111   6F    o
            060   48    30    0              160   112   70    p
            061   49    31    1              161   113   71    q
            062   50    32    2              162   114   72    r
            063   51    33    3              163   115   73    s
            064   52    34    4              164   116   74    t
            065   53    35    5              165   117   75    u
            066   54    36    6              166   118   76    v
            067   55    37    7              167   119   77    w
            070   56    38    8              170   120   78    x
            071   57    39    9              171   121   79    y
            072   58    3A    :              172   122   7A    z
            073   59    3B    ;              173   123   7B    {
            074   60    3C    <              174   124   7C    |
            075   61    3D    =              175   125   7D    }
            076   62    3E    >              176   126   7E    ~
            077   63    3F    ?              177   127   7F    DEL



TIP 29:

     Need a WWW Browser for the Terminal Session? Try lynx or elinks.

         $ lynx

     Or to read all these tips, with the latest updates

      $ lynx http://umn.dl.sourceforge.net/sourceforge/souptonuts/How_to_Linux_and_Open_Source.txt


     Or, better yet elinks.

         $ elinks http://somepage.

     You can get elinks at the following site:

             http://elinks.or.cz/



TIP 30:

    screen - screen manager with VT100/ANSI terminal emulation

         This is an excellent utility. But if you work a lot in Emacs,
         then, you should place the following in your ~./.bashrc

             alias s='screen -e^Pa -D -R'

         After loging in again (or source .bashrc) ,
         type the following to load "screen":

             $ s

         If you're using the not using the alias command above, substitute
         CTL-a for CTL-p below. :

             CTL-p CTL-C       To get a new session
             CTL-p  "           To list sessions, and arrow keys to move
             CTL-p SHFT-A      To name sessions
             CTL-p S            To split screens
             CLT-p Q            To unsplit screens
             CLT-p TAB          To switch between screens
             CLT-p :resize n    To resize screen to n rows, on split screen


         Screen is very powerful.  Should you become disconneced, you can
         still resume work after loggin in.

             $ man screen

         The above command will give you more information.



TIP 31:

     Need to Find the Factors of a Number?

           $ factor 2345678992
                2345678992: 2 2 2 2 6581 22277

     It's a quick way to find out if a number is prime

           $ factor 7867
                7867: 7867



TIP 32:

     Less is More -- piping to less to scroll backword and forward

      For large "ls" listings try the followin, then, use the arrow key
      to move up and down the list.

           $ ls /some_large_dir/ | less

                 or

           $ cat some_large_file | less

                 or

           $ less some_large_file



TIP 33:

     C "indent" Settings for Kernel Development

           $ indent -kr -i8  program.c



TIP 34:

     FTP auto-login.  "ftp" to a site and have the password stored.

     For instance, here's a sample ".net" file in a user's home
     directory for uploading to sourceforge. Note, sourceforge will
     take any password, so m@temp.com is used here for login "anonymous".

           $ cat ~/.netrc
               machine upload.sourceforge.net login anonymous password m@temp.com
               default login anonymous password user@site

     It might be a good idea to change the rights on this file

           $ chmod 0400 ~/.netrc


         #!/bin/bash
         #
         #  Sample ftp automated script to download
         #  file to ${dwnld}
         #
         dwnld="/work/faq/unix-faq"
         cd ${dwnld}
         ftp << FTPSTRING
         prompt off
         open rtfm.mit.edu
         cd /pub/usenet-by-group/news.answers/unix-faq/faq
         mget contents
         mget diff
         mget part*
         bye
         FTPSTRING


      (Also see TIP 114 for ncftpget, which is a very powerful restarting
                            ftp program)



TIP 35:

     Bash Brace Expansion

           $ echo f{ee,ie,oe,um}
                fee fie foe fum

     This works with almost any command

           $ mkdir -p /work/junk/{one,two,three,four}



TIP 36:

     Getting a List of Users on the System

           $ cut -d: -f1 /etc/passwd | sort



TIP 37:

     Editing a Bash Command

      Try typing a long command say, then, type "fc" for an easy way
      to edit the command.

           $ find /etc -iname '*.cnf' -exec grep -H 'log' {} \;
           $ fc

      "fc" will bring the last command typed into an editor, "emacs" if
      that's the default editor. Type "fc -l" to list last few commands.

      To seach for a command, try typing "CTL-r" at the shell prompt for
      searching. "CTL-t" to transpose, say "sl" was typed by you want "ls".



      Hints when using "fc: in emacs:

           ESC-b     move one word backward
           ESC-f     move one word forward
           ESC-DEL   kill one word backward
           CTL-k     kill point to end
           CTL-y     un-yank killed region at point



TIP 38:

     Moving around Directories.

     Change to the home directory:
          $ cd ~
            or
          $ cd

     To go back to the last directory
          $ cd -

     Instead of "cd" to a directory try "pushd" and look
     at the heading...you can see a list of directories.

          $ pushd /etc
          $ pushd /usr/local

      Then, to get back "popd" or "popd 1"

      To list all the directories pushed on the stack
      use the "dirs -v" command.

          $ dirs -v
           0  /usr/local
           1  /etc
           2  /work/souptonuts/documentation/theBook

      Now, if you "pushd +1" you will be moved to "/etc", since
      is number "1" on the stack, and this directory will become
      "0".

          $ pwd
           /usr/local
          $ pushd +1
          $ pwd
           /etc

          $ dirs -v
           0  /etc
           1  /work/souptonuts/documentation/theBook
           2  /usr/local



TIP 39:

     Need an Underscore after a Variable?

       Enclose the variable in "{}".

          $echo ${UID}_

       Compare to

          $echo $UID_

       Also try the following:


                $ m="my stuff here"
                $ echo -e ${m// /'\n'}
                        my
                        stuff
                        here



TIP 40:

     Bash Variable Offset and String Operators

        $ r="this is stuff"
        $ echo ${r:3}
        $ echo ${r:5:2}

      Note, ${varname:offset:length}


         ${varname:?message}  If varname exist and isn't null return value, else,
                              print var and message.

           $ r="new stuff"
           $ echo ${r:? "that's r for you"}
               new stuff
           $ unset r
           $ echo ${r:? "that's r for you"}
               bash: r:  that's r for you

         ${varname:+word}    If varname exist and not null return word. Else, return null.

         ${varname:-word}    If varname exist and not null return value. Else, return word.

      Working with arrays in bash - bash arrays.

           $ unset p
           $ p=(one two three)

           $ echo -e "${p[@]}"
           one two three

      or

           $ echo -e "${p[*]}"
           one two three

           $ echo -e "${#p[@]}"
           3

           $ echo -e "${p[0]}"
           one

           $ echo -e "${p[1]}"
           two

            Also see (TIP 95)



TIP 41:

     Loops in Bash


      The command below loops through directories listed in $PATH.

          $ path=$PATH:
          $ while [ $path ]; do echo " ${path%%:*} "; path=${path#*:}; done

       The command below will also loop through directories in your path.

          $IFS=:
          $ for dir in $PATH
          > do
          > ls -ld $dir
          > done
              drwxr-xr-x    2 root     root         4096 Jun 10 20:16 /usr/local/bin
              drwxr-xr-x    2 root     root         4096 Jun 13 23:12 /bin
              drwxr-xr-x    3 root     root        40960 Jun 12 08:00 /usr/bin
              drwxr-xr-x    2 root     root         4096 Feb 14 03:12 /usr/X11R6/bin
              drwxrwxr-x    2 chirico  chirico      4096 Jun  6 13:06 /home/chirico/bin

     Other ways of doing loops:

        for (( i=1; i <= 20; i++))
                do
                        echo -n "$i "
                done

     Note, to do it all on one line, do the following:

        $ for (( i=1; i <= 20; i++)); do echo -n "$i"; done

     Below, is an example of declaring i an integer so that you do not
     have to preface with let.

          $ declare -i i
          $ i=5;
          $ while (( $i > 1 )); do
          > i=i-1
          > echo $i
          > done
          4
          3
          2

     You can also use "while [ $i -gt 1 ]; do"  in place of "while (( $i > 1 )); do"

     To get a listing of all declared values

          $ declare -i


     Try putting a few words in the file "test"

         $ while read filename; do echo  "- $filename "; done < test |nl -w1

     Or, using an array

                declare -a Array
                Array[0]="zero"
                Array[1]="one"
                Array[2]="two"
                for i in `seq ${#Array[@]}`
                do
                  echo $Array[$i-1]
                done

         Also see (TIP 95 and TIP 133).



TIP 42:

     "diff" and "patch".

        You have created a program "prog.c", saved as this name and also copied
        to  "prog.c.old". You post "prog.c" to users.  Next, you make changes
        to prog.c

          $ diff -c prog.c.old prog.c > prog.patch

        Now, users can get the latest updates by running.

          $ patch < prog.patch

        By the way, you can make backups of your data easily.

          $ cp /etc/fstab{,.bak}

        Now, you do your edits to "/etc/fstab" and if you need
        to go back to the original, you can find it at
        "/etc/fstab.bak".



TIP 43:

     "cat" the Contents of Files Listed in a File, in That Order.

       SETUP (Assume you have the following)

              $ cat file_of_files
                  file1
                  file2

              $ cat file1
                  This is the data in file1

              $ cat file 2
                  This is the data in file2

       So there are 3 files here "file_of_files" which contains the name of
       other files.  In this case "file1" and "file2". And the contents of
       "file1" and "file2" is shown above.

               $ cat file_of_files|xargs cat
                    This is the data in  file1
                    This is the data in  file2




TIP 44:

     Columns and Rows -- getting anything you want.

     Assume you have the following file.

        $ cat data
           1 2 3
           4 5
           6 7 8 9 10
           11 12
           13 14

     How to you get everything in  2 columns?

        $ cat data|tr ' ' '\n'|xargs -l2
           1 2
           3 4
           5 6
           7 8
           9 10
           11 12
           13 14

    Three columns?

        $ cat data|tr ' ' '\n'|xargs -l3
           1 2 3
           4 5 6
           7 8 9
           10 11 12
           13 14

    What's the row sum of the "three columns?"

        $ cat data|tr ' ' '\n'|xargs -l3|tr ' ' '+'|bc
           6
           15
           24
           33
           27

    or

        $ tr ' ' '\n' < data |xargs -l3|tr ' ' '+'|bc

    NOTE "Steven Heiner's rule":

             cat one_file | program

           can always be rewritten as

             program < one_file

   Note: thanks to Steven Heiner (http://www.shelldorado.com/) the above can be
       shortened as follows:

               $ tr ' ' '\n' < data|xargs -l3|tr ' ' '+'|bc

          Need to "tr" from the stdin?

               $ tr "xy" "yx"| ... | ...

       But there is a the "Stephane CHAZELAS" condition here

         "Note that tr, sed, and awk mail fail on files containing '\0'
          sed and awk have unspecified behaviors if the input
          doesn't end in a '\n' (or to sum up, cat works for
          binary and text files, text utilities such as sed or awk
          work only for text files).



TIP 45:

     Auto Directory Spelling Corrections.

      To turn this on:

           $ shopt -s cdspell

      Now mispell a directory in the cd command.

           $ cd /usk/local
                   ^-------- still gets you to --
                                                |
                                            /usr/local

      What other options can you set? The following will list
      all the options:

           $ shopt -p



TIP 46:

     Record Eveything Printed on Your Terminal Screen.

            $ script -a <filename>

     Now start doing stuff and "everything" is appended to <filename>.
     For example

            $ script installation

            $ (command)

            $ (result)

            $ ...

            $ ...

            $ (command)

            $ (result)

            $ exit

     The whole session log is in the installation file that you can later
     read and/or cleanup and add to a documentation.

     This command can also be used to redirect the contents to another user,
     but you must be root to do this.

     Step 1 - find out what pts they are using.

            $ w

     Step 2 - Run script on that pts. After running this command below
              everything you type will appear on their screen.

            $ script /dev/pts/4


     Thanks to Jacques.GARNIER-EXTERIEUR@EU.RHODIA.COM for his contribution
     to this tip.

     Also reference TIP 208.



TIP 47:

     Monitor all Network Traffic Except Your Current ssh Connection.

           $ tcpdump -i eth0 -nN -vvv -xX -s 1500 port not 22

       Or to filter out port 123 as well getting the full length of the packet
       (-s 0), use the following:

           $ tcpdump -i eth0 -nN -vvv -xX -s 0 port not 22  and port not 123

       Or to filter only a certain host say 81.169.158.205

           $ tcpdump -i eth0 -nN -vvv -xX  port not 22 and host 81.169.158.205

     Just want ip addresses and a little bit of data, then,
     use this. The "-c 20" is to stop after 20 packets.

           $ tcpdump -i eth0 -nN  -s 1500 port not 22 -c 20

     If you're looking for sign of DOS attacks, the following show just the SYN
     packets on all interfaces:

           $ tcpdump 'tcp[13] & 2 == 2'



TIP 48:

     Where are the GNU Reference Manuals?

           http://www.gnu.org/manual/manual.html

     Also worth a look the "Linux Documentation Project"

           http://en.tldp.org/

     and Red Hat manuals

           http://www.redhat.com/docs/manuals/enterprise/



TIP 49:

     Setting or Changing the Library Path.

     The following contains the settings to be added or deleted

           /etc/ld.so.conf

     After this file is edited, you must run the following:

           $ ldconfig

     See "man ldconfig" for more information.



TIP 50:

     Working with Libraries in C

     Assume the following 3 programs:

      $ cat ./src/test.c

         int test(int t)
         {
           printf("%d\n",t);
           return t;
         }


      $ cat ./src/prog1.c

         /*
          program: prog1.c
          dependences: test.c

          compiling this program:
          gcc -o prog test.c prog1.c

          Note the libpersonal include
          should be remove if NOT using the
          library
         */

         #include <libpersonal.h>
         #include <stdio.h>
         int
         main(int argc, char **argv)
         {
           test(45);
         }

      $ cat ./include/libpersonal.h

         extern int test(int);


     Prog1.c needs the test function in  test.c
     To compile, so that both programs work together, do the following:

          $ cd src
          $ gcc -o prog test.c prog1.c -I../include

     However, if you want to create your own static library, then, run the following:

          $ mkdir -p ../lib
          $ gcc -c test.c  -o ../lib/test.o
          $ cd ../lib
          $ ar r libpersonal.a test.o
          $ ranlib libpersonal.a

     or, the ar and ranlib command can be combined as follows:

          $ ar rs libpersonal.a test.o

     To compile the program with the static library:

          $ cd ../src
          $ gcc -I../include -L../lib -o prog1 prog1.c -lpersonal


     The -I../include  tells  gcc to look in the ../include directory for
     libpersonal.h. and -L../lib, tells gcc to look for the
     "libpersonal.a" library.

           $ cd ..
           $ tree src lib include
           src
           |-- prog
           |-- prog1
           |-- prog1.c
           `-- test.c
           lib
           |-- libpersonal.a
           `-- test.o
           include
           `-- libpersonal.h

     This was a STATIC library. Often times you will want to use a SHARED
     or dynamic library.

     SHARED LIBRARY:

     You must recompile test.c with -fpic option.

          $ cd ../lib
          $ gcc -c -fpic ../src/test.c -o test.o

     Next create the libpersonal.so file.

          $ gcc -shared -o libpersonal.so test.o

     Now, compile the source prog1.c as follows:

          $ cd ../src
          $ gcc -Wl,-R../lib -L../lib -I../include -o prog2 prog1.c -lpersonal

     This should work fine. But, take a look at prog2 using the ldd command.

          $ ldd prog2

        libpersonal.so => ../lib/libpersonal.so (0x40017000)
        libc.so.6 => /lib/tls/libc.so.6 (0x42000000)
        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)

     If you move the program prog2 to a different location, it will not run.
     Instead you will get the following error:

           prog2: error while loading shared libraries: libpersonal.so:
                     cannot open shared object file: No such file or directory

     To fix this, you should specify the direct path to the library. And in my
     case it is rather long

      $  gcc -Wl,-R/work/souptonuts/documentation/theBook/lib -L../lib -I../include -o prog2 prog1.c -lpersonal

     SPECIAL NOTE: The -R must always follow the -Wl.  (-Wl,-R<directory>) They always go together



TIP 51:

     Actively Monitor a File and Send Email when Expression Occurs.

     This is a way to monitor "/var/log/messages" or any file for certain changes.
     The example below actively monitors "stuff" for the work "now" and as soon as
     "now" is added to the file, the contents of msg are sent to the user
     mikechirico@hotmail.com

          $ tail -f stuff | \
              awk ' /now/ { system("mail -s \"This is working\"  mikechirico@hotmail.com < msg") }'

     Or, you can run a program, say get headings on slashdot from the program "getslash.php" which
     runs on  "192.168.1.155" with account "chirico". Assuming you have ssh keys setup, then, the following
     will send mail from the output:

          $ ssh chirico@192.168.1.155 "./bin/getslash.php"|mail -s "Slash cron Headlines"  mchirico@comcast.net

     See (TIP 80) for scraping the headings on slash dot and how to get a copy of "getslash.php".  If you still
     want to use awk:

           $ ssh chirico@192.168.1.155 "./bin/getslash.php"| \
                      awk '{ print $0 | "mail -s \x27 Slash Topics \x27 mchirico@comcast.net "}'

     Note the "\x27" is a quote.  Maybe you only want articles dealing with "Linux":

           $ ssh chirico@192.168.1.155 "./bin/getslash.php"| \
                      awk '/Linux/{ print $0 | "mail -s \x27 Slash Topics \x27 mchirico@comcast.net "}'

     For $60, you can get a numeric display from "delcom engineering" that you can send messages and
     data to.  I get weather information off the internet and send it to this device.

         http://sourceforge.net/projects/delcom/

     (Reference TIP 151 for ssh tips)



TIP 52:

     Need to Keep Secrets? Encrypt it.

      To Encrypt:

            $ openssl des3 -salt -in file.txt -out file.des3

      The above will prompt for a password, or you can put it in
      with a -k option, assuming you're on a trusted server.

      To Decrypt

            $  openssl des3 -d -salt -in file.des3 -out file.txt -k mypassword

      Need to encrypt what you type? Enter the following, then start typing
      and  ^D to end.

            $ openssl des3 -salt -out stuff.txt



TIP 53:

     Check that a File has Not Been Tampered With: Use Cryptographic Hashing Function.

     The md5sum is popular but dated

              $ md5sum file

     Instead, use one of the following;

              $ openssl dgst -sha1 -c file

              $ openssl dgst -ripemd160 -c  file

     All calls give a fixed length string or "message digest".



TIP 54:

     Need to View Information About a Secure Web Server? A SSL/TLS test.

           $ openssl s_client -connect www.sourceforge.net:443

     Above will give a long listing of certificates.

     Note, it is also possible to get certificate information about a mail server

           $ openssl s_client -connect mail.comcast.net:995 -showcerts

     When you do the above command you get two certificates. If you copy
     past both certificates by taking the following contents include the
     begin and end show below:

                 -----BEGIN CERTIFICATE-----
                 ....
                 -----END CERTIFICATE-----

     Then create files "comcast0.pem" and "comcast1.pem" out of these certificaties and
     put them in a directory "/home/donkey/.certs", then, with the openssl src package, in
     the "./tools/c_rehash" run

            $ c_rehash .certs
            Doing .certs
            comcast0.pem => 72f90dc0.0
            comcast1.pem => f73e89fd.0

     Now it's possible to have fetchmail work with these certs.

       #
       #
       # Sample .fetchmailrc file for Comcast
       #
       # Check mail every 90 seconds
       set daemon 90
       set syslog
       set postmaster donkey
       #set bouncemail
       #
       # Comcast email is zdonkey but computer account is  just donkey
       #
       poll mail.comcast.net with proto POP3 and options no dns
              user 'zdonkey' with pass "somethin35"  is 'donkey' here options ssl sslcertck sslcertpath '/home/donkey/.certs'
              smtphost comcast.net
       # currently not used
       mda '/usr/bin/procmail -d %T'


     REFERENCE: http://www.openssl.org/
                http://www.catb.org/~esr/fetchmail/fetchmail-6.2.5.tar.gz
                http://www.madboa.com/geek/openssl/



TIP 55:

     cp --parents. What does this option do?

     Assume you have the following directory structure

            .
            |-- a
            |   `-- b
            |       `-- c
            |           `-- d
            |               |-- file1
            |               `-- file2
            `-- newdir


     Issue the following command:

         $ cp --parents ./a/b/c/d/* ./newdir/

     Now you have the following:

            .
            |-- a
            |   `-- b
            |       `-- c
            |           `-- d
            |               |-- file1
            |               `-- file2
            `-- newdir
                `-- a
                    `-- b
                        `-- c
                            `-- d
                                |-- file1
                                `-- file2




TIP 56:

     Quickly Locating files.

     The "locate" command quickly searches the indexed database for files.  It just
     gives the name of the files; but, if you need more information use it as follows

         $ locate document|xargs ls -l

     The "locate" database may only get updated every 24 hours.  For more recent finds,
     use the "find" command.



TIP 57:

     Using the "find" Command.

     List only directories, max 2 nodes down that have "net" in the name

       $ find /proc -type d -maxdepth 2 -iname '*net*'

     Find all *.c and *.h files starting from the current "." position.

       $ find . \( -iname '*.c'  -o -iname '*.h' \) -print

     Find all, but skip what's in "/CVS" and "/junk". Start from "/work"


       $ find /work \( -iregex '.*/CVS'  -o -iregex '.*/junk' \)  -prune -o -print

     Note -regex and -iregex work on the directory as well, which means
     you must consider the "./" that comes before all listings.

     Here is another example. Find all files except what is under the CVS, including
     CVS listings. Also exclude "#" and "~".

       $ find . -regex '.*' ! \( -regex '.*CVS.*'  -o -regex '.*[#|~].*' \)

     Find a *.c file, then run grep on it looking for "stdio.h"

       $ find . -iname '*.c' -exec grep -H 'stdio.h' {} \;
         sample output -->  ./prog1.c:#include <stdio.h>
                            ./test.c:#include <stdio.h>

     Looking for the disk-hog on the whole system?

       $ find /  -size +10000k 2>/dev/null

     Looking for files changed in the last 24 hours? Make sure you add the
     minus sign "-1", otherwise, you will only find files changed exactly
     24 hours from now. With the "-1" you get files changed from now to 24
     hours.


       $ find  . -ctime -1  -printf "%a %f\n"
       Wed Oct  6 12:51:56 2004 .
       Wed Oct  6 12:35:16 2004 How_to_Linux_and_Open_Source.txt

     Or if you just want files.

       $ find . -type f -ctime -1  -printf "%a %f\n"

     Details on file status change in the last 48 hours, current directory. Also note "-atime -2").

       $ find . -ctime -2 -type f -exec ls -l {} \;

             NOTE: if you don't use -type f, you make get "." returned, which
             when run through ls "ls ." may list more than what you want.

             Also you may only want the current directory

       $ find . -ctime -2 -type f -maxdepth 1 -exec ls -l {} \;

     To find files modified within the last 5 to 10 minutes

       $ find . -mmin +5 -mmin -10 


     For more example "find" commands, reference the following looking
     for the latest version of "bashscripts.x.x.x.tar.gz":

         http://sourceforge.net/project/showfiles.php?group_id=79320&package_id=80711

     See "TIP 71" for examples of find using the inode feature. " $ find . -inum <inode> -exec rm -- '{}' \; "

     If you don't want error messages, or need to redirect error messages "> /dev/null 2>&1", or see
     "TIP 81".



TIP 58:

     Using the "rm" command.

     How do you remove a file that has the name "-".  For instance, if you run the command
     "$ cat > - " and type some text followed by ^d, how does the "-" file get deleted?

        $ rm -- -

     The "--" nullifies any rm options.

     How do you delete the directory "one", all it's sub-directories, and any data?

        $ rm -rf ./one

     Note, to selectively delete stuff on a directory, use the find command "TIP 57".
     To delete by inode, see "TIP 71".



TIP 59:

     Giving ownership.

     How do you give the user "donkey" ownership to all directories and files under
     "./fordonkey" ?

          $ chown -R donkey ./fordonkey



TIP 60:

     Only Permit root login -- give others a message when they try to login.

     Create the file "/etc/nologin" with "nologin" containing the contents
     of the message.



TIP 61:

     Limits: file size, open files, pipe size, stack size, max memory size
             cpu time, plus others.

     To get a listing of current limits:

          $ ulimit -a
             core file size        (blocks, -c) 0
             data seg size         (kbytes, -d) unlimited
             file size             (blocks, -f) unlimited
             max locked memory     (kbytes, -l) unlimited
             max memory size       (kbytes, -m) unlimited
             open files                    (-n) 1024
             pipe size          (512 bytes, -p) 8
             stack size            (kbytes, -s) 8192
             cpu time             (seconds, -t) unlimited
             max user processes            (-u) 8179
             virtual memory        (kbytes, -v) unlimited

     Note as a user you can decrease your limits in the current
     shell session; but, you cannot increase.  This can be ideal
     for testing programs.  But, first you may want to create
     another shell "sh" so that you can "go back to where started".

          $ ulimit -f 10

     Now try

          $ yes >> out
             File size limit exceeded

     To set limits on users, make changes to "/etc/security/limits.conf"

           bozo   - maxlogins 1

     Will keep bozo from loging in more than once.

     To list hard limits:

          $ ulimit -Ha

     To list soft limits:

          $ ulimit -Sa

     To restrict user access by time, day make changes to
             "/etc/security/time.conf"

     Also take a look at "/etc/profile" to see what other changes
     can be made, plus take a look under "/etc/security/*.conf" for
     other configuration files.



TIP 62:

     Stupid "cat" Tricks.

     Also see (TIP 43).

     If you have multiple blank lines, squeeze these lines down to one,
     then, try the following:

          $ cat -s <file>

     Want to number the lines?

          $ cat -n <file>

     Want to show tabs?

          $ cat -t <file>

     Need to mark end of lines by "$"? The following was suggested by  (Amos Shapira)

          $ cat -e <file>

     Want to see all the ctl characters?

          /* ctlgen.c
            Program to generate ctl characters.

            Compile:

               gcc -o ctlgen ctlgen.c

            Run:

               ./ctlgen > mout

            Now see the characters:

               cat -v mout

            Here's a sample output:


               $ cat -v mout|tail
                   test M-v
                   test M-w
                   test M-x
                   test M-y
                   test M-z
                   test M-{
                   test M-|
                   test M-}
                   test M-~
                   test M-^?

          */
          #include <stdlib.h>
          #include <stdio.h>
          int main()
          {
            int i;

            for(i=0; i < 256; ++i)
              printf("test %c \n",i);

            return 0;
          }



TIP 63:

     Guard against SYN attacks and "ping".

     As root do the following:

          echo 1 > /proc/sys/net/ipv4/tcp_syncookies

     Want to disable "ping" ?

          echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all

     Disable broadcast/multicast "ping" ?

          echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

     And to enable again:

          echo 0 > /proc/sys/net/ipv4/icmp_echo_ignore_all



TIP 64:

     Make changes to .bash_profile and need to update the current session?

       $ source .bash_profile

     With the above command, the user does not have to logout.



TIP 65:

     What are the Special Shell Variables?


        $#   The number of arguments.
        $@   All arguments, as separate words.
        $*   All arguments, as one word.
        $$   ID of the current process.
        $?   Exit status of the last command.
        $0,$1,..$9,${10},${11}...${N}    Positional parameters. After "9" you must use the ${k} syntax.

     Note that 0 is true. For example if you execute the following, which is true you get zero.

         $  [[ -f /etc/passwd ]]
         $  echo $?
         0
     And the following is false, which returns a 1.

         $  [[ -f /etc/passwdjabberwisnohere ]]
         $  echo $?
         1

     So true=0 and false=1.


     Sample program "mdo"  to show the difference between "$@" and "$*"

        #!/bin/bash
        function myarg
        {
            echo "$# in myarg function"
        }
        echo -e "$# parameters on the cmd line\n"
        echo -e "calling: myarg \"\$@\" and myarg \"\$*\"\n"
        myarg "$@"
        myarg "$*"
        echo -e "\ncalling: myarg \$@ and myarg \$* without quotes\n"
        myarg $@
        myarg $*


      The result of running "./mdo one two". Note that when quoted, myarg "$*",
      returns 1 ... all parameters are smushed together as one word.

            [chirico@third-fl-71 theBook]$ ./mdo one two
            2 parameters on the cmd line

            calling: myarg "$@" and myarg "$*"

            2 in myarg function
            1 in myarg function

            calling: myarg $@ and myarg $* without quotes

            2 in myarg function
            2 in myarg function

      Example program "mdo2" shows how the input separator can be changed.

        #!/bin/bash
        IFS=|
        echo -e "$*\n"
        IFS=,
        echo -e "$*\n"
        IFS=\;
        echo -e "$*\n"
        IFS=$1
        echo -e "$*\n"

            [chirico@third-fl-71 theBook]$ ./mdo2 one two three four five
            one two three four five

            one,two,three,four,five

            one;two;three;four;five

            oneotwoothreeofourofive



TIP 66:

     Replace all "x" with "y" and all "y" with "x" in file data.

        $ cata data
          x y
          y x

        $ tr "xy"  "yx" < data
          y x
          x y



TIP 67:

     On a Linux 2.6.x Kernel, how do you directly measure disk activity,
     and where is this information documented?

          o The information is documented in the kernel source
               ./Documentation/iostats.txt

          o The new way of getting this info in 2.6.x is
              $ cat /sys/block/hda/stat
            151121 5694 1932358 796675 37867 76770 916994 8353762 0 800672 9150437

             Field  1 -- # of reads issued
                 This is the total number of reads completed successfully.
             Field  2 -- # of reads merged, field 6 -- # of writes merged
                 Reads and writes which are adjacent to each other may be merged for
                 efficiency.  Thus two 4K reads may become one 8K read before it is
                 ultimately handed to the disk, and so it will be counted (and queued)
                 as only one I/O.  This field lets you know how often this was done.
             Field  3 -- # of sectors read
                 This is the total number of sectors read successfully.
             Field  4 -- # of milliseconds spent reading
                 This is the total number of milliseconds spent by all reads (as
                 measured from __make_request() to end_that_request_last()).
             Field  5 -- # of writes completed
                 This is the total number of writes completed successfully.
             Field  7 -- # of sectors written
                 This is the total number of sectors written successfully.
             Field  8 -- # of milliseconds spent writing
                 This is the total number of milliseconds spent by all writes (as
                 measured from __make_request() to end_that_request_last()).
             Field  9 -- # of I/Os currently in progress
                 The only field that should go to zero. Incremented as requests are
                 given to appropriate request_queue_t and decremented as they finish.
             Field 10 -- # of milliseconds spent doing I/Os
                 This field is increases so long as field 9 is nonzero.
             Field 11 -- weighted # of milliseconds spent doing I/Os
                 This field is incremented at each I/O start, I/O completion, I/O
                 merge, or read of these stats by the number of I/Os in progress
                 (field 9) times the number of milliseconds spent doing I/O since the
                 last update of this field.  This can provide an easy measure of both
                 I/O completion time and the backlog that may be accumulating.

       Note, this is device specific.



TIP 68:

     Passing Outbound Mail, plus Masquerading User and Hostname.

     Here's a specific example:

         How does one send and receive Comcast email from a home Linux box,
         which uses Comcast as the ISP, if the local account on the Linux
         box is different from the Comcast email.  For instance, the
         account on the Linux box is "chirico@third-fl-71" and the Comcast
         email account is "mchirico@comcast.net".  Note both the hostname and
         username are different.

         So, the user "chirico" using "mutt", "elm" or any email program would
         like to send out email to say "donkey@comcast.net"; yet, donkey would
         see the email from "mchirico@comcast.net" and not "chirico@third-fl-71"
         but chirico@third-fl-71 would get the replies.

         For a full description of how to solve this problem, including related
         "sendmail.mc", "site.config.m4", "genericstable", "genericsdomain",
         ".procmailrc", and ".forward" files,  reference the following:

           http://prdownloads.sourceforge.net/souptonuts/README_COMCAST_EMAIL.txt?download

         Included in the above link are instructions for building sendmail with
         "SASL" and "STARTTLS".



TIP 69:

     How do you remove just the last 2 lines from a file and save the result?

         $ sed  '$d' file | sed '$d' > savefile

     Or, as Amos Shapira pointed out, it's much easier with the head command.

         $ head -2 file

      And, of course, removing just the last line

         $ sed '$d' file > savefile

         (See REFERENCES (13))

     How do you remove extra spaces at the end of a line?

         $ sed 's/[ ]*$//g'

     How do you remove blank lines, or lines with just spaces and tabs,
     saving the origional file as file.backup?

         $ perl -pi.backup -e "s/^(\s)*\n//"  file




TIP 70:

     Generating Random Numbers.

         $ od -vAn -N4 -tu4 < /dev/urandom
             3905158199



TIP 71:

     Deleting a File by it's Inode Value.

       See (PROGRAMMING TIP 5) for creating the file, or

       $ cat > '\n\n\n\n\n\n\n'
         type some text
         ^D

     To list the inode and display the characters.

       $ ls -libt *

     To remove by inode. Note the "--" option.  This
     will keep any special characters in the file from being
     interpreted at "rm" options.

       $ find . -inum <inode> -exec rm -- '{}' \;

     Or to check contents

       $ find . -inum <inode> -exec cat '{}' \;

     Reference:
         http://www.faqs.org/ftp/usenet/news.answers/unix-faq/faq/part2



TIP 72:

     Sending Attachments Using Mutt -- On the Command Line.

        $ mutt -s "See Attachment" -a file.doc user@domain.net < message.txt

          or just the message:

        $ echo | mutt -a sample.tar.gz user@domain.net

      Reference:
          http://www.shelldorado.com/articles/mailattachments.html

        Also see (TIP 51).



TIP 73:

     Want to find out what functions a program calls?

         $ strace <program>

     Try this with "topen.c" (see PROGRAMMING TIP 5)

         $ strace  ./topen



TIP 74:

     RPM Usage Summary.

     Install. Full filename is needed.

         $ rpm -ivh Fedora/RPMS/postgresql-libs-7.4.2-1.i386.rpm

     To view list of files installed with a particular package.

         $ rpm -ql postgresql-libs
                /usr/lib/libecpg.so.4
                /usr/lib/libecpg.so.4.1
                /usr/lib/libecpg_compat.so.1
                /usr/lib/libecpg_compat.so.1.1
                /usr/lib/libpgtypes.so.1
                ...

     Or, to get the file listing from a package that is not installed use the
     "-p" option.

         $ rpm -pql /iso0/Fedora/RPMS/libpcap-0.8.3-7.i386.rpm
               /usr/share/doc/libpcap-0.8.3/CHANGES
               /usr/share/doc/libpcap-0.8.3/LICENSE
               /usr/share/doc/libpcap-0.8.3/README
               /usr/share/man/man3/pcap.3.gz

     For dependencies listing, use the "R" option.

         $ rpm -qpR /iso0/Fedora/RPMS/libpcap-0.8.3-7.i386.rpm
               /sbin/ldconfig
               /sbin/ldconfig
               kernel >= 2.2.0
               libc.so.6
               libc.so.6(GLIBC_2.0)
               libc.so.6(GLIBC_2.1)
               libc.so.6(GLIBC_2.1.3)
               libc.so.6(GLIBC_2.3)
               openssl
               rpmlib(CompressedFileNames) <= 3.0.4-1
               rpmlib(PayloadFilesHavePrefix) <= 4.0-1

     To check the integrity, use the "-K" option.

         $ rpm -K /iso0/Fedora/RPMS/libpcap-0.8.3-7.i386.rpm
               /iso0/Fedora/RPMS/libpcap-0.8.3-7.i386.rpm: (sha1) dsa sha1 md5 gpg OK

     To list all packages installed.

         $ rpm -qa

     To find out which file a package belongs to.

         $ rpm -qf /usr/lib/libecpg.so.4.1

     To uninstall a package

         $ rpm -e

     For building rpm packages reference the following:
       http://www-106.ibm.com/developerworks/library/l-rpm1/

     To verify md5 sum so that you know it downloaded ok

         $ rpm -K  *.rpm

     The following is a good reference:
        http://www.rpm.org/max-rpm/s1-rpm-install-additional-options.html



TIP 75:

     Listing Output from a Bash Script.

     Add "set -x"

          #!/bin/bash
          set -x
          ls
          date

     Will list the files and output as follows:

           + ls
           ChangeLog  CVS  data  test
           + date
           Thu Jul  1 20:41:04 EDT 2004



TIP 76:

     Using wget.

     Grap a webpage and pipe it to less. For example suppose you wanted to pipe the
     contents of all these tips, directly from the web.

      $ wget -O - http://sourceforge.net/direct-dl/mchirico/souptonuts/How_to_Linux_and_Open_Source.txt|less



TIP 77:

     Finding IP address and MAC address.

       $ /sbin/ifconfig

     Note the following output "eth0" and "eth0:1" which means
     two IP addresses are tied to 1 NIC (Network Interface Card).

             eth0      Link encap:Ethernet  HWaddr 00:50:DA:60:5B:AD
                       inet addr:192.168.1.155  Bcast:192.168.99.255  Mask:255.255.252.0
                       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                       RX packets:982757 errors:116 dropped:0 overruns:0 frame:116
                       TX packets:439297 errors:0 dropped:0 overruns:0 carrier:0
                       collisions:0 txqueuelen:1000
                       RX bytes:693529078 (661.4 Mb)  TX bytes:78400296 (74.7 Mb)
                       Interrupt:10 Base address:0xa800

             eth0:1    Link encap:Ethernet  HWaddr 00:50:DA:60:5B:AD
                       inet addr:192.168.1.182  Bcast:192.168.3.255  Mask:255.255.252.0
                       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                       RX packets:982757 errors:116 dropped:0 overruns:0 frame:116
                       TX packets:439299 errors:0 dropped:0 overruns:0 carrier:0
                       collisions:0 txqueuelen:1000
                       RX bytes:693529078 (661.4 Mb)  TX bytes:78400636 (74.7 Mb)
                       Interrupt:10 Base address:0xa800

             lo        Link encap:Local Loopback
                       inet addr:127.0.0.1  Mask:255.0.0.0
                       UP LOOPBACK RUNNING  MTU:16436  Metric:1
                       RX packets:785 errors:0 dropped:0 overruns:0 frame:0
                       TX packets:785 errors:0 dropped:0 overruns:0 carrier:0
                       collisions:0 txqueuelen:0
                       RX bytes:2372833 (2.2 Mb)  TX bytes:2372833 (2.2 Mb)



TIP 78:

     DOS to UNIX and UNIX to DOS.

        $ dos2unix file.txt

     And to go the other way from UNIX to DOS

        $ unix2dos unixfile

     See the man page, since there are MAC options.


     NOTE: If you're working file DOS files, you'll probably want to use
           "zip" instead of "gzip" so users on Windows can unzip them.

              $ zip test.zip test.txt



TIP 79:

     Need to Run Interactive Commands? Try "expect".
       http://expect.nist.gov/expect.tar.gz

     This simple example waits for the input "hi", in some form before
     returning, immediately, "hello there!". Otherwise, it will wait for
     60 seconds, then, return "hello there!".

          #!/usr/bin/expect
          set timeout 60
          expect "hi\n"
          send "hello there!\n"


     Reference:
        http://www.oreilly.com/catalog/expect/chapter/ch03.html

        http://www.cotse.com/dlf/man/expect/bulletproof1.htm



TIP 80:

     Using PHP as a Command Line Scripting Language.

     The following will grab the complete file from slashdot.

         #!/usr/bin/php -q

         <?php
         $fileName = "http://slashdot.org/slashdot.xml";
         $rss = file($fileName) or die ("Cannot open file $fileName\n");
         for ($index=0; $index < count($rss); $index++)
              {
              echo $rss[$index];
              }
         ?>

       Note, if you want an example that parses the XML of
       slashdot, then, download the following:

           http://prdownloads.sourceforge.net/souptonuts/php_scripts.tar.gz?download



TIP 81:

     Discarding all output -- including stderr messages.

         $ ls  > /dev/null 2>&1

     Or sending all output to a file

         $ someprog > /tmp/file 2>&1

     Sometimes, find displays a lot of errors when searching through
     directories that the user doesn't have access to. To discard
     error messages "stderr", which is normally file descripter "2"
     work the following:

         $ find / -iname 'stuff' 2>/dev/null

          or to pipe results elsewhere

         $ find / -iname 'stuff' > /tmp/results_of_find  2>/dev/null

     Also see (TIP 118).



TIP 82:

     Using MIX.  D. Knuth's  assembly language/machine-code instruction set used in
     his books to illustrate his algorithms.

     Download the source:

       http://sourceforge.net/project/showfiles.php?group_id=13897

       $ ./configure
       $ make
       $ make install

     Documentation can be found at the following link. The link on
     sourceforge is not correct, but, the one below works.

       http://www.gnu.org/software/mdk/manual/



TIP 83:

     Gnuplot [ http://sourceforge.net/projects/gnuplot/ ].

     This software is ideal for printing graphs.

         gnuplot> set term png
         gnuplot> set output 'testcos.png'
         gnuplot> plot cos(x)*sin(x)
         gnuplot> exit

     Or the following command can be put into "file"

            $ cat > file
            set term png
            set output 'testcos.png'
            plot cos(x)*sin(x)
            exit
            ^D

     Then, run as follows:

            $ gnuplot file

     Or, suppose you have the following file "/home/chirico/data". Comments
     with "#" are not read by gnuplot.

            # File /home/chirico/data
            #
            2005-07-26  1    2.3    3
            2005-07-27  2    3.4    5
            2005-07-28  3    4    6.6
            2005-07-29  4    6    2.5

     And you have the following new "file"

            set term png
            set xdata time
            set timefmt "%Y-%m-%d "
            set format x "%Y/%m/%d"
            set output '/var/www/html/chirico/gnuplot/data.png'
            plot '/home/chirico/data' using 1:2 w linespoints  title '1st col', \
             '/home/chirico/data' using 1:3 w linespoints  title '2nd col', \
             '/home/chirico/data' using 1:4 w linespoints  title '3rd col'
            exit

     You can now get a graph of this data running the following:

            $ gnuplot file



TIP 84:

     CPU Information - speed, processor, cache.

            $ cat /proc/cpuinfo

               processor       : 0
               vendor_id       : GenuineIntel
               cpu family      : 15
               model           : 2
               model name      : Intel(R) Pentium(R) 4 CPU 2.20GHz
               stepping        : 9
               cpu MHz         : 2193.221
               cache size      : 512 KB
               fdiv_bug        : no
               hlt_bug         : no
               f00f_bug        : no
               coma_bug        : no
               fpu             : yes
               fpu_exception   : yes
               cpuid level     : 2
               wp              : yes
               flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
               bogomips        : 4325.37

      "bogomips" is a rough but good way to quickly compare two computer speeds. True it's a
      bogus reading; but, a "good enough" for government work calculation.  See (TIP 10) for
      "vmstat" and "iostat".



TIP 85:

     POVRAY - Making Animated GIFs

     To see this in action, reference:
      http://souptonuts.sourceforge.net/povray/orbit.pov.html

     These are the basic command to create:


        $ povray orbit.ini -Iorbit.pov
        $ convert -delay 20 *.ppm orbit.gif

     By the way, convert is a program from imagemagick, and it can
     be downloaded from ( http://www.imagemagick.org ).

    The following is "orbit.pov"


          #include "colors.inc"
          #include "finish.inc"
          #include "metals.inc"
          #include "textures.inc"
          #include "stones.inc"
          #include "skies.inc"

          camera {
            location < 2, 3, -8 >
            look_at  < 0, 0, 0 >
            focal_point <0, 0, 0>
            blur_samples 20
          }

          light_source {
                  < 0, 10, 0>
                  color White
                  area_light <2,0,0>,<0,0,2>, 2, 2
                  adaptive 1
                  fade_distance 8
                  fade_power 1
                  }

          sky_sphere {
            S_Cloud3
          }

          plane { <0, 1, 0>, -1
                  texture {
                          pigment {
                                  checker color Blue, color White
                          }
                          finish {Phong_Glossy}
                  }
          }
          #declare ball0=
                  sphere {
                  <0.5, 0.5, 0>, 1
                  texture {
                  T_Silver_1E
                  pigment {Yellow}
                          }
                  }

          #declare ball1=
                  sphere {
                  <3, 2, 0>, 0.5
                  texture {
                  T_Silver_1E
                  pigment {Blue}
                          }
                  }

          #declare ball2=
                  sphere {
                  <3, 1, 0>, 1
                  texture {
                  T_Silver_1E
                  pigment {Green}
                          }
                  }

          object {ball0 rotate 360*clock*y}
          object {ball1 rotate 720*clock*y}
          object {ball2 rotate 360*(1 - clock)*y}


    And, "orbit.ini" follows:

          Output_File_Type=P

          Width=320
          Height=240

          Initial_Frame=1
          Final_Frame=10
          Antialias=true

          Subset_Start_Frame=1
          Subset_End_Frame=10

          Cyclic_Animation=on



TIP 86:

     GPG --  GnuPG

        Reference: http://www.gnupg.org/documentation/faqs.html
                   http://codesorcery.net/mutt/mutt-gnupg-howto
                   http://www.gnupg.org/(en)/download/index.html
                   (SCRIPT 4) on following link:
                   http://prdownloads.sourceforge.net/souptonuts/README_common_script_commands.html?download


     Generage key:

        $ gpg --gen-key

     Generate public key ID and fingerprint

        $ gpg --fingerprint

     Get a list of keys:

        $ gpg --list-keys

          pub  1024D/A11C1499 2004-07-15 Mike Chirico <mchirico@comcast.net>
          sub  1024g/E1A3C2B3 2004-07-15

     Encrypt

        $ gpg -r Mike  --encrypt sample.txt

       This will produce "sample.txt.asc", which is a binary file.  Note, I can use "Mike" because that's the
       name on the list of keys. Again, it will be a binary file.

     Encrypt using "ASCII-armored text"  (--armor), which is probably what you want when sending "in" the body of an
     email, or some document.

        $ gpg  -r Mike  --encrypt --armor sample.txt
            or
        $ gpg -r Mike -e -a sample.txt
            or
        $ gpg --output somefile.asc --armor -r Mike  --encrypt --armor sample.txt

     The above 3 statements will still produce "sample.txt.asc", but look at it, or "$ cat sample.txt.asc" without 
     fear, since there are no binary characters. Yes, you could even compile a program "$ g++ -o test test.c" , then,
     "$ gpg --output test.asc  -r Mike --encrypt --armor test". However, when decrypting make sure to pipe
     the results.

            $ gpg --decrypt test.asc > test

     Export "public" key:

           $ gpg --armor --export Mike > m1.asc

     Signing the file "message.txt":

           $ gpg --clearsign message.txt


     Sending the key to the "key-server"

        First, list the keys.

                $ gpg --list-keys
                    /home/chirico/.gnupg/pubring.gpg
                                 v------------------ Use this with "0x" in front -------
                  pub  1024D/A11C1499 2004-07-15 Mike Chirico  <mchirico@comcast.net>   |
                  sub  1024g/E1A3C2B3 2004-07-15                                        |
                                                                                        |
                                   v----------------------------------------------------
                $ gpg --send-keys 0xA11C1499

             The above sends it to the keyserver defined in "/home/chirico/.gnupg/gpg.conf".  Other key servers:

                            wwwkeys.pgp.net
                            search.keyserver.net
                            pgp.ai.mit.edu

             When you go to your user-group meetings, you need to bring 2 forms of ID, and
             list your Key fingerprint. Shown below is the command for getting this fingerprint.

                $ gpg --fingerprint mchirico@comcast.net
                 pub   1024D/A11C1499 2004-07-15
                 Key fingerprint = 9D7F C80D BB7B 4BAB CCA4  1BE9 9056 5BEC A11C 1499
                 uid   Mike Chirico (http://souptonuts.sourceforge.net/chirico/index.php) <mchirico@comcast.net>
                 sub   1024g/E1A3C2B3 2004-07-15


     Receving keys:

        The following will retrieve my mchirico@comcast.net key

               $ gpg --recv-keys 0xA11C1499


     Special Note: If you get the following error "GPG: Warning: Using Insecure Memory" , then,
                   " chmod 4755 /path/to/gpg"  to setuid(root) permissioins on the gpg binary.


     NOTE: If using mutt, just before sending with the "y" option, hit "p" to sign or encrypt.

     It's possible to create a gpg/pgp email from the command line. For a tutorial on this,
     reference (SCRIPT 4) at the following link:
           http://prdownloads.sourceforge.net/souptonuts/README_common_script_commands.html?download



TIP 87:

     Working with Dates: Steffen Beyer has developed a Perl and C module for working with dates

     This softare can be downloaded from the following location:
        http://www.engelschall.com/u/sb/download/pkg/Date-Calc-5.3.tar.gz

         $ wget http://www.engelschall.com/u/sb/download/pkg/Date-Calc-5.3.tar.gz
         $ tar -xzvf Date-Calc-5.3.tar.gz
         $ cd Date-Calc-5.3
         $ cp ./examples/cal.c .
         $ gcc cal.c DateCalc.c -o mcal

     The file cal.c contains sample function calls from DateCalc.c.  Note, "DateCalc.c"
     is just a list of functions and includes for "DateCalc.h" and "ToolBox.h".

     Or, and this may be easier, just download the following:
         http://prdownloads.sourceforge.net/cpearls/date_calc.tar.gz?download

     The above link contains a few examples.



TIP 88:

     Color patterns for mutt.

     The colors can be changed in the /home/user/.muttrc file. The first field begins with
     color, the second field is the foreground color, and the third field is the background
     color, or default.

     An example .muttrc for colors:

       # color patterns for mutt
       color normal     white          black # normal text
       color indicator  black          yellow  # actual message
       color tree       brightmagenta  default # thread arrows
       color status     brightyellow         default # status line
       color error      brightred      default # errors
       color message    magenta        default # info messages
       color signature  magenta        default # signature
       color attachment brightyellow   red     # MIME attachments
       color search     brightyellow   red     # search matches
       color tilde      brightmagenta  default # ~ at bottom of msg
       color markers    red            default # + at beginning of wrapped lines
       color hdrdefault cyan           default # default header lines
       color bold       red            default # hiliting bold patterns in body
       color underline  green          default # hiliting underlined patterns in body
       color quoted     cyan           default # quoted text
       color quoted1    magenta        default
       color quoted2    red            default
       color quoted3    green          default
       color quoted4    magenta           default
       color quoted5    cyan           default
       color quoted6    magenta        default
       color quoted7    red            default
       color quoted8    green          default
       color quoted9    cyan           default
       color body   cyan  default  "((ftp|http|https)://|news:)[^ >)\"\t]+"
       color body   cyan  default  "[-a-z_0-9.+]+@[-a-z_0-9.]+"
       color body   red   default  "(^| )\\*[-a-z0-9*]+\\*[,.?]?[ \n]"
       color body   green default  "(^| )_[-a-z0-9_]+_[,.?]?[\n]"
       color body   red   default  "(^| )\\*[-a-z0-9*]+\\*[,.?]?[ \n]"
       color body   green default  "(^| )_[-a-z0-9_]+_[,.?]?[ \n]"
       color index  cyan  default  ~F         # Flagged
       color index  red   default  ~N         # New
       color index  magenta    default  ~T         # Tagged
       color index  cyan       default  ~D         # Deleted


     Also see (TIP 190)



TIP 89:

     ps command in detail


     Here are the possible codes when using state "$ ps -e -o state,cmd"


             PROCESS STATE CODES
                  D   uninterruptible sleep (usually IO)
                  R   runnable (on run queue)
                  S   sleeping
                  T   traced or stopped
                  Z   a defunct ("zombie") process

                  <    high-priority (not nice to other users)
                  N    low-priority (nice to other users)
                  L    has pages locked into memory (for real-time and custom IO)
                  s    is a session leader
                  l    is multi-threaded (using CLONE_THREAD, like NPTL pthreads do)
                  +    is in the foreground process group

    For instance:

     Note that the -o is for user defined, and -e is for select
     all process.

       $ ps -e -o pid,state,start,time,etime,cmd

          ...
             9946 S 15:40:45 00:00:00    02:23:29 /bin/bash -i
             9985 T 15:41:24 00:00:01    02:22:50 emacs mout2
            10003 T 15:43:59 00:00:00    02:20:15 emacs NOTES
            10320 T 17:38:42 00:00:00       25:32 emacs stuff.c
         ...

     You may want to command below, without the -e, which will give the
     process only under the current terminal.

       $ ps -o pid,state,start,time,etime,cmd

     Want to find what 's impacting your load?

       $ ps -e -o %cpu,pid,state,start,time,etime,%cpu,%mem,cmd|sort -rn|less



       $ ps aux

            USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
            root         1  0.0  0.0  1380  480 ?        S    Aug04   0:00 init [3]
            root         2  0.0  0.0     0    0 ?        SWN  Aug04   0:00 [ksoftirqd/0]
            root         3  0.0  0.0     0    0 ?        SW<  Aug04   0:00 [events/0]
            root         4  0.0  0.0     0    0 ?        SW<  Aug04   0:00 [khelper]
          ...

     Or, if you want to see the environment add the -e option

       $ ps aeux

          ...
            chirico   2735  0.0  0.1  4400 1492 pts/0    S    Aug04   0:00 -bash USER=chirico LOGNAME=chirico HOME=/home/chirico PATH=/usr/
            chirico   2771  0.0  0.0  4328  924 pts/0    S    Aug04   0:00 screen -e^Pa -D -R HOSTNAME=third-fl-71.localdomain TERM=xterm S
            chirico   2772  0.0  0.6  9476 6352 ?        S    Aug04   0:54 SCREEN -e^Pa -D -R HOSTNAME=third-fl-71.localdomain TERM=xterm S
            chirico   2773  0.0  0.1  4432 1548 pts/1    S    Aug04   0:10 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
            chirico   2797  0.0  0.1  4416 1496 pts/2    S    Aug04   0:00 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
            root      2821  0.0  0.0  4100  952 pts/2    S    Aug04   0:00 su -
            root      2822  0.0  0.1  4384 1480 pts/2    S    Aug04   0:00 -bash
            chirico   2862  0.0  0.1  4428 1524 pts/3    S    Aug04   0:00 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
            sporkey   2946  0.0  0.2  6836 2960 ?        S    Aug04   0:15 fetchmail
            chirico   2952  0.0  0.1  4436 1552 pts/5    S    Aug04   0:00 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
            chirico   3880  0.0  0.1  4416 1496 pts/6    S    Aug05   0:00 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
            root      3904  0.0  0.0  4100  956 pts/6    S    Aug05   0:00 su - donkey
            donkey    3905  0.0  0.1  4336 1452 pts/6    S    Aug05   0:00 -bash
            donkey    3938  0.0  0.2  6732 2856 ?        S    Aug05   0:14 fetchmail
            chirico   3944  0.0  0.1  4416 1496 pts/7    S    Aug05   0:00 /bin/bash STY=2772.pts-0.third-fl-71 TERM=screen TERMCAP=SC|scre
          ...

     There is also a -f "forrest" option. Also note below " -bash" is the start of a login shell.

      $ ps aeuxwwf 
     
     The ww option above gives a wide format with all variables. Use the above command if you plan
     to parse through a Perl script. Otherwise, it may be easier to do a quick read using the command
     below, without "ww".    

      $ ps aeuxf

          ...
            root      2339  0.0  0.1  3512 1444 ?        S    Dec01   0:00 /usr/sbin/sshd
            root     25651  0.0  0.1  6764 1980 ?        S    Dec23   0:00  \_ /usr/sbin/sshd
            chirico  25653  0.0  0.2  6840 2236 ?        S    Dec23   0:14      \_ /usr/sbin/sshd
            chirico  25654  0.0  0.1  4364 1440 pts/4    S    Dec23   0:00          \_ -bash USER=chirico LOGNAME=chirico HOME=/home/chirico
            chirico  25690  0.0  0.0  4328  920 pts/4    S    Dec23   0:00              \_ screen -e^Pa -D -R HOSTNAME=third-fl-71.localdomain TERM=xterm
            root      2355  0.0  0.0  2068  904 ?        S    Dec01   0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid
          ...

     It is also possible to list the process by command line. For example, the following command will only list the emacs
     processes.

      $ ps -fC emacs
       UID        PID  PPID  C STIME TTY          TIME CMD
       chirico   5049  5020  0 May11 pts/13   00:00:00 emacs -nw Notes
       chirico  12368  5104  0 May12 pts/18   00:00:00 emacs -nw dnotify.c
       chirico  19792 18028  0 May13 pts/20   00:00:00 emacs -nw hello.c
       chirico  14034 27367  0 18:52 pts/8    00:00:00 emacs -nw How_to_Linux_and_Open_Source.txt

     You may also want to consider using top in batch mode. Here the "-n 1" means refresh once,
     and the "b" is for batch. The "fmt -s" is to put it in a more readable format.

       $ top -n 1 b |fmt  -s >>statfile




TIP 90:

     Learning Assembly.

     Once you have written the source, assuming the file is "exit.s", it can be compiled as follows:

            $ as exit.s -o exit.o
            $ ld exit.o -o exit


     Here is the program:

         #
         #INPUT:  none
         #
         #OUTPUT:         returns a status code. This can be viewed
         # by typing
         #
         # echo $?
         #
         # after running the program
         #
         #VARIABLES:
         # %eax holds the system call number
         # (this is always the case)
         #
         # %ebx holds the return status
         #
                 .section .data
                 .section .text

                 .globl _start
         _start:
                 movl $1, %eax # this is the linux kernel command
                 # number (system call) for exiting
                 # a program
                 movl $0, %ebx # this is the status number we will
                 # return to the operating system.
                 # Change this around and it will
                 # return different things to
                 # echo $?
                 int $0x80 # this wakes up the kernel to run
                 # the exit command

     After running this program, you can get the exit code.

            $ exit $?
            0

     That is about all it does; but, get the book for more details. The
     book is free.

          http://savannah.nongnu.org/download/pgubook/



TIP 91:

     Creating a sandbox for reiserfstune,debugreiserfs and ACL.  Also see TIP 4.

     Assume you have a reisers files system created from a disk file, which
     means you have done something like the following:

          # dd if=/dev/zero of=disk-rfs count=102400
          # losetup  /dev/loop4 ./disk-rfs
          # mkfs -t reiserfs /dev/loop4
          # mkdir /fs2
          # mount -o loop,acl ./disk-rfs /fs2

     Now, you can run reiserfstune. But, first you will need to umount fs2

          # umount /fs2
          # reiserfstune ./disk-rfs

     Or you can run the debug command

          # debugreiserfs -J ./disk-rfs

     Now, suppose you run through a lot of the debug options on
     http://www.namesys.com/ and you destroy this file.

     You can recreate the file and delete the loop device.

          # dd if=/dev/zero of=disk-rfs count=102400
          # losetup -d /dev/loop4
          # mount -o loop,acl ./disk-rfs /fs2

     Now, try working with some of the ACL options - you can only do this
     with the latest kernel and tools -- Fedora Core 2 will work.

     Assume you have 3 users, donkey, chirico and bozo2. You can give
     everyone rights to this file system as follows:

          # setfacl -R -m d:u:donkey:rwx,d:u:chirico:rwx,d:u:bozo2:rwx /fs2



TIP 92:

     SpamAssassin - Setup.

     Step 1.

           Installing the SpamAssassin CPAN utility. You will need to do this
           as root.
        
              $ su -

           Once you have root privileges invoke cpan.
        
              # perl -MCPAN -e shell

              cpan>

           Now install with prerequisites policy set to ask.
        
              cpan> o conf prerequisites_policy ask
        
              cpan> install Mail::SpamAssassin
        
           You will get lots of output as the necessary modules are downloaded and
           compiled and installed.

     Step 2.

            Configuration.

            Edit the following "/etc/mail/spamassassin/local.cf"

            Here is a look at my file

                $ cat /etc/mail/spamassassin/local.cf


                # This is the right place to customize your installation of SpamAssassin.
                #
                # See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
                # tweaked.
                #
                ###########################################################################
                #
                # rewrite_subject 0
                # report_safe 1
                # trusted_networks 212.17.35.
                #
                
                # Below added from book
                # You may want to set this to 5, then, work your way down.
                # Currently I have this 3
                required_hits 3
                
                # This determines how spam is reported. Currently safe email is reported
                # in the message.
                report_safe 1
                
                # The will rewrite the tag of the spam message.
                rewrite_subject 1
                
                # By default, SpamAssassin will run RBL checks.  If your ISP already
                # does this, set this to 1.
                skip_rbl_checks 0

     Step 3.

            Update .procmail.

            You should update the .procmail file as follows. Here is my /home/chirico/.procmail file.


                $ cat /home/chirico/.procmailrc

                PATH=/bin:/usr/bin:/usr/local/bin
                MAILDIR=/var/spool/mail
                DEFAULT=/var/spool/mail/chirico
                LOGFILE=/home/chirico/MailBAG
                MYHOME=/home/chirico
                #  Must have folder MailTRASH
                TRASH=/home/chirico/MailTRASH
                
                # Will get everything from this mail
                :0
                * ^From:.*sporkey@comcast.net
                        $DEFAULT
                
                # Spamassassin
                :0fw
                * <300000
                |/usr/local/bin/spamassassin

      Reference:
        http://pm-doc.sourceforge.net/



TIP 93:

     Make Graphs: using dot and neato.

       $ dot -Tpng dotfile -o myout.png

     To see the output reference the following:
       http://souptonuts.sourceforge.net/code/myout.png

     Where "dotfile" is the following:

       $ cat dotfile

       digraph g
       {
               node [shape = record];

               node0 [ label ="<f0> stuff | <f1> J | <f2> "];
               node1 [ label ="<f0> | <f1> E | <f2> "];
               node4 [ label ="<f0> | <f1> C | <f2> "];
               node6 [ label ="<f0> | <f1> I | <f2> "];
               node2 [ label ="<f0> | <f1> U | <f2> "];
               node5 [ label ="<f0> | <f1> N | <f2> "];
               node9 [ label ="<f0> | <f1> Y | <f2> "];
               node8 [ label ="<f0> | <f1> W | <f2> "];
               node10 [ label ="<f0> | <f1> Z | <f2> "];
               node7 [ label ="<f0> | <f1> A | <f2> "];
               node3 [ label ="<f0> | <f1> G | <f2> "];


               "node0":f0 -> "node1":f1;
               "node0":f2 -> "node2":f1;

               "node1":f0 -> "node4":f1;
               "node1":f2 -> "node6":f1;
               "node4":f0 -> "node7":f1;
               "node4":f2 -> "node3":f1;

               "node2":f0 -> "node5":f1;
               "node2":f2 -> "node9":f1;

               "node9":f0 -> "node8":f1;
               "node9":f2 -> "node10":f1;
       }

     Checkout the following article:
        http://www.linuxjournal.com/article.php?sid=7275

     To download this software
        http://www.graphviz.org/



TIP 94:

     Makefile: working with conditions


     First note that all the indentations of the file must be
     a single tab. There cannot be any spaces, or make will
     not run.

       $ cat Makefile

        # Compiler flags
        sqliteLIB := $(shell ls /usr/local/lib/libsqlite.so)
        sqlite3LIB := $(shell ls /usr/local/lib/libsqlite3.so)
        # all assumes sqlite and sqlite3 are installed
        #

        test:
        ifeq ("$(sqlite3LIB)","/usr/local/lib/libsqlite3.so")
             @echo -e "True -- we found the file"
        else
             @echo "False -- we did not find the file"
        endif


     So, if I run make I will get the following output.

       $ make
       True -- we found the file

     This is because I have a file /usr/local/lib/libsqlite3.so on my system.
     Note how the assignment is made, with the shell command

           sqlite3LIB := $(shell ls /usr/local/lib/libsqlite3.so)



TIP 95:

     Bash: Conditional Expressions

          if [ -e /etc/ntp.conf ]
            then
              echo "You have the ntp config file"
            else
              echo "You do not have the ntp config file"
          fi

       Now using an AND condition inside the [ ]. By the way, above, you
       can put the "then" on the same line as the if "if [ -e /etc/ntp.conf ]; then"
       as long as you use the ";".

           if [ \( -e /etc/ntp.conf \) -a \( -e /etc/ntp/ntpservers \) ]
             then
               echo "You have ntp config and ntpservers"
             elif [ -e /etc/ntp.conf ]; then
               echo " You just have ntp.conf "
             elif [ -e /etc/ntp/ntpservers ]; then
               echo " You just have ntpservers "
             else
               echo " you have neither ntp.conf or ntpservers"
           fi

        A few things to note above. Else if statement is written as "elif", and when
        dealing with "(" you will need to insert "\(". By the way "-o" can replace "-a"
        and the "-o" is for OR condition. AND can be done as follows too.

           if [ -e /etc/ntp.conf ] && [ -e /etc/ntp/ntpservers ]
             then
               echo "You have ntp config and ntpservers"
             elif [ -e /etc/ntp.conf ]; then
               echo " You just have ntp.conf "
             elif [ -e /etc/ntp/ntpservers ]; then
               echo " You just have ntpservers "
             else
               echo " you have neither ntp.conf or ntpservers"
           fi

          Conditional Expressions (files).


             -b file      True if file exists and is a block file
             -c file      True if file exists and is a character device file
             -d file      True if file exists and is a directory
             -e file      True if file exists
             -f file      True if file exists and is a regular file
             -g file      True if file exists and is set goup id
             -G file      True if owned by the effective group ID

             -k file      True if "sticky" bit is set and file exists
             -L file      True if file exists and is a symbolic link
             -n string    True if string is non-null

             -O file      Ture if file exists and is owned by the effective user ID

             -p file      True if file is a named pipe (FIFO)
             -r file      True if file is readable
             -s file      True if file has size > 0
             -S file      True if file exists and is a socket

             -t file      True if file is open and refers to a terminal.
             -u file      True if setuid bit is set
             -w file      True if file exists and is writeable
             -x file      True if file executable
             -x dir       True if directory can be searched

             file1 -nt file2     True if file1 modification date newer than file2
             file1 -ot file2     True if file1 modification date older than file2
             file1 -ef file2     True if file1 and file2 have same inode

          Conditional Expressions (Integers).

             -lt  Less than
             -le  Less than or equal
             -eq  Equal
             -ge  Greater than or equal
             -gt  Greater than
             -ne  Not equal

          Example usage.

            #!/bin/bash
             {
               while read num value; do
                if [ $num -gt  2 ]; then
                  echo $value
                fi
               done
             } < somefile


          Conditional Expressions (Strings).

             str1 = str2      str1 matches str2
             str1 != str2     str1 does not matches str2
             str1 < str2      str1 is less than str2
             str1 >  str2     str1 is greater than str2
             -n str1          str1 is not null (length greater than 0)
             -z str1          str1 is null (las length 0)



TIP 96:

     CVS: Working with cvs

      INITIAL REPOSITORY:

       To create a repository, and this is normally done by the system admin. This
       is NOT creating a project to checkout, but the location where everything
       will be stored! The initial repository!

             cvs -d repository_root_directory init

       Or here is a specific example:

             cvs -d /work/cvsREPOSITORY/   init

       Creating a directory tree from scratch. For a new project, the easiest thing to
       do is probably to create an empty directory structure, like this:

             $ mkdir sqlite_examples
             $ mkdir sqlite_examples/man
             $ mkdir sqlite_examples/testing


       After that, you use the import command to create the
       corresponding (empty) directory structure inside the repository:


             $ cd <directory>
             $ cvs -d repository_root_directory import  -m "Created directory structure" yoyodyne/dir yoyo start

       Or, here is a specific example.

             $  cd sqlite_examples
             $  cvs  -d /work/cvsREPOSITORY/ import -m 'test SQlite'  sqlite_examples sqlite_examples start

       Now, you can delete the directory sqlite_examples, or go to another directory and type
       the following:

             $ cvs -d /work/cvsREPOSITORY/ co sqlite_examples

     COOL TOOLS:

           1. cvsps
           2. cvsreport

         cvsps which you can find at http://www.cobite.com/cvsps/cvsps-2.0rc1.tar.gz

             $ cvsps -f README_sqlite_tutorial.html



TIP 97:

     Common vi and vim commands

           Command mode ESC

                dd       delete
                u        undelete
                y        yank (copy to buffer)
                p/P      p before cursor/P after cursor

                Ctl-g    show current line number
                shft-G   end of file
              n shft-G   move to line n

               /stuff/   search
                  n   repeat in same direction
                  N   repeat in opposite direction
                  /return  repeat seach forward
                  ?return  repeat seach backward

               "dyy  Yank current line to buffer d
               "a7yy Yank next 7 lines to buffer a
                    or
               :1,7ya a  Yank [ya] lines 1,7 to buffer a
               :1,7ya b  Yank [ya] lines 1,7 to buffer b

               :5 pu b   Put [pu] buffer b after line 5

               "dP   Put the content of buffer d before cursor
               "ap   Put the contents of buffer a after cursor

               :1,4 w! file2  Write lines 1,4 to file2
               :1,3

               :set nu     Display line numbers
               :set nonum  Turns off display

               :e <filename> Edit a file in a new buffer

            vim
               :split
               :split <filename>
               :sp <filename>
               :split new

                   ctl-w   To move between windows
                   ctl-w+
                   ctl-w-  To change size
                   ctl+wv  Split windows vertically
                   ctl-wq  Close window

               :only       To view only 1 window

            vim dictionary - put the following command in ~/.vimrc

                   set dictionary+=/usr/share/dict/words
                   set thesaurus+=/usr/share/dict/words
              
               Now, after you type a word <ctl-x><ctl-k><ctl-n> and to 
               go back in the listing <ctl-p>

                   butter<ctl-x><ctl-k><ctl-n>



TIP 98:

     Using apt-get

          $ apt-get update
          $ apt-get -s install <pkage>    <---- if everything is ok, then, remove the s

     Note you may want to use dpkg to purge if you have to do a reinstall.

          $ dpkg --purge exim4-base
          $ dpkg --purge exim4-config
          $ apt-get install exim4

          $ dpkg-reconfigure exim4-config
        


TIP 99:

     Mounting a cdrom on openbsd and installing packages

          $ mkdir -p /cdrom
          $ mount /dev/cd0a /cdrom
          $ cd /cdrom

     To add packages

          $ pkg_add -v  <directory>

     Mounting a cdrom on linux to a user's home sub-directory:

          $ mkdir -p /home/chirico/cdrom
          $ mount /dev/cdrom /home/chirico/cdrom



TIP 100:

    Creating a boot floppy for knoppix cd:

          $ dd if=/mnt/cdrom/KNOPPIX/boot.img of=/dev/fd0 bs=1440k

    References:
        http://www.knoppix.net/docs/index.php/BootFloppyHowTo

    For a lot of the knoppix how-to's
        http://www.knoppix.net/docs/index.php/



TIP 101:

    Diction and Style Tools for Linux  http://ftp.gnu.org/gnu/diction/

        $ diction mytext|less

    Or, this can be done interactively

        $ diction
        This is more text to read and you can do with it
        what you want.
        (stdin):1: This is more text to read and you [can -> (do not confuse with "may")] do with it what you want.

    DESCRIPTION
       Diction finds all sentences in a document, that contain phrases from  a
       database  of  frequently  misused,  bad  or  wordy diction.  It further
       checks for double words.  If no files are given, the document  is  read
       from  standard input.  Each found phrase is enclosed in [ ] (brackets).
       Suggestions and advice, if any, are printed headed by a right arrow ->.
       A  sentence is a sequence of words, that starts with a capitalised word
       and ends with a full stop, double colon, question mark or  exclaimation
       mark.  A single letter followed by a dot is considered an abbreviation,
       so it does not terminate a sentence.   Various  multi-letter  abbrevia-
       tions are recognized, they do not terminate a sentence as well.



TIP 102:

    Using a mail alias.

       Suppose all root mail on your system to go to one root account root@main.com

       In the following file:

             /etc/aliases

       Add this line

             root:    root@main.com

       Next, run newaliases [/usr/bin/newaliases] as follows:

             $ newaliases


       Special note: It's possible to send mail to more than one address. Suppose you want
                     mail going to root@main.com above, plus you want it going to user donkey
                     on the local system.

             root:  root@main.com donkey



TIP 103:

    Chrony - this service is similiar to ntp. It keeps accurate time
            on your computer against a very accurate clock in across
            a network with various time delays.

    Reference: http://go.to/chrony

        In the file "/etc/chrony/chrony.conf" add/replace the following

             server 146.186.218.60
             server 128.118.25.3
             server 128.2.129.21

        Next start the chrony service

           $ /etc/init.d/chrony restart

     Next verify that this is working. It may take 20 or 30 minutes to update
     the clock.


     Shell command:
       # chronyc
       chronyc> sourcestats
       210 Number of sources = 3
       Name/IP Address            NP  NR  Span  Frequency   Freq Skew   Std Dev
       ========================================================================
       b50.cede.psu.edu            2   0    64       0.000    2000.000  4000ms
       otc2.psu.edu                2   0    66       0.000    2000.000  4000ms
       FS3.ECE.CMU.EDU             2   0    64       0.000    2000.000  4000ms
       chronyc>

    It is probably best to let chrony do its work. However, if you want to
    set both the hardware and software clock, the following will work:

      Sets the hardware clock
        # hwclock --set --date="12/10/04 10:18:05"
      Sync the hardware clock to software
        # hwclock --hctosys

    Normally the system keep accurate time with the software clock.



TIP 104:

    NFS mount

     SERVER (192.168.1.182)

       Make sure nfs is running on the server
 
           $ /etc/init.d/nfs restart

       At the server the contents of /etc/exports for
       allowing 2 computers (192.168.1.171 and 192.168.1.71)
       to access the home directory of this server. Note that
       read write (rw) access is allowed.

          $ cat /etc/exports
         /home   192.168.1.171(rw)
         /home   192.168.1.71(rw)

       Or, if you have a lot of clients on 192.168.1.* then consider
       the following:

          /home 192.168.1.0/255.255.252.0(rw)

       Next, still at the server, run the exportfs command

          $ exportfs -rv

       IPTABLES (lokkit). If you're using fedora with default lokkit firewall
                then you can put the following under "Other ports".

                  Other ports nfs:tcp nfs:udp


       If the above does not work or you are not using lokkit
        IPTABLES (values in /etc/sysconfig/iptables on SERVER )

        # NFS Need to accept fragmented packets and may not have header
        #             so you will not know where they are coming from
        -A INPUT -f -j ACCEPT
        -A INPUT -p tcp -m tcp -s 192.168.1.171 -m multiport --dports 111,683,686,685,1026,2049,2219  -j ACCEPT
        -A INPUT -p tcp -s 192.168.1.171 -d 0/0 --dport 32765:32768  -j ACCEPT
        -A INPUT -p udp -m udp -s 192.168.1.171 -m multiport --dports 111,683,686,685,1026,2049,2219  -j ACCEPT
        -A INPUT -p udp -s 192.168.1.171 -d 0/0 --dport 32765:32768  -j ACCEPT
        
        -A INPUT -f -j ACCEPT
        -A INPUT -p tcp -m tcp -s 192.168.1.71 -m multiport --dports 111,683,686,685,1026,2049,2219  -j ACCEPT
        -A INPUT -p tcp -s 192.168.1.71 -d 0/0 --dport 32765:32768  -j ACCEPT
        -A INPUT -p udp -m udp -s 192.168.1.71 -m multiport --dports 111,683,686,685,1026,2049,2219  -j ACCEPT
        -A INPUT -p udp -s 192.168.1.71 -d 0/0 --dport 32765:32768  -j ACCEPT

        (Reference: http://nfs.sourceforge.net/nfs-howto/server.html)
                  and
        (Reference: http://nfs.sourceforge.net/nfs-howto/security.html)


     CLIENT1 (192.168.1.171)

          $ mkdir -p /home2

          $ cat /etc/fstab
         192.168.1.182:/home          /home2     nfs     rw 0 0

          $ mount -a -t nfs

        Or to do a one time mounting by hand

          $ mount -t nfs 192.168.1.182:/home  /home2

        Now /home2 on the client will be /home on the server

        Reference:
          http://nfs.sourceforge.net/nfs-howto/index.html

     MONITOR NFS:

        To monitor the client:

          $ nfsstat -c

           Also note you can "cat /proc/net/rpc/nfs" as well.

       To monitor the server (note the -s instead of the -c).

         $ nfsstat -s

           Also note you can "cat /proc/net/rpc/nfsd" as well.


       The following "cat" command is done on the NFS server, and shows which
       clients are mounting. This does not go with examples above. By the way,
       "root_squash" is the default, and means that root access on the clients is
       denied. So, how does the client root get access to these filesystems? You have
       to "su - <someuser>".

              $ cat /proc/fs/nfs/exports
              # Version 1.1
              # Path Client(Flags) # IPs
              /home   192.168.1.102(rw,root_squash,sync,wdelay)
              /home   squeezel.squeezel.com(rw,root_squash,sync,wdelay)
              /home   192.168.1.106(rw,root_squash,sync,wdelay)
              /home   livingroom.squeezel.com(rw,root_squash,sync,wdelay)
              /home   10.8.0.1(rw,root_squash,sync,wdelay)
              /home   closet.squeezel.com(rw,root_squash,sync,wdelay)

     (Reference: http://www.vanemery.com/Linux/NFSv4/NFSv4-no-rpcsec.html#automount )




TIP 105:

      Ports used for Microsoft products
               http://www.microsoft.com/canada/smallbiz/sgc/articles/ref_net_ports_ms_prod.mspx?pf=true
          Firewalling?
               http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/428c1bbf-2ceb-4f76-a1ef-0219982eca10.mspx

      To find out common port mappings, take a look at "/etc/services"



TIP 106:

      Man pages: If man pages are formatting incorrectly with PuTTY, try editing
      the "/etc/man.config" file with the following changes:

           NROFF /usr/bin/groff -Tlatin1 -mandoc
           NEQN /usr/bin/geqn -Tlatin1

         (Reference TIP 7 for using man)



TIP 107:

      Valgrind: check for memory leaks in your programs. (http://valgrind.org/)

       This is how you can run it on the program "a.out" for valgrind version 2.2.0

         $ valgrind --logfile=valgrind.output   --tool=memcheck ./a.out

       This is how you write the logfile "--log-file" for valgrind-3.0.1

         $ valgrind  --log-file=valgrind --leak-check=yes --tool=memcheck ./a.out

       With C++ programs with gcc 3.4 and later that use STL, export GLIBCXX_FORCE_NEW 
       only when testing to disable memory caching. Remember to enable for production
       as this will have a performance penalty. Reference  http://valgrind.org/docs/FAQ/ 



TIP 108:

      Runlevel Configuring.

       These two programs, run as root give you a ncurses GUI to what will
       run on your system on boot.

            # ntsysv

            # chkconfig

       Note, you can also set these manually. For example, normally you will
       have files in "/etc/init.d/" that will take parameters like "start","stop"
       "restart".

       Take a look at "/etc/init.d/mysql" this file will start and stop the
       mysql daemon. So, how does know which run levels, and the order it gets
       loaded in the run level to other programs? By the K<number> and S<number>
       values.

            $ ls /etc/rc3.d/*mysql

                /etc/rc3.d/K85mysql
                /etc/rc3.d/S85mysql

       So here on my system the start value is 85. Looking in /etc/rc3.d, which is
       run level 3, any program with a lower number S84something will get loaded
       before mysql.

       I manually set the run level as follows for mysql.

            # cd /etc/rc3.d
            # ln -s ../init.d/mysql S85mysql
            # ln -s ../init.d/mysql K85mysql

            # cd /etc/rc5.d
            # ln -s ../init.d/mysql S85mysql
            # ln -s ../init.d/mysql K85mysql

       Note that I could have chose other numbers as well. "ntsysv" gives
       you a graphical interface.

       This is a way of doing this with "chkconfig" at the command prompt.

            # chkconfig --list mysqld
            mysqld          0:off   1:off   2:off   3:on    4:off   5:on    6:off

       Above you can see it's on. Here's how we would have turned this on with chkconfig.

            # chkconfig --level 35 mysqld on




TIP 109:

       File Alteration Monitor - Gamin a FAM replacement
        http://www.gnome.org/~veillard/gamin/
        http://www.gnome.org/~veillard/gamin/sources/
       ******  EXAMPLE NOT COMPLETE *****

       Working with fam  - file alteration monitor.  Mail uses this to signify
           a change in a file's status.

        Below is the sample C program ftest.c which can be compiled as
        follows:

              $ gcc -o ftest ftest.c  -lfam

        You will need to work with this as root

              #  ./ftest <somefile absolute path>


          Reference:
            http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?db=man&fname=/usr/share/catman/p_man/cat3x/fam.z
            http://www.devchannel.org/devtoolschannel/04/05/13/2146252.shtml



TIP 110:

       glibc - this is the main library used by C, and the following
        link below gives you examples on everything from sockets,math,
        date and time functions, user environment, and much more.

         http://www.gnu.org/software/libc/manual/html_mono/libc.html

       How do you know which version of glibc you are running?

          #include <stdio.h>
          #include <gnu/libc-version.h>
          int main (void)
           {
             puts (gnu_get_libc_version ());
             return 0;
           }



TIP 111:

       nslookup and dig - query Internet name servers interactively.

         $ nslookup
         >chirico.org
         Server:        68.80.0.6
         Address:       68.80.0.6#53

         Name: chirico.org
         Address: 66.35.250.210
         >

      The nslookup command will query the dns server is "/etc/resolve.conf"
      However, you can force a certain dns with "- server".  For example the
      command below goes to the server named dilbert

         $ nslookup - dilbert
         >

      dig:

      dig gives you more information. You should probably use dig instead
      of nslookup.

      Below I am forcing the lookup from DNS 68.80.0.6 of the name chirico.org, and
      note that the query time is return too.

         $ dig @68.80.0.6  +qr chirico.org

         ; <<>> DiG 9.2.1 <<>> @68.80.0.6 +qr chirico.org
         ;; global options:  printcmd
         ;; Sending:
         ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55908
         ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
        
         ;; QUESTION SECTION:
         ;chirico.org.                   IN      A
        
         ;; Got answer:
         ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55908
         ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2
        
         ;; QUESTION SECTION:
         ;chirico.org.                   IN      A
        
         ;; ANSWER SECTION:
         chirico.org.            5538    IN      A       66.35.250.210
        
         ;; AUTHORITY SECTION:
         chirico.org.            30599   IN      NS      ns78.worldnic.com.
         chirico.org.            30599   IN      NS      ns77.worldnic.com.
        
         ;; ADDITIONAL SECTION:
         ns78.worldnic.com.      16022   IN      A       216.168.225.218
         ns77.worldnic.com.      7       IN      A       216.168.228.41
        
         ;; Query time: 155 msec
         ;; SERVER: 68.80.0.6#53(68.80.0.6)
         ;; WHEN: Thu Dec 23 07:48:23 2004
         ;; MSG SIZE  rcvd: 127

      So what if you wanted to know what name the IP address 66.35.250.210
      resolves to, when using dns 68.80.0.12.

          $ dig @68.80.0.12 -x 66.35.250.210
          ...
          ;; ANSWER SECTION:
          210.250.35.66.in-addr.arpa. 3600 IN   CNAME   210.0/24.250.35.66.in-addr.arpa.
          210.0/24.250.35.66.in-addr.arpa. 3600 IN PTR  vhost.sourceforge.net.

      Above you can see it resolved to "vhost.sourceforge.net"

      Reference ( http://www.tldp.org/HOWTO/DNS-HOWTO-5.html )
        Also see TIP 223.



TIP 112:

       Using GNU Autotools - so you can produce the familiar "./configure"  "make"  and "make install"
                             commands. There is also a "make dist".

                The program sqlite3api.cc and the rest of this code can be found at
                 http://prdownloads.sourceforge.net/cpearls/autotools.tar.gz?download


         A "Makefile.am" is required:

            bin_PROGRAMS = sprog
            sprog_SOURCES = sqlite3api.cc
            sprog_LDADD = @INCLUDES@ @SQLIBOBJS@


         In addition, a "configure.in" file is required. Note, AC_CHECK_LIB will
         check the "libsqlite3.so" file for the "sqlite3_open" file. Note that
         "sqlite3", is a shortcut for "libsqlite3" by convention. If this file
         is not found, AC_CHECK_FILE looks for "/usr/local/lib/libsqlite3.a". If
         this is found, then, "-lsqlite3" is added to the LIBS environment variable.
         Also, "-I/usr/local/include" and "-L/usr/local/lib" will be added on the
         command line. This is common when some one does not have the library in
         the path.  (See TIP 49)

            dnl Process this file with autoconf to produce a configure script.
            AC_INIT(sqlite3api.cc)
            AM_INIT_AUTOMAKE(sqliteprog, 1.0)
            AC_PROG_CXX
            CXXFLAGS='-Wall -W -O2 -s -pipe'
            AC_CHECK_LIB(sqlite3,sqlite3_open,[],found=no)
             if test "$found" = "no"; then
               AC_CHECK_FILE(/usr/local/lib/libsqlite3.a, found=yes)
               if test "$found" = "yes"; then
                 LIBS="$LIBS -lsqlite3"
                 INCLUDES="$INCLUDES -I/usr/local/include"
                 EXTRALIB='-L/usr/local/lib'
                else
                 echo "Are you SURE sqlite3 is installed?"
               fi
             fi
            SQLIBOBJS='-Wl,-R/usr/local/lib'
            AC_SUBST(INCLUDES)
            AC_SUBST(SQLIBOBJS)
            AC_SUBST(EXTRALIB)
            AC_OUTPUT(Makefile)


         To build the configure file, just run the following:

             $ aclocal
             $ autoconf
             $ touch NEWS README AUTHORS ChangeLog
             $ automake --add-missing

         Now if you want to make a tar.gz file "sqliteprog-1.0.tar.gz", then
         all you have to run is the following:

             $ make dist

         Note: did you ever want to save all the output from a ./configure? Well, it
               is automatically saved in the "config.log" file. In fact, this file may
               contain a lot more than what you saw on the screen.

               Also, you may need to rerun ./configure. But before you do, delete
               the "config.cache" file to get a clean build.



TIP 113:

       EMACS - common emacs commands.

         M is the ESC
         C or c is the Ctl

        Shell - when working in a shell. "M-x rename-uniquely" is good for split screen editing.

          M-x rename-uniquely   Use this for multiple shells (renames buffer so it's not the same shell)
          C-c C-z               Send job in background (when working in a shell)
          C-c C-o               commit-kill-output (gets rid of a lot of shell output)
          C-c C-r               reposition at beginning of output
          C-c C-e               reposition at end of output
          M-x send-invisible    Hide passwords - use this before typing a password

         Note: if the shell prompt does not show up correctly, then, you may want to creat a ".emacs_bash"
               file with the following contents:

                          PS1="emacs:\W \$ "

        Directories  (C-x d) give you a directory listing. You know all those annoying "~" and "#"
                     file that you get? You can easily delete these when in "dired" mode by hitting
                     "~", then  "d" to flag it for delete. Then, hit "x" to and confirm deletion.

                     These are other command that work on highlighted files in "dired" mode.

                          R   rename
                          v   view
                          Z   compress the file
                          +   create directory

        Other common commands:

          c-x l          list the line you are on, and how many lines in the document.
                         You will get something like: Page has 4881 lines (4440 + 442),
                         which means you are on the 4440 line.

          c-x rm bookmark make
          c-x rb bookmark bounce
        
          c-x rb notes
          c-x rb emacs
        
          c-x / <r> (save position in register <r>)
          c-x j <r> (jump to position in register <r>)
          c-x r SPC 1 (mark current point in register 1)
          c-x r j 1 (jump to marked point in register 1)
          c-x r t <string>  (insert string into register)
        
          c-x r s 1 (save marked region in register 1)
          c-x r i 1 (insert marked region)
        
          c-x c-o (delete all blank lines, except one)
        
          c-x z (repeat the last command ... stop with an a)
          c-x zz (repeat the last command twice)

          rectangle
          ---------
          C-SPC
          goto the next region
          C-x
          C-x
          then, C-x r r "name of register"
        
          to insert the register
          C-x r i "name of register"
        
          macros:
          -------
          c-x (    start macro
          c-x )    end macro
          c-x e    execute macro
        
          mail:
          -----
          c-x m   mail
          c-c c-s send
        
          C-x C-e
          (insert "\n\nExtra Line of text")
        
          ;; chirico functions in .emacs
          ;; This creates an html template
          (defun my-html ()
          (interactive)
          (insert "<html>
          <head>
          <META HTTP-EQUIV=\"Pragma\" CONTENT=\"no-cache\">
          <META HTTP-EQUIV=\"Expires\" CONTENT=\"-1\">
          </head>
          <body bgcolor=\"#ffffff\">
        
        
          </body>
          </html>")
          )

     Backspace issues when using "emacs -nw"? They putting the following in your "~/.emacs" file

             (global-set-key "\C-d" 'backward-delete-char)
             (global-set-key "\C-h" 'backward-delete-char)
             (global-set-key (kbd "DEL") 'delete-char)



TIP 114:

        ncftpget - an intelligent ftp client (http://www.ncftp.com/). Also
                   check your fedora or debian install. This package allows
                   you to easily download packages from ftp sites.

          This is an example of connect to an ftp site, with a subdirectory, and
          downloading all in one command.

           $ ncftpget ftp://ftp.gnu.org/pub/gnu/gcc/gcc-3.2.3/gcc-3.2.3.tar.gz

          Of if you want to get the fedora core 3 installs

           $ ncftpget ftp://ftp.linux.ncsu.edu/pub/fedora/linux/core/3/i386/iso/FC3*



TIP 115:

        expr - evaluate expressions. You can use this on the command line

           $ expr 6 + 4
           10

         Note the spaces. Without spaces, you get the following:

           $ expr 6+4
           6+4

         If you're using "*", you'll need a "\" before it

           $ expr 10 \* 10
           100

         This also works for variables

           $ var1=34
           $ expr $var1 + 3
           37

         or

           $ var1=2
           $ var1=`expr $var1 \* 2`
           $ echo $var1
           4

         see (TIP 25) you can get the cosine(.23)

           $ var1=`echo "c(.23)"|bc -l`
           $ echo $var1
           .97366639500537483696


         You can also do substrings:

           $ expr substr "BigBear" 4 4
           Bear

         And length of strings

           $ mstr="12345"
           $ expr length $mstr
           5

         Regular expressions

           $ expr "a3" : [a-z][1-9]
           2

         Or you can get a bit fancy

           $ myexpr="[a-z][1-9]"
           $ echo $myexpr
           [a-z][1-9]

           $ expr "a3" : $myexpr
           2

         This may not be the best way to find out if it is Friday, but
         it seems to work. It's more of an exercise in xargs.

           $ date
           Fri Dec 31 16:44:47 EST 2004
           $ date|xargs -i expr {} : "[Fri]"
           1



TIP 116:

        eval

           $ mypipe="|"
           $ eval ls $mypipe wc
           6       6     129

        Did you catch that? The above statement is the same as

           $ ls | wc

        Where "|" is put into the variable $mypipe

        (also see TIP 118)



TIP 117:

        lxr, glimpse, patchset - tools for reading the kernel source

          This example puts some of the files in /home/src since my home
          partition is the largest. Plus, you do not want to over write
          the source in /usr/src/ If you want to put your files elsewhere
          just substitute /home/src for your desired directory.

         patchset -- download and setup

            $ export SRCDIR=/home/src
            $ cd $SRCDIR
            $ wget http://www.csn.ul.ie/~mel/projects/patchset/patchset-0.5.tar.gz
            $ export PATH=$PATH:$SRCDIR/patchset-0.5/bin

          Now edit "/home/src/patchset-0.5/etc/patchset.conf" and set WWW_USER to
          whatever your website runs as

                  export WWW_USER=nobody

          Getting kernel source. The last step builds and asks a lot of questions. Enter
          yes to things that interest you, since this is what you will see in the source
          code. It is not going to build for booting. The "downlaod -p" is for downloading
          a patch.

            $ download 2.6.10
            $ createset 2.6.10
            $ make-kernel -b 2.6.10

        glimpse -- download and setup

            $ mkdir -p /home/src/glimpse
            $ cd /home/src/glimpse
            $ wget http://webglimpse.net/trial/glimpse-latest.tar.gz
            $ tar -xzf glimpse-latest.tar.gz
            $ cd glimpse-4.18.0
            $ ./configure; make
            $ make install

        lxr -- download and setup

            $ make -p /home/src/lxr
            $ cd /home/src/lxr
            $ wget http://heanet.dl.sourceforge.net/sourceforge/lxr/lxr-0.3.1.tar.gz
            $ cd lxr-0.3

          Edit "Makefile" and set PERLBIN to "/usr/bin/perl" or the where perl is
          on your system. Also set INSTALLPREFIX to "/var/www/lxr".  Then, as root
          do the following:

            $ make install

         Apache changes

          Next edit the apache httpd.conf. On my system it is
          "/usr/local/apache2/conf/httpd.conf", but if you did a fedora install
          I think this file is located at "/etc/httpd/conf/httpd.conf".

             Alias  /lxr/ "/var/www/lxr/"
             <Directory "/var/www/lxr/">
               Options ExecCGI Indexes Includes FollowSymLinks MultiViews
                AllowOverride all
                Order allow,deny
                Allow from all

              <Files ~ (search|source|ident|diff|find)>
                    SetHandler cgi-script
              </Files>
             </Directory>

          lxr - continued "/var/www/lxr/http/lxr.conf" changes.  The following contains
                my lxr.conf with changes made to almost every variable. Make sure you use
                your website in place of 192.168.1.71

                 # Configuration file.
                
                 # Define typed variable "v", read valueset from file.
                 variable: v, Version, [/var/www/lxr/source/versions], [/var/www/lxr/source/defversion]
                
                 # Define typed variable "a".  First value is default.
                 variable: a, Architecture, (i386, alpha, m68k, mips, ppc, sparc, sparc64)
                
                 # Define the base url for the LXR files.
                 baseurl: http://192.168.1.71/lxr/http/
                
                 # These are the templates for the HTML heading, directory listing and
                 # footer, respectively.
                 htmlhead: /var/www/lxr/http/template-head
                 htmltail: /var/www/lxr/http/template-tail
                 htmldir:  /var/www/lxr/http/template-dir
                
                 # The source is here.
                 sourceroot: /var/www/lxr/source/$v/
                 srcrootname: Linux
                
                 # "#include <foo.h>" is mapped to this directory (in the LXR source
                 # tree)
                 incprefix: /include
                
                 # The database files go here.
                 dbdir: /var/www/lxr/source/$v/
                
                 # Glimpse can be found here.
                 glimpsebin: /usr/local/bin/glimpse
                
                 # The power of regexps.  This is pretty Linux-specific, but quite
                 # useful.  Tinker with it and see what it does.  (How's that for
                 # documentation?)
                 map: /include/asm[^\/]*/ /include/asm-$a/
                 map: /arch/[^\/]+/ /arch/$a/

         Now you should be ready to run "make-lxr". Make sure the path is setup to patchset,
         which is repeated here. The last step take awhile.

            $ export SRCDIR=/home/src
            $ cd $SRCDIR
            $ export PATH=$PATH:$SRCDIR/patchset-0.5/bin

            $  make-lxr 2.6.10

         Now you need to index the source. Below the ./glimpse_* file will be put in
         root. Checkout the -H option if you do not want them here on a temporary
         bases of if you run out of room.

            $ glimpseindex -o -t -w 5000 /var/www/lxr/source/2.6.10 >& .glimpse_out

         Since the above put the files under /root/.glimpse_* they should be moved

            $ mv /root/.glimps_* /var/www/lxr/source/2.6.10/.
            $ chown -R nobody.nobody ./.glimpse_*



TIP 118:

        exec - you can change standard output and input without starting a new
               process.

          The exec redirect the output from ls and date to a file. Nothing
          is show on the terminal until "exec > /dev/tty" is performed

            $ exec > mfile
            $ ls
            $ date
            $ exec > /dev/tty

          This is an example of assigning file descriptor 3 to file "output3" for
          output, then, redirecting "ls" to this descriptor. Finally, file descriptor
          3 is used for input, and the contents are read into the cat command.


            $ exec 3>output3
            $ ls  >& 3
            $ exec 3<output3
            $ cat <&3
            ChangeLog
            CVS
            How_to_Linux_and_Open_Source.txt
            How_to_Linux_and_Open_Source.txt.~1.193.~
            mfile
            mfile2
            mfile3
            mftp
            output3

        Could you redirect the output to 3 files and stderr?

            $ exec 3>output3
            $ exec 4>output4
            $ exec 5>output5

            $ ls >& 3 >& 4 >& 5 >& 2   // Nope, can't do this.
            output3  output4  output5

         Instead, you should do the following:

            $ ls | tee output3 | tee output4 |tee output5

         Closing the "output" file descriptor

            $ >&3-

         Closing the "input" file descriptor

            $ 3<&-

         See what is still open on 0-10

            $ lsof -a -p $$ -d 0-10

         Recursion - the following counts to 5, then, quits.

            #!/bin/bash
            sleep 1
            declare -x n
            let n=${n:=0}+1
            [ $n -le 5 ] && echo "$n" &&  exec $0

         There are some real-life applications for this technique, as follows:

            #!/bin/bash
            declare -x N
            declare -x n
            N=${N:=$(od -vAn -N1 -tu4 < /dev/urandom)}
            let n=${n:=0}+1
            [ $(($n%2)) -eq 0 ] && echo "She Loves Me!" || echo "She Loves Me NOT!"
            [ $n -lt $N ] &&  exec $0



TIP 119:

        runlevel - need to know the current runlevel?

           $ who -r
           run-level 3  Dec 31 19:02                   last=S

        Need to know the architecture?

          $ arch
          i686



TIP 120:

        at - executes commands at a specified time.

         A few examples here. The 1970 program will run
         next Auguest 2 even though the year 1970 has long past.

          $ at 6:30am Jan 12 < program
          $ at noon tomorrow < program
          $ at 1970 pm August 2 < program

        This is an interactive way to use the command:

          $ at now + 6 minutes
          warning: commands will be executed using (in order) a) $SHELL b) login shell c) /bin/sh
          at> ls
          at> date > /tmp/5min
          at> ^D
          job 3 at 2005-01-01 08:50

        What jobs are in the queue?

          $ atq

        or

          $ at -l



TIP 121:

        Creating a Manpage

         As root you can copy the following to /usr/local/man/man1/soup.1 which will
         give you a manpage for soup.

              .\" Manpage for souptonuts.
              .\" Contact mchirico@users.sourceforge.com to correct errors or omissions.
              .TH man 1 "04 January 2005" "1.0" "souptonuts man page"
              .SH NAME
              soup \- man page for souptonuts
              .SH SYNOPSIS
              soup
              .SH DESCRIPTION
              souptonuts is a collection of linux and open
              source tips.
              off for golf.
              .SH OPTIONS
              The souptonuts does not take any options.
              .SH SEE ALSO
              doughnut(1), golf(8)
              .SH BUGS
              No known bugs at this time.
              .SH AUTHOR
              Mike Chirico (mchirico@comcast.net mchirico@users.sourceforge.net)

         So, to view this man page

            $ man soup

         It's also possible to compress

            $ gzip /usr/local/man/man1/soup.1

         For plenty of examples look at the other man pages. Also the following
         is helpful. The last one is a tutorial "man 7 mdoc"

            $ man manpath
            $ man groff
            $ man 7 mdoc



TIP 122:

        dmesg - print out boot messages, or what is in the kernel ring buffer.

          If you missed the messages on boot-up, you can use dmesg to print them.

            $ dmesg > boot.msg

          Or to print, then, clear the ring

            # dmesg -c > boot.msg

          (also see TIP 20)



TIP 123:

        gnus - emacs email nntp news reader (comcast as example with NO TLS or SSL)

          First check that you can connect to the news group:

                 $ telnet newsgroups.comcast.net 119
                 Trying 216.196.97.136...
                 Connected to newsgroups.comcast.net.
                 Escape character is '^]'.
                 200 News.GigaNews.Com

          If you want to check for TLS or SSL see (TIP 54).

          Here is a very simple configuration example without encryption. It
          appears that comcast does not support ssl or TLS.

          In the "~/.emacs" file you would add the following to get comcast
          news groups

             (setq gnus-select-method '(nntp "newsgroups.comcast.net"))

          Then, create an "~/.authinfo" file with the following settings using
          you own username and password.

             machine newsgroups.comcast.net login borkey@comcast.net  password borkeypass0rd

          Next create a "~/.newsrc" with your groups

             news.announce.newusers:
             comp.lang.c++.moderated! 1-500
             comp.unix.programmer! 1-500
             comp.unix.shell! 1-500
             gnu.emacs.gnus! 1-500

          Finally, create a "~/.gnus" with the following email settings for you

             (setq user-mail-address "mchirico@comcast.net")

             (defun my-message-mode-setup ()
               (setq fill-column 72)
               (turn-on-auto-fill))
               (add-hook 'message-mode-hook 'my-message-mode-setup)

          To get into gnus

              E-x gnus

          The following are common gnus commands

                RET  view the article under the cursor

                A A (shift-a, shift a): List all newsgroups known
                                        to the server.

                l (lower-case L)      : List only  subscribed groups
                                        with unread articles.

                L                     : List all newsgroups in .newsrc file.

                g                     : See if new articles have arrived.

            Some commands for reading

                n  next unread article

                p  previous article

                SPC  scroll down  moves to next unread
                     when at the bottom of the article

                del  scroll up

                F  follow-up to group on the article you are
                   reading now.

                f  follow-up to group without citing the article

                R  reply by mail and cite the article

                r  reply by mail without citing the article

                m  new mail

                a  new posting

                c  Catchup

                C-u / t  Show only young headers
                         / t without C-u limits the summary
                         to old headers

                T T  toggle threading

                C-u g  Display raw article
                       hit g to return to normal view

                t  Show all headers  it's a toggle

                W w  Wordwrap the current article

                W r  Decode ROT13  a toggle

                ^  fetch parent of article

                L  create a scorefile-entry based
                   on the current article (low score)
                   ? gives you information what each char means

                I  like L but high score

          Commands to send email

            C-c C-c  send message

            C-c C-d  save message as draft

            C-c C-k  kill message

            C-c C-m f  attach file

            M-q  reformat paragraph


TIP 124:

        Sending Email from telnet

           Note, if you are on the computer you can sometime use the local loopback.
           In fact, sometimes you can only use the local loop back 127.0.0.1 in
           place of "bozo.company.com"

            1     [mchirico@soup Notes]$ telnet bozo.company.com 25
            2     Trying 192.168.0.204...
            3     Connected to bozo.company.com.
            4     Escape character is '^]'.
            5     220 bozo.company.com ESMTP Postfix (Postfix-20010228-pl03) (Mandrake Linux)
            6     HELO fakedomain.com
            7     HELO fakedomain.com         // server echo
            8     250 bozo.company.com
            9     MAIL FROM: test@fakedomain.com
           10     MAIL FROM: test@fakedomain.com   // server echo
           11     250 Ok
           12     RCPT TO: mchirico@someother.com
           13     RCPT TO: mchirico@someother.com   // server echo
           14     250 Ok
           15     DATA
           16     DATA    // echo
           17     354 Enter mail, end with "." on a line by itself
           18     This is a test message
           19     This is a test message
           20     to send
           21     to send
           22     .
           23     250 2.0.0 j0B0uH3L018469 Message accepted for delivery

          Above on line 6 you can type in any domain name. Line 7 is an echo. All
          echos are listed in the comment field.



TIP 125:

          IP forwarding, IP Masquerade

             # echo 1 > /proc/sys/net/ipv4/ip_forward
             # ipchains -F forward
             # ipchains -P forward DENY
             # ipchains -A forward -s 192.168.0.0/24 -j MASQ
             # ipchains -A forward -i eth1 -j MASQ


          This assumes that your internal network is 192.168.0.0 on eth1, and the
          internet is connected to eth0.

          (Also See TIP 182)



TIP 126:

         Setting KDE as the default desktop manager

               Edit "/etc/sysconfig/desktop" to include the two lines:

                 DESKTOP="KDE"
                 DISPLAYMANAGER="KDE"



TIP 127:

        Have a file and you do not know whay type it is (tar, gz, ASCII, binary) ?
        Use the file command.  Below it is used on the file "mftp"

               $ file mftp
               mftp: Bourne-Again shell script text executable



TIP 128:

        Software RAID: Two good references

          http://www.tldp.org/HOWTO/Software-RAID-HOWTO-1.html
          http://lists.us.dell.com/pipermail/linux-poweredge/2003-July/014331.html

        Note, you must setup grub for each RAID 1 device. Suppose you have
        2 SCSI drives (sda and sdb). By default grub is setup on sda; but, you
        need to enable it for sdb (/dev/hdb for ide) as follows:

           grub>device (hd0) /dev/sdb
           grub>root (hd0,0)
           grub>setup (hd0)

           Checking if "/boot/grub/stage1" exists... no
           Checking if "/grub/stage1" exists... yes
           Checking if "/grub/stage2" exists... yes
           Checking if "/grub/e2fs_stage1_5" exists.. yes
           Running "embed /grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
          succeeded
           Running "install /grub/stage1 (hd0) (hd0)1+16 p (hd0,0)/grub/stage2 /grub/grub
         .conf"... succeeded.
         Done.

          grub>
          grub>quit


        Checking to see if everything is working:

          $ cat /proc/mdstat

        Checking the drives

          $ sfdisk -d /dev/sdb
          $ sfdisk -d /dev/sda

          $ fdisk -l /dev/sda  "This will give general information"
          $ fdisk -l           "General information for all drives"

        Adding raid (assume you want to add the first drive "sda1", or if it is the second
                    drive then substitute "sda2" below )

          $ raidhotadd /dev/md0 /dev/sda1
          $ raidhotadd /dev/md1 /dev/sda2
          $ raidhotadd /dev/md2 /dev/sda3

        This is an example of an cat /proc/mdstat that is working. Note that
        there is a listing for both sda1[0] and sdb1[1]

            $ cat /proc/mdstat

                Personalities : [raid1]
                read_ahead 1024 sectors
                Event: 12
                md0 : active raid1 sda1[0] sdb1[1]
                      104320 blocks [2/2] [UU]

                md1 : active raid1 sda2[0] sdb2[1]
                      1044160 blocks [2/2] [UU]

                md2 : active raid1 sda3[0] sdb3[1]
                      34411136 blocks [2/2] [UU]

                unused devices: <none>

        Compare that to this where md2 is missing sdb3

            $ cat /proc/mdstat

                Personalities : [raid1]
                read_ahead 1024 sectors
                Event: 9
                md0 : active raid1 sda1[0] sdb1[1]
                      104320 blocks [2/2] [UU]

                md1 : active raid1 sda2[0] sdb2[1]
                      1044160 blocks [2/2] [UU]

                md2 : active raid1 sdb3[1]        <---- HERE
                      34411136 blocks [2/1] [_U]

                unused devices: <none>

        If you are rebuilding an array, you can watch it by doing the following:

           $ watch -n1 cat /proc/mdstat

        Need to know the raid setup?

           $ cat /etc/raidtab




TIP 129:

        Resetting Redhat Linux Passwords using GRUB

           1. Press 'e'
           2. Press 'e' again
           3. Append 'single' to the kernel version listing

          See
             http://linuxgazette.net/107/tomar.html



TIP 130:

        mtr - matt's traceroute. This is an advanced traceroute that keeps
              [http://www.bitwizard.nl/mtr/]
                  $ mtr www.yahoo.com

                                              Matt's traceroute  [v0.52]
                     third-fl-71.localdomain                            Thu Jan 20 11:05:57 2005
                     Keys:  D - Display mode    R - Restart statistics    Q - Quit
                                                            Packets               Pings
                     Hostname                            %Loss  Rcv  Snt  Last Best  Avg  Worst
                      1. 192.168.1.1                        0%    3    3     0    0    0      1
                      2. ???
                      3. fe-2-6-rr01.willogrove5.pa.pa01    0%    3    3     8    7    7      8
                      4. srp-8-1-ar01.willowgrove1.pa.pa    0%    2    2     8    8    8      8
                      5. pos7-3-cr01.torresdale.pa.core.    0%    2    2     8    8    8      8
                      6. 12.119.53.53                       0%    2    2    12   12   12     13
                      7. tbr1-p012401.phlpa.ip.att.net      0%    2    2    12   12   13     13
                      8. tbr1-cl8.n54ny.ip.att.net          0%    2    2    13   13   13     13
                      9. ggr2-p310.n54ny.ip.att.net         0%    2    2    12   12   13     14
                     10. so-1-0-0.gar4.NewYork1.Level3.n    0%    2    2    14   14   37     61
                     11. ae-1-54.bbr2.NewYork1.Level3.ne    0%    2    2    13   12   13     13
                     12. ge-0-3-0.bbr2.Washington1.Level    0%    2    2    19   19   19     19
                     13. ge-1-1-51.car1.Washington1.Leve    0%    2    2    18   18   19     20
                     14. 4.79.228.6                         0%    2    2    21   19   20     21
                     15. UNKNOWN-216-109-120-201.yahoo.c    0%    2    2    21   20   20     21
                     16. w2.rc.vip.dcn.yahoo.com            0%    2    2    23   21   22     23



TIP 131:

        chfn - change finger information

            $ chfn

          Next you are asked for a password and user information.



TIP 132:

        chsh - change login shell

          First, you may want to get a listing of all the possible
          shells.

             $ chsh -l

               /bin/sh
               /bin/bash
               /sbin/nologin
               /bin/ash
               /bin/bsh
               /bin/ksh
               /usr/bin/ksh
               /usr/bin/pdksh
               /bin/tcsh
               /bin/csh
               /bin/zsh



TIP 133:

        bash - working with binary, hex and base 3.

         For the variable must be declare as an integer. Then
         specify the  <base>#<value>. The example below is 22 in
         base 3.

              $ declare -i n
              $ n=3#22
              $ echo $n
                8

           Base 16 (hex)

              $ declare -i n2
              $ n2=16#a
              $ echo $n2
                10

           Base 8 (octal)

              $ declare -i n3
              $ n3=8#11
              $ echo $n3
                9   Note 8+1=9



TIP 134:

        monitoring IP traffic. Try iptraf http://iptraf.seul.org/



TIP 135:

        enscript - convert text files to PostScript



TIP 136:

        dd and tar - blocking factor. How to determine the blocking factor, block size
                   so that tar and dd can work together.

        Step 1: Create a large file on local disk, in a directory "1" that will eventually
                be written to tape. This will be created with dd as follows:

                $ mkdir 1
                $ dd if=/dev/zero of=disk-image count=40960
                  40960+0 records in
                  40960+0 records out

                $ cd ..

        Step 2: tar the directory and contents to tape. First rewind the tape. These examples
                use /dev/nst0 as the location of the tape. Make sure to substitute your values
                if needed.

                $ mt -f /dev/nst0 rewind
                $ tar --label="Test 1" --create --blocking-factor=128 --file=/dev/nst0 1

        Step 3: Read data from the tape using a block size of 128k. If you get an I/O error, which
                could happend if you used a different blocking factor above, then, you may need
                to increase the bs to 256, or 512 etc. as needed.

                $ mt -f /dev/nst0 rewind
                $ dd if=/dev/nst0 bs=128k of=testblocksz count=1
                 0+1 records in
                 0+1 records out

                $ ls -l testblocksz
                 -rw-r--r--    1 root     root        65536 Feb  9 10:41 testblocksz

                $ ls -lh testblocksz
                 -rw-r--r--    1 root     root          64k Feb  9 10:41 testblocksz

               Note above that the size 65536 is equal to 64k. That "h" switch in "ls" is for
               human readable.


       Step 4: tar uses a multiplier of 512*blocking-factor to get block size. Again

                 512 * blocking-factor = block size used in dd command.

              Putting in the values, we see that

                 512 * 128 = 65536


       Step 5: So what does this tell you? You can now use these numbers to "dd" files
              to tape. But, first tar will be used to create the file locally.

                $ tar --label="Test 1" --create --blocking-factor=128 --file=test.tar 1


       Step 6: Send this to tape with the dd command. Remember 64k is equal to 65536.

                $ mt -f /dev/nst0 rewind
                $ dd if=test.tar bs=64k of=/dev/nst0


       Step 7: Now test that it can be read with tar command using blocking-factor=128.
             Note the "t" command in tar is for tell. It will not write data.

                $ mt -f /dev/nst0 rewind
                $ tar -tvf /dev/nst0 --blocking-factor=128
                 V--------- 0/0               0 2005-02-09 10:38:20 Test 1--Volume Header--
                 drwxr-xr-x root/root         0 2005-02-09 10:34:10 1/
                 -rw-r--r-- root/root  20971520 2005-02-09 10:34:11 1/disk-image


       Step 8: Reading tape data with dd. Most of the time a high "ibs" input block size

                $ mt -f /dev/nst0 rewind
                $ dd if=/dev/nst0 of=outfromdd.tar ibs=64k
                 321+0 records in
                 41088+0 records out


       Step 9: Verify that outfromdd.tar can be read by tar with blocking-factor=128

                $ tar -tvf outfromdd.tar --blocking-factor=128
                 V--------- 0/0               0 2005-02-09 10:38:20 Test 1--Volume Header--
                 drwxr-xr-x root/root         0 2005-02-09 10:34:10 1/
                 -rw-r--r-- root/root  20971520 2005-02-09 10:34:11 1/disk-image


       PULLING FILES:  The dd command can be used to pull files.

              ssh target_address dd if=remotefile | dd of=localfile

           Or, a specific example of getting a file from a computer called hamlet.

              $ ssh root@hamlet  dd if=/home/cvs/test | dd of=/home/storage/test


        GOING BACKWARD AND FORWARD ON TAPE:

             Go to end of data
              $ mt -f /dev/nst0  eod

             Previous record
              $ mt -f /dev/nst0  bsfm 1

             Forward record
              $ mt -f /dev/nst0  fsf 1

             Rewind
              $ mt -f /dev/nst0 rewind

             Tell
              $ mt -f /dev/nst0 tell

         (Reference TIP 151 - for how to get around firewalls)

         Below is a script that I use to backup computers via ssh. The
         tape drive is on "nis" and the extra space is on "hamlet".

                #!/bin/bash
                # Program to backup server remotely
                # Assume remote server is nis, you are on squeezel
                #
                # Recover from tape
                #
                #   dd if=/dev/nst0 of=test.tar.gz bs=64k
                #
                filename="support1.$(date "+%m%d%y%H%M").tar.gz"
                DIRTOBACKUP=/var/www
                #tar cvzf - $DIRTOBACKUP | ssh  root@nis  '(mt -f /dev/nst0 rewind; dd of=/dev/nst0 bs=64k )'
                tar cvzf - $DIRTOBACKUP | ssh  support1@hamlet "dd of=/home/support1/backups/${filename} "

         Another example program, below, pushes the last ".tar.gz" file to tape:

                #!/bin/bash
                # Program to push files to tape
                #
                #
                # Notes on recovering from tape
                #
                #   dd if=/dev/nst0 of=test.tar.gz ibs=64k
                #    or
                #  $ ssh root@tapeserver "mt -f /dev/nst0 rewind"
                #  $ ssh root@tapeserver "dd if=/dev/nst0 ibs=64k"|dd of=cvs1.tar.gz
                #
                #
                #
                # First rewind tape
                ssh root@tapeserver 'mt -f /dev/nst0 rewind'
                #
                # Grab only the last file
                file=$(find /home/cvs  -iname 'cvs*.tar.gz'|sort|tail -n 1)
                dd if=${file}|ssh root@tapeserver 'dd of=/dev/nst0 bs=64k'



TIP 137:

        Apache - redirecting pages. All changes are in httpd.conf

               RedirectMatch (.*)\.gif$ http://www.anotherserver.com$1.jpg

               Redirect /service http://foo2.bar.com/service



TIP 138:

        samba mounts via ssh - mounting a samba share through an ssh tunnel, going
               through an intermediate computer, that accepts ssh. We'll call this
               intermediate computer middle [65.219.4.23], and we want to get to
               destination [192.168.0.81]. The user will be mchirico.

          STEP 1:

               $ mkdir -p /samba/share

          STEP 2:

            This has to be done as root, since we are using a lower port.

               $ ssh -N -L 139:192.168.0.81:139 mchirico@65.219.4.23

          STEP 3:

              umount /samba/sales
              /bin/mount -t smbfs -o  username=donkey,workgroup=donkeydomain,
                      password=passw0rk1,port=139,dmask=770,fmask=660,
                      netbiosname=homecpu //localhost/share /samba/share




TIP 139:

        Music on Fedora Core -- How to play music on http://magnatune.com with "xmms".

           The following command will show the sound driver:

              $ lspci|grep -i audio


          STEP 1:

                Unmute amixer with the following command:

              $ amixer set Master 100% unmute
              $ amixer set PCM 100%  unmute

                Note you can also get a graphical interface with "alsamixer"

              $ alsamixer

                 h,F1   -- for help
                 Esc    -- exit
                 Tab    -- move to selections


          STEP 2:

                Test a sound file "*.au" with aplay. To quickly find files on your system use
                the "locate *.au" command.

                  $ aplay /usr/lib/python2.3/test/audiotest.au

          STEP 3:

                Install "xmms-mp3-1.2.10-9.2.1.fc3.rf.i386.rpm" which does not come with Fedora because
                of GPL license restrictions.  The latest version of this package can be found
                at the following url:

                  http://rpmseek.com/rpm-pl/xmms-mp3.html


                  $ rpm -ivh xmms-mp3-1.2.10-9.2.1.fc3.rf.i386.rpm

          STEP 4:

                Go to magnatun "http://magnatune.com/", select genre and make sure xmms
                is the default player.



TIP 140:

        Routing -- getting access to a network 1 hop away. You are currently on the 192 network
                   and you want access to the 172.21.0.0 network that has a computer straddling
                   the two, with /proc/sys/net/ipv4/ip_forward set to 1.


               $ route add -net 172.21.0.0 netmask 255.255.255.0 gw 192.168.0.204

         To undo:

               $ route del -net 172.21.0.0 netmask 255.255.255.0 gw 192.168.0.204

         Now you can ping 172.21.0.21.

         Does not work?

         Go on to 192.168.0.204 and execute the following commands:

               $ echo 1 > /proc/sys/net/ipv4/ip_forward
               $ cat /proc/sys/net/ipv4/ip_forward
               1

         To Look at the the gateway, execute the following command.

               $ netstat -r

         References: 

               http://lartc.org/lartc.html



TIP 141:

        RAM disk -- creating a filesystem in RAM.

               $ mkfs -t ext3 -q /dev/ram1 4096
               $ mkdir -p /fsram
               $ mount /dev/ram1 /fsram -o defaults,rw



TIP 142:

        Create a Live Linux CDROM  using  BusyBox and OpenSSH.

            These steps are rather long. A complete tutorial is given at
            the following link:
             http://prdownloads.sourceforge.net/souptonuts/instructions_boot_system.txt



TIP 143:

      SystemImager (http://www.systemimager.org/) SystemImager is software that automates Linux installs,
                       software distribution, and production deployment.




TIP 144:

      Mounted a filesystem in rescue mode, yet, you cannot read and write?  Remount.

             $ mount -o remount /



TIP 145:

      Nmap commands to check for Microsoft VPN connection.

         $ nmap -sO -p 47 vpn1.someserver.com
         $ nmap -sS -p T:1723 vpn1.someserver.com

      By the way, with nmap you can specify multiple ports. Below
      is an example of multiple ports; but, use the commands above
      for Microsoft VPN services.

         $ nmap -sS -p T:1723-3000



TIP 146:

      Perl and ssh - monitoring systems. The output from ssh can be parsed. Below is
      a simple procedure to just to read the ssh ouput into perl.

          #!/usr/bin/perl
          #
          $pid = open $readme, "ssh root\@hamlet df -lh|" or die "Could not ssh\n";
          while(<$readme>) {
           print $_
          }
          close $readme

      But note, you probably want to do something more complex. Below is a more robust
      example that bypassed all the fortune, heading junk that you may encounter when
      logging in.

          #!/usr/bin/perl
          #
          $pid = open $readme, "ssh root\@hamlet df -lh 2>/dev/null|" or die "Could not ssh\n";
          while(<$readme>) {
           print $_
          }
          close $readme

      NO! you CANNOT do bidirectional communication with the open statement. Note the "|" before
      and after below, which cannot be done.

          # Cannot do this!
          $pid = open $readme, "|ssh root\@hamlet df -lh 2>/dev/null|" or die "Could not ssh\n";

      Below is a simple Perl example working with arrays:

          #!/usr/bin/perl
          @ArrayOfArray = (
                   [ "ant", "bee" ],
                   [ "mouse", "mole", "rat" ],
                   [ "duck", "goose", "flamingo" ],
                   [  "rose","carnation","sunflower"],
                  );

          for $i ( 0 .. $#ArrayOfArray ) {
              for $j ( 0 .. $#{$ArrayOfArray[$i]} ) {
                  print "Element $i $j is $ArrayOfArray[$i][$j]\n";
              }
          }

          # Or this is another way to list elements
          foreach( @ArrayOfArray ) {
             foreach $i (0..$#$_) {
                print "$_->[$i] "
                }
             print "\n";
          }


      Below is an example of working with Hash of Arrays:

          #!/usr/bin/perl
          #  ./program < /etc/passwd
          while(<>){
              next unless s/^(.*?):\s*//;
              $HoA{$1} = [ split(/:/) ];
          }
          for $i (keys %HoA ) {
              print "$i: @{ $HoA{$i} } \n";
          }

      Example of regular expression. This is my most used regular expression - I like
      this sample. See the "www.unix.org.ua" link at the end of this tip.

          "hot cross buns" =~ /cross/;
          print "Matched: <$`> $& <$'>\n";    # Matched: <hot > cross < buns>
          print "Left:    <$`>\n";            # Left:    <hot >
          print "Match:   <$&>\n";            # Match:   <cross>
          print "Right:   <$'>\n";            # Right:   < buns>


      If you're looking for Perl information, type "man perl", which will show you how
      to get even more information. Or better yet, take a look at the following
      link:

          http://www.unix.org.ua/orelly/perl/prog3/ch09_01.htm
               also
          http://www.stonehenge.com/merlyn/UnixReview/

      For a quick example on using Perl with SQLite, see the following links:

          http://prdownloads.sourceforge.net/souptonuts/README_sqlite_tutorial.html?download
            or
          http://freshmeat.net/articles/view/1428/
            or
          http://www.perl.com/pub/a/1999/09/refererents.html

      Standard input for files. This example will read from stdin, or open a file if given as
      an argument, and convert all "<" to "<" and ">" to ">", which can be handy when
      converting text files to html files. Note the "while(<>)" will take multiple file names
      on the command line.

          #!/usr/bin/perl
          while(<>) {
             s/&/&amp;/g;
             s/</&lt;/g;
             s/>/&gt;/g;
             s/</</g;
             s/>/>/g;
             print;
          }

      Perl Debugger is very useful for testing commands and works like an interpreter, just
      like python. So to get into the Perl Debugger execute the command below, "q" to quit.

          $ perl -de 0

      Reference TIP 170



TIP 147:

      Shutdown

          # shutdown 8:00 -- Shutdown at 8:00

          # shutdown +13  -- Shutdown after 13min

          # shutdown -r now  -- Shutdown now and restart

          # shutdown -k +2  -- "The system is going DOWN to maintenance mode in 2 minutes!"
                              The above is only a warning.

          # shutdown -h now   -- Shutdown now and halt

          # shutdown -c    -- Cancel shutdown



TIP 148:

      ac -  print statistics about users connect time

          $ ac -p    -- print hour usage by user (individual)
          $ ac -dy   -- print daily usage

       Options can also be combined

          $ ac -dyp



TIP 149:

      Smart Monitoring Tools:
      Disk failing? Or want to know the temperature of your hard-drive?

         http://smartmontools.sourceforge.net/

      For a good, quick tutorial, see the Linux Journal article
        http://www.linuxjournal.com/article/6983

      Below are some common commands:

          $ smartctl -i /dev/hda

          $ smartctl -Hc /dev/hda

          $ smartctl -A /dev/hda



TIP 150:

      Monitor dhcp trafic - dhcpdump and tcpdump.

      Download dhcpdump

         $ wget  http://voxel.dl.sourceforge.net/sourceforge/mavetju/dhcpdump-1.5.tar.gz
         $ ./configure
         $ make && make install

     Once it's installed, you can monitor all dhcp traffic as follows, if done with root.

         $ tcpdump -lenx -i eth0 -s 1500 port bootps or port bootpc| dhcpdump

     The above assumes you are using eth0 (ethernet port 0).



TIP 151:

      Breaking Firewalls with ssh


      A sample .ssh/config file (note this must have chmod 600 rights)

           ## Server1 ##
           Host 130.21.19.227
               LocalForward 20000 192.168.0.66:80
               LocalForward 22000 192.168.0.66:22

      With the above "~/.ssh/config" file, after sshing into 130.21.19.227 it
      is then possible to ssh into nearby computers directly.

         $ ssh -l mchirico 130.21.19.227
         $ scp -P 22000 authorized_keys* mchirico@localhost:.
         $ ssh -l mchirico localhost -p 22000

      For the complete article reference the following link:
        http://souptonuts.sourceforge.net/sshtips.htm



TIP 152:

      Renaming files - suppose you want to rename all the ".htm" files to ".html"

          $ rename .htm .html *.htm

      Or, suppose you files file1, file2, file3 ...

          $ touch file1 file2 file3 file4 file5 file6
          $ rename file file. file*

      The above command will give you "file.1", "file.2" ... "file.6"



TIP 153:

      Renaming files with Perl - this is taken from "Programming Perl 3rd Edition"

          #!/usr/bin/perl
          # rename - change filenames
          $op = shift;
          for (@ARGV) {
              $was = $_;
              eval $op;
              die if $@;
              # next line calls built-in function, not the script
              rename($was,$_) unless $was eq $_;
           }

      The above Perl program can be used as follows:

           $ rename 's/\.orig$//'    *.orig
           $ rename 'y/A-Z/a-z/ unless /^Make/' *

      Also reference:
           http://www.unix.org.ua/orelly/perl/prog3/



TIP 154:

      R project (http://www.r-project.org)

      To start R, just type "R" at the command prompt and "q()" to quit. Below
      2 is raised to powers 0 through 6 and thrown into an array.

           $ R
           > N <- 2^(0:6)
           > N
           [1]  1  2  4  8 16 32 64
           >

      There is a summary summary() command.

           > summary(N)
           Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
           1.00    3.00    8.00   18.14   24.00   64.00

      Note that the array begins as 1 and not 0

           > N[1:3]
           [1] 1 2 4



TIP 155:

      ls - listing files by size, with the biggest file listed last


           $ ls --sort=size -lhr

      The above command sorts files by size, listing the contents in
      "h" human readable format in reverse order.

      Note the options:  --sort={none,time,size,extension}



TIP 156:

     Perl - program to clean up old versions of files

       #!/usr/bin/perl
       #   Copyright (c) GPL 2005 Mike Chirico
       # This program deletes old files from several directories
       # and within each directory there must be x number of copies
       # each y number of bytes
       #

       sub delete_old_ones {
           $directory_and_file=$_[0];
           $save_count=$_[1];
           $bytes_in_file=$_[2];
         # Don't change setting here of '-lt'
           $pid = open $readme, "ls -lt $directory_and_file|" or die "Could not execute\n";
           while(<$readme>) {
               my @fields = split;
              # Make sure we have $save_count good ones with data
               if ($fields[4] > $bytes_in_file && $save_count > 0) {
                   $save_count--;
                   print "Kept files: $fields[4] $fields[8]\n";
               }
              # delete the old ones
              if ($save_count <= 0 )
              {
                  print "Deleted files: $fields[4] $fields[8]\n";
                  unlink $fields[8];
              }
           }
           close $readme;
       }


       @AofA = (
          [ "/home/cvs/backups/*.gz", "6",196621 ],
          [ "/home/mail/backups/*.gz","5",34 ],
          [ "/home/snort/backups/*.gz","2",34 ],
          [ "/home/server1/backups/*.gz","2",34 ],
          [ "/home/actserver/backups/*.gz","2",34 ],
          [ "/home/server2/backups/*.gz","2",34 ],
                );


       foreach( @AofA ) {
           &delete_old_ones($_->[0],$_->[1],$_->[2]);
       }

     Reference TIP 170 and the following link:
       http://www.unix.org.ua/orelly/perl/prog3/



TIP 157:

     Graphics and Visualization Software that runs on Linux
        http://www.tldp.org/HOWTO/Scientific-Computing-with-GNU-Linux/graphvis.html



TIP 158:

     Keeping files in sync going both ways. Unlike rsync, this is not a one way mirror
     option.

     You will need ocaml installed first.

       $ wget http://caml.inria.fr/pub/distrib/ocaml-3.08/ocaml-3.08.3.tar.gz
       $ tar -xzf ocaml-3.08.3.tar.gz
       $ cd ocaml-3.08.3

       $ ./configure
       $ make world
       $ make opt
       $ make install

     Next, get unison and put it in a different directory.
     [http://www.cis.upenn.edu/~bcpierce/unison/]

       $ wget http://www.cis.upenn.edu/~bcpierce/unison/download/stable/latest/unison-2.10.2.tar.gz
       $ tar -xzf unison-2.10.2.tar.gz
       $ cd unison-2.10.2
       $ make UISTYLE=text
       $ su
       # cp unison /usr/local/bin/.

     Note, you have to copy the file manually.

     See the following article [http://www.linuxjournal.com/article/7712]



TIP 159:

     Dump ext2/ext3 filesystem information with "dumpe2fs". Perform the mount command
     and query away.

       $ dumpe2fs /dev/sda1



TIP 160:

     sysreport - a script that generates an HTML report on the system configuration. It
     gathers information about the hardware and is somewhat redhat specific. The utility
     should be run as root.

       $ /usr/sbin/sysreport



TIP 161:

     Key Bindings Using bind.  You can bind, say, ctl-t to a command.

     Add the following to you "~/.inputrc" file, just as it is typed below with quotes.

           "\C-t": ls -l

     Next, run the command

           $ bind -f .inputrc

     Or, you can do everything on the command line; however, it won't be there the next time
     you log in. Below is the way to do everything on the command line.

           $ bind -x '"\C-t":ls -l'

     To unbind use the "-r" option. Single quotes are not needed.

           $ bind -r "\C-t"

     Getting a list of all bindings can be done as follows, and not this can be redirected
     to the ".inputrc" file for further editing.

           $ bind -p > .inputrc



TIP 162:

     awk - common awk commands.

     Find device names "sd" or with major number 4 and device name "tty". Print the
     record number NR, plus the major number and minor number.

          $ awk '$2 == "sd"||$1 == 4 && $2 == "tty" { print NR,$1,$2}' /proc/devices

     Find device name equal to "sound".

          $ awk '/sound/{print NR,$1,$2}' /proc/devices

     Print the 5th record, first field, in file test

          $ awk 'NR==5{print $1}' test

     Print a record, skip 4 records, print a record etc from file1

          $ awk '(NR-1) % 4 == 0 {print $1}' file1

     Print all records except the last one from file1

          $ tac file1|awk 'NR > 1 {print $0}'|tac

     Print A,B,C ..Z on each line, cycling back to A if greater than 26 lines

          $ awk '{ print substr("ABCDEFGHIJKLMNOPQRSTUVWXYZ",(NR-1)%26+1,1),$0}' file1

     Number of bytes in a directory.

          $ ls -l|awk 'BEGIN{ c=0}{ c+=$5} END{ print c}'



TIP 163:

     Configuring Remote Logging.  If you have several servers on 192.168.1.0, you can setup remote logging
     as follows.

     MAIN LOG SERVER (192.168.1.81):

        Firewall - allow UDP port 514 on the main server that will receive the logs.

          $ iptables -A INPUT -p udp -s 192.168.1.0/24  --dport 514 -j ACCEPT

        Edit "/etc/sysconfig/syslog" and add the "-r" option to SYSLOGD_OPTIONS as shown below.

          SYSLOGD_OPTIONS="-r -m -0"

        Note, the "-r" is to allow remote logging and  "-m 0" specifies that that the syslog process should
        not write regular timestamps.  I prefer to only write timestamps for the clients.

        Next, restart the logging process

          $ service syslog restart

     CLIENT LOG SERVER:

        Edit "/etc/syslog.conf" and add the ip address of the log server, or put in the hostname.

            *.* @192.168.1.81

        Next, restart the logging process

          $ service syslog restart



TIP 164:

     kudzu - hardware on your system. To probe the hardware on your system without doing
             anything, issue the following command.

          $ kudzu -p

      But wait, a lot of this information is already recorded in the following file

            /etc/sysconfig/hwconf

      You can also use lspci to list all PCI devices.

          $ lspci

      Also, take a look at the script /etc/sbin/sysreport, since this script has a lot of
      info gathering commands. You can pick and choose what you want, or run the complete
      report.

      If you just want information on the NIC

          $ ip link show eth0
          2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
          link/ether 00:11:11:8a:be:3f brd ff:ff:ff:ff:ff:ff





TIP 165:

     cfengine - a very power agent for monitoring and administrating both a single computer
              and or multiple computers. [ http://www.cfengine.org/ ]

     The following is a quick example on downloading and installing cfengine.

          $ ncftpget ftp://ftp.iu.hio.no/pub/cfengine/cfengine-2.1.15.tar.gz
          $ md5sum cfengine-2.1.15.tar.gz
          f03de82709f84c3d6d916b6e557321f9  cfengine-2.1.15.tar.gz

          $ tar -xzf cfengine-2.1.15.tar.gz


     You need to have a current version of BerkeleyDB (http://downloads.sleepycat.com/db-4.3.28.tar.gz).
     Note that BerkeleyDB has a funny install. You cd to the "build_unix" directory, then,

          Installing BerkeleyDB if needed:
                 $ wget http://downloads.sleepycat.com/db-4.3.28.tar.gz
                 $ tar -xzf db-4.3.28.tar.gz
                 $ cd db-4.3.28/build_unix/
                 $ ../dist/configure
                 make
                 make install

     You also need a current version of OpenSSL. For instructions on how to install OpenSSL see
     (http://souptonuts.sourceforge.net/postfix_tutorial.html).

     See (TIP 49) on putting "/usr/local/BerkeleyDB.4.3/lib" in the "/etc/ld.so.conf" file. Or
     once BerkeleyDB is installed, you can put the location on the command line as follows:

     Configuring cfengine with direct reference to BerkeleyDB.4.3.  First cd to the cfengine source.

          $ ./configure --with-berkeleydb=/usr/local/BerkeleyDB.4.3/lib
          $ make
          $ make install

     Next create the following directories:

          $ mkdir -p /var/cfengine/bin
          $ mkdir -p /var/cfengine/inputs

     Copy needed files (cfagent, cfdoc, cfenvd, cfenvgraph, cfexecd, cfkey, cfrun, cfservd, cfshow):

          $ cp /usr/local/sbin/cf* /var/cfengine/bin


     You'll also need to generate keys. As root, execute the following:

          $ cfkey

     The command above will write the public and private keys in
     "/var/cfengine/ppkeys".


     You probably want (cfexecd, cfservd, and cfenvd) running on all servers. If you
     add the following to "/etc/rc.local" these daemons will start on reboot.

           # Lines in /etc/rc.local
           /usr/local/sbin/cfexecd
           /usr/local/sbin/cfservd
           /usr/local/sbin/cfenvd

     Also, make sure you run each command now as follows:

          $ /usr/local/sbin/cfexecd
          $ /usr/local/sbin/cfservd
          $ /usr/local/sbin/cfenvd

     Firewall settings must be adjusted to allows 5308 for tcp/udp. My local network
     is 192.168.1.0, so I'm opening it up for all my computers.

          $ iptables -A INPUT -p udp -s 192.168.1.0/24  --dport 5308 -j ACCEPT
          $ iptables -A INPUT -p tcp -s 192.168.1.0/24  --dport 5308 -j ACCEPT

     A set of keys needs to be on the server and hosts. For example, my key on "tape.squeezel.com"
     should be copied over to the server "squeezel.squeezel.com" as follows:

     This is done from tape.squeezel.com

          $ scp /var/cfengine/ppkeys/localhost.pub  root@squeezel.squeezel.com:/var/cfengine/ppkeys/root-tape.squeezel.com.pub
          $ scp root@squeezel.squeezel.com:/var/cfengine/ppkeys/localhost.pub /var/cfengine/ppkeys/root-squeezel.squeezel.com.pub

     Also, "/var/cfengine/inputs/cfrun.hosts" on the server "squeezel.squeezel.com" must contain
     all the computers that will get updated. This is "cfrun.hosts" on "squeezel.squeezel.com"

          closet.squeezel.com
          tape.squeezel.com

     Once I'm done, from "tape.squeezel.com" I can run the following test:

          $ cfrun squeezel.squeezel.com -v




TIP 166:

     cfengine - a quick example. This example will be run as root. You create the file "cfagent.conf" in
     "/var/cfengine/inputs/". The example below will checksum all the files in /home/chirico/deleteme/tripwire,
     it will also comment out the line "finger" in any file located in /tmp/testdir/stuff, also appending
     the command in this file " Edit change with cfengine".

          # /var/cfengine/inputs/cfagent.conf
          #
          # You run this with the following:
          #   cfagent -vK
        
          control:
                 actionsequence = ( files tidy editfiles )
                 ChecksumDatabase = ( /var/cfengine/cache.db )
                 # Below, true to update md5
                 ChecksumUpdates = ( true )
        
        
          files:
                 /home/chirico/deleteme/tripwire checksum=md5 recurse=inf
                 /home/chirico/deleteme/tripwire/moredata checksum=md5 recurse=inf
                 #/home/chirico/deleteme/tripwire/compress  recurse=inf include=*.txt acti on=compress
                   # If the database isn't secure, nothing is secure...
                 /var/cfengine/cache.db  mode=600 owner=root action=fixall
        
          tidy:
                 /home/chirico/deleteme/tripwire pattern=*~ recurse=inf age=0
                 # You must put an age. 0 runs now.

        
          editfiles:
        
                {  /tmp/testdir/stuff

                   HashCommentLinesContaining "finger"
                   AppendIfNoSuchLine "# Edit Change with cfengine "
                }


     A few further notes on the above. The command "actionsequence = ( files tidy editfiles) tells the order
     of what to execute. The heading "tidy:" deletes files, and of course, "editfiles" does the editing of files.

     To run the example, execute the following command. The  "-K" causes the lock file to be ignored.

            $ cfagent -vK




TIP 167:

     Implementing Disk Quotas - a quick example that can easily be done on a live system for testing. There
     is no need to reboot, since you'll be creating a virtual filesystem.

     Do the following as root. First create a mount point.

            # mkdir -p /quota

     Next, create 20M file. Since I have many of these files, I created a special directory "/usr/disk-img"

            # mkdir -p /usr/disk-img
            # dd if=/dev/zero of=/usr/disk-img/disk-quota.ext3 count=40960

     The dd command above create a 20 MB file because, by default, dd uses a block size of 512 bytes. That makes
     the size: 40960*512=20971520.

     Next, format this as an ext3 filesystem

            # /sbin/mkfs -t ext3 -q /usr/disk-img/disk-quota.ext3 -F

     Add the following line to "/etc/fstab"

            /usr/disk-img/disk-quota.ext3    /quota ext3    rw,loop,usrquota,grpquota  0 0

     Now, mount this filesystem

            # mount /quota

     Take a look at it:

            # ls -l /quota
            lost+found

     Now, run "quotacheck"

            # quotacheck -vug /quota

     You'll get errors the first time this is run, because you have no quota files.
     But, run it a second time and you'll see something similiar to the following:

            # quotacheck -vug /quota
            quotacheck: Scanning /dev/loop2 [/quota] done
            quotacheck: Checked 3 directories and 4 files

     Now take a look at the files:

            # ls -l /quota
            total 26
            -rw-------  1 root root  6144 Jun 14 12:23 aquota.group
            -rw-------  1 root root  6144 Jun 14 12:23 aquota.user
            drwx------  2 root root 12288 Jun 14 12:18 lost+found

     Next use "edquota" to grant the user "chirico" a certain quota

            # edquota -f /quota chirico

     This will bring up a menu, and here I have edited so that user "chirico"
     has a soft limit of 120*512=61K, and a soft limit of 2 inodes and a hard limit of 5.

             Disk quotas for user chirico (uid 500):
             Filesystem                   blocks       soft       hard     inodes     soft     hard
             /dev/loop2                        2        120        150         1        2         3

     Next, turn quotas on with the following command:

             $ quotaon /quota

     If you need to turn off quotas, the command is "quotaoff -a" for all filesystems. You'll run into
     errors if you try to run quotacheck, say "quotacheck -avug" because this tries to unmount and mount
     the filesystem. You need to turn off quotas first "quotaoff /quota". Note you only need to run
     quotacheck once, or when doing maintenance after a system crash.


      To get a report on the quote, runn "repquota" as follows:

           $ repquota /quota
            *** Report for user quotas on device /dev/loop0
            Block grace time: 7days; Inode grace time: 7days
                                    Block limits                File limits
            User            used    soft    hard  grace    used  soft  hard  grace
            ----------------------------------------------------------------------
            root      --    1189       0       0              2     0     0
            chirico   -+      93       0       0              4     2     5  6days


      Note above that user "chirico" has used 4 on the file limits. This user has a hard
      limit of 5. So when this user tries to create 2 more files (bring this over the limit of 5)
      then he will get the following error as demonstrated below.


           [chirico@squeezel chirico]$ touch one
           [chirico@squeezel chirico]$ touch two
           loop0: write failed, user file limit reached.
           touch: cannot touch `two': Disk quota exceeded


      Now, if repquota (run by root) is executed it shows the following:

           $ repquota /quota
           *** Report for user quotas on device /dev/loop0
           Block grace time: 7days; Inode grace time: 7days
                                   Block limits                File limits
           User            used    soft    hard  grace    used  soft  hard  grace
           ----------------------------------------------------------------------
           root      --    1189       0       0              2     0     0
           chirico   -+      94       0       0              5     2     5  6days


      Note the "+" sign above. User "chirico" is above the File soft limits, and in this case
      above the hard limits.

      To warn user by sending email to them, run "warnquota", but you need check that
      "/etc/warnquota.conf" is setup correctly. For the example above, this file should
      look as follows:

            $ cat /etc/quotatab
            #
            #  This is sample quotatab (/etc/quotatab)
            #  Here you can specify description of each device for user
            #
            #  Comments begin with hash in the beginning of the line

            # Example of description
            /dev/loop0: This is loopback device

      Just run the following as root:

            $ warnquota

      By the way, if you want to change the grace period, it can only be done on a filesystem
      basis. Not per user.

            $  edquota -t

      Users can run "quota" to see their usage as follows:

            [chirico@squeezel ~]$ quota
            Disk quotas for user chirico (uid 500):
                 Filesystem  blocks   quota   limit   grace   files   quota   limit   grace
                 /dev/loop0      94       0       0               5      10      50

      As you can see from above, I changed my inode limit to 50.

      What about running this on the whole filesystem? Yes, below is an example where I'm running
      this on FC3, on the root of the filesystem "/". This assumes that you have installed the
      quota package. Try doing "rpm -q quota" to see if this package is installed.

        Step 1:

           Check to make sure the quota software is installed. You can either do a "whereis quota",
           or check for the rpm package.

             $ whereis quota
             whereis quota
             quota: /usr/bin/quota /usr/share/man/man1/quota.1.gz

           Checking for the rpm package.

            $ rpm -q quota
            quota-3.12-5

        Step 2:

           Edit /etc/fstab and add usrquota and grpquota options for "/dev/VolGroup00/LogVol00",
           which is shown on the first line below:

             /dev/VolGroup00/LogVol00 /                      ext3    defaults,usrquota,grpquota        1 1
             LABEL=/boot             /boot                   ext3    defaults        1 2
             none                    /dev/pts                devpts  gid=5,mode=620  0 0
             none                    /dev/shm                tmpfs   defaults        0 0
             none                    /proc                   proc    defaults        0 0
             none                    /sys                    sysfs   defaults        0 0
             /dev/VolGroup00/LogVol01 swap                    swap    defaults        0 0

        Step 3:

           Remount the filesystem as follows:

             $ mount -o remount /

        Step 4:

           Run quotacheck with the "-m" option. Like the above statement, this will have to be run with
           root priviliges. This creates the quota database files, and it can take a long time if it is
           a large full filesystem.


             $ quotacheck -cugm /

        Step 5:

           This step is optional, but it's good to know if you need to recalculate quotas because of a
           system crash. It's demonstrated here, because at this point quota's have not been turned on.
           Again, note the "m" option below.

             $ quotacheck -avumg

        Step 6:

           Set limits for specific users or groups using the "edquota" command. Shown below is the command
           to setup quotas for user "chirico". Shown below this user has used 161560 blocks, he has a soft
           limit of 1161560 and a hard limit of 900000. He has used 3085 inodes and has a soft limit of 10000
           and a hard limit of 12000.

             $ edquota -f / chirico

             Disk quotas for user chirico (uid 500):
               Filesystem                   blocks       soft       hard     inodes     soft     hard
               /dev/mapper/VolGroup00-LogVol00     161560    1161560     900000       3085    10000    12000

           You can put quotas on groups as well. The following is done as root. See (TIP 186 and TIP 6) for creating
           groups and adding users to groups.

             $ edquota -g share

           If you create a sharable directory for anyone in the group "share" (TIP 6), quota restrictions against
           group "share" will only apply to files added in the "/home/share" directory. When user "chirico" creates
           files in "/home/share" they also go against this user quota as well. However, when files are created in
           his home directory they do not go against the "share" group.

           Note - if you get errors when trying to run "edquota -g share", turn quotas off "quotaoff /" and
                  run "quotacheck -avugm". Then, turn the quotas back on "quotaon /".

           You can see the status of the group quota with the following command:

             $ quota -g share

        Step 7:

           Turn on quotas with the "qutoaon" command. This command needs to be done with root privileges.

             $ quotaon /

        Step 8:

           Check "/etc/quotatab" file for the correct entries. Note that when you do the "mount" command
           the filesystem returned needs to match what is in the "quotatab" file. I have noticed that this
           is not the case by default.

             $ mount
             /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw,usrquota,grpquota)

           So the "/etc/quotatab" must contain the following line.

             /dev/mapper/VolGroup00-LogVol00: This is the Volume group

        Step 9:

           Run "warnquota" as a check that the "/etc/quotatab" files is setup correctly.

              $ warnquota

        Step 10:

           Setup a daily cron job for running "warnquota". The following should be placed
           in "/etc/cron.daily"

              #!/bin/sh
              # Place this file in /etc/cron.daily
              # with rights 0755
              /usr/sbin/warnquota
              EXITVALUE=$?
              if [ $EXITVALUE != 0 ]; then
                 /usr/bin/logger -t warnquota "ALERT exited abnormally with [$EXITVALUE]"
              fi
              exit 0

      References:
        http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/sysadmin-guide/ch-disk-quotas.html
        (TIP 6, TIP 186, and TIP 205)



TIP 168:

     rdist - remote file distribution client program. You can use this program in combination with
     ssh. This program does more than just copy files. Once a file has been copied, you can dictate
     other actions to be performed. Or you can hold off copying all together if the destination is
     running low on inodes, or disk space.

     For the purpose of this example, all commands will been run on "squeezel.squeezel.com", and the
     computers that will be updated are "tape.squeezel.com" and "closet.squeezel.com". Obviously, you
     would substitute your computer names.

     It helps to setup ssh keys on each computer first. Reference [http://souptonuts.sourceforge.net/sshtips.htm]
     and (TIP 12).

     Step 1: Create the Configuration file myDistfile

       Below is my sample "myDistfile". This file will access hosts "tape.squeezel.com" using username chirico
       and "closet.squeezel.com" with the username running this command, and copy the
       files "/home/chirico/file1" and "/home/chirico/file2" to the these two servers creating the
       directory ~/tmpdir if it doesn't exist. Once these files are updated, a mail check ("sendmail -bv")
       will be performed, and mail will be sent to "chirico@squeezel". This happens twice, once for each file.

       Note, the line "/home/chirico/file2 -> tape.squeezel.com" which moves the file "file2" to
       tape.squeezel.com renaming the file to "tapedest" in the directory "/home/chirico". Once this file
       is copied, the rights are modified to "chmod +r".  Likewise, "/home/chirico/file2 -> closet.squeezel.com"
       copies the file file2, which is renamed as closetdest.

                 # Contents of myDistfile
                 HOSTS = ( chirico@tape.squeezel.com closet.squeezel.com )

                 FILES = ( /home/chirico/file1 /home/chirico/file2 )

                 ${FILES} -> ${HOSTS}
                    # Directory tmpdir will be created if it doesn't exist
                    install tmpdir ;
                    special /home/chirico/file1  "/usr/sbin/sendmail -bv mchirico@gmail.com";
                    notify chirico@squeezel;

                 /home/chirico/file2 -> tape.squeezel.com
                    install  /home/chirico/tapedest;
                    special  /home/chirico/tapedest "chmod +r /home/chirico/tapedest";

                 /home/chirico/file2 -> closet.squeezel.com
                    install /home/chirico/closetdest;


     Step 2: Command from squeezel.squeezel.com to run myDistfile above

       Below is the command that will execute the contents in "myDistfile". This command is run from the
       computer "squeezel.squeezel.com". All output will go in the file "cmd1rdist.log".

           $ rdist -P /usr/local/bin/ssh -f ./myDistfile -l file=./cmd1rdist.log=all

       Obviously you want a secure copy (using scp), so the -P option uses ssh as your secure
       transport mechanism.



TIP 169:

     Restricting root logins (/etc/securetty). ctl-alt-F4 will give you a prompt for tty3. Note
     that it is one number less. Take a look at the contents of "/etc/securetty". To prevent
     root from logging in on this device, take out tty3 from this listing. Note, you can always
     login as another user, then, su to root.  Below is an example of the default
     "/etc/securetty" that allows root to login to everything.

         [root@squeezel ~]# cat /etc/securetty
         console
         vc/1
         vc/2
         vc/3
         vc/4
         vc/5
         vc/6
         vc/7
         vc/8
         vc/9
         vc/10
         vc/11
         tty1
         tty2
         tty3
         tty4
         tty5
         tty6
         tty7
         tty8
         tty9
         tty10
         tty11



TIP 170:

     Perl map function. Try the following to get a quick take on this function,
     which increments each value in the array a;

         #!/usr/bin/perl
         @a = (1,2,3);
         map {$_++} @a;
         map { print "$_\n" } @a;

     or

         #!/usr/bin/perl
         @a = (1,2,3);
         map { print "$_\n"} map {++$_} @a;

     And you can easily make modifications, like reversing the order

         #!/usr/bin/perl
         @a = (1,2,3);
         map { print "$_\n"} reverse map {++$_} @a;

     Plus there is a grep() function that works on each element as well

         #!/usr/bin/perl
         @a = (1,2,3);
         map { print "$_\n"} reverse grep{ $_ > 3} map {++$_} @a;

     To get only odd numbers in reverse order:

         #!/usr/bin/perl
         @a = (1,2,3);
         map { print "$_\n"} reverse grep{ !($_ % 2)} map {++$_} @a;


     Reference: http://www-128.ibm.com/developerworks/linux/library/l-road4.html



TIP 171:

     Perl - subroutine call and shifting through variables. A simple and useful
     technique.

          #!/usr/bin/perl
          sub test {
            local $mval;
            while( $mval = shift ) {
              print " $mval\n";
            }
          }

          test("one","two","three");



TIP 172:

     Tcp wrappers - First "/etc/hosts.allow" is check, and if there is an entry in this file, no more
     checking it done.  If are no matches in "/etc/hosts.allow", the "/etc/hosts.deny" file is checked
     and if a match is found, that service is blocked for that host.

     Example "/etc/hosts.deny" file:

         sshd: 192.168.1.171

     The above file blocks access to computer 192.168.1.171. It's also possible to run commands when
     someone from this computer tries to ssh in. This example sends mail.

         sshd: 192.168.1.171: spawn (echo -e "%d %h %H %u"| /bin/mail -s 'hosts.deny entry' root)

     Of course, you can also run commands in the "/etc/hosts.allow" if you wanted mail sent for a successful
     login.



TIP 173:

     pgrep, pkill - look up or signal process based on name and other attributes.

     To quick find all instances of ssh running, for user root, execute the following
     command:

           $ pgrep -u root -l ssh

     To kill a process, or send a signal use the "pkill" option. For example, to
     make syslog reread its configuration file:

           $ pkill -HUP syslogd

     Another command command is "pidof" that can tell you how many processes are running.
     This can be useful for detecting DOS attacks.

           $ pidof sshd
           4783 4781 30008 30006 29888 29886 2246

     Above there are 7 sshd's running. Reference "Tcpdump, Raw Socket and Libpap Tutorial"
     at [http://souptonuts.sourceforge.net/tcpdump_tutorial.html].



TIP 174:

     Password Cracking - tools to check your users passwords:

      John The Ripper
        http://www.openwall.com/john/

      Crack
        http://www.crypticide.com/users/alecm/

      Slurpie
        http://www.ussrback.com/distributed.htm



TIP 175:

     Password Aging - setting the number of days a password is valid.

         $ chage -M 90 <username>



TIP 176:

     Kernel Performance Tuning - /Documentation/sysctl/vm.txt documents kernel settings to
     improve performance. Below are some examples.

       overcommit_memory:  0 -- default estimates the amount of memory for malloc
                           1 -- kernel pretends there is always enough memory until it runs out
                           3 -- never overcommit

          $ cat /proc/sys/vm/overcommit_memory
          0

       page-cluster:
            The Linux VM subsystem avoids excessive disk seeks by reading
            multiple pages on a page fault. The number of pages it reads
            is dependent on the amount of memory in your machine.
        
            The number of pages the kernel reads in at once is equal to
            2 ^ page-cluster. Values above 2 ^ 5 don't make much sense
            for swap because we only cluster swap data in 32-page groups.

          $ cat /proc/sys/vm/page-cluster
          3

       min_free_kbytes:
            This is used to force the Linux VM to keep a minimum number
            of kilobytes free.  The VM uses this number to compute a pages_min
            value for each lowmem zone in the system.  Each lowmem zone gets
            a number of reserved free pages based proportionally on its size.

          $ cat /proc/sys/vm/min_free_kbytes
          3831

       max_map_count:
            This file contains the maximum number of memory map areas a process
            may have. Memory map areas are used as a side-effect of calling
            malloc, directly by mmap and mprotect, and also when loading shared
            libraries.

            While most applications need less than a thousand maps, certain
            programs, particularly malloc debuggers, may consume lots of them,
            e.g., up to one or two maps per allocation.

            The default value is 65536.

          $ cat /proc/sys/vm/max_map_count
          65536

        Also see http://people.redhat.com/alikins/system_tuning.html



TIP 177:

     IO Scheduler - /Documentation/block/as-iosched.txt documents kernel settings for disk
     performance.

     If you're not sure what partitions you have "$ cat /proc/partitions". This example
     assumes hda, and you can see some of the kernel settings:

          $ ls /sys/block/hda/queue/iosched
          back_seek_max  back_seek_penalty  clear_elapsed  fifo_batch_expire  fifo_expire_async
           fifo_expire_sync  find_best_crq  key_type  quantum  queued

     References: http://lwn.net/Articles/102505/
                 http://bhhdoa.org.au/pipermail/ck/2004-September/000961.html



TIP 178:

     iozone -- getting data on disk performance (http://www.iozone.org/). This is a very
     comprehensive package.

           $ wget http://www.iozone.org/src/current/iozone3_242.tar
           $ tar -xf iozone3_242.tar
           $ cd iozone3_242/src/current
           $ make linux

     At this point you should read the documentation. There is no "make install". You
     copy it to each filesystem you want to run this program on. Below are some quick
     start commands.

       Good comprehensive test.

           $ iozone -a

       I prefer this for small filesystems. It limits the record size to 10000 and does
       the output in operations per second (higher numbers mean faster drive).

           $ ./iozone -a -s 10000 -O



TIP 179:

     history - bash command to get a history of all commands typed. But, here is a way
     that you can get date and time listed as well.

           $ HISTTIMEFORMAT="%y/%m/%d %T "

     Defining the environment variable above give you the date/time info when you
     execute history:

           $ history
              ...
               175  05/06/30 12:51:46 grep '141.162.' mout > mout2
               176  05/06/30 12:51:48 e mout2
               177  05/06/30 12:56:59 ls
               178  05/06/30 12:57:02 ls
               179  05/06/30 12:57:39 ls
               180  05/06/30 12:57:49 ls -l
               181  05/06/30 13:01:10 history
               182  05/06/30 13:01:20 HISTTIMEFORMAT="%y/%m/%d %T "
               183  05/06/30 13:01:23 history
              ...



TIP 180:

     .config - Fedora Core getting the .config to rebuild the kernel. You can find
     this file, the ".config" file at the following location:

          $ ls "/lib/modules/$(uname -r)/build/.config"

     Or, to see the contents

          $ cat "/lib/modules/$(uname -r)/build/.config"

     This can be important, if you're planning to build your own kernel.



TIP 181:

     Listing control key settings.

          $ stty -a
          speed 38400 baud; rows 0; columns 0; line = 0;
          intr = ^C; quit = ^\; erase = <undef>; kill = <undef>; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q;
          stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
          -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
          -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel
          opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
          isig icanon iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke



TIP 182:

     iptables DNAT and SNAT. You have a webserver on 192.168.1.71. When people query this webserver, you want them
     to goto 192.168.1.81, with no indication that they are going to another web server. In fact, they always make
     their web hits to 192.168.1.71.

     The following is the iptables commands:

        $ echo 1 > /proc/sys/net/ipv4/ip_forward
        $ iptables -t nat -A PREROUTING -d 192.168.1.71 -p tcp --dport 80 -j DNAT --to 192.168.1.81
        $ iptables -t nat -A POSTROUTING -d 192.168.1.81 -s 192.168.1.0/24 -p tcp --dport 80 -j SNAT --to 192.168.1.71

     Change 192.168.1.0/24 to whatever source you expect the web browser to come in on. Below is the tcpdump showing
     all traffic is relayed via 192.168.1.71

         [root@closet iptables]# tcpdump -nN port 80

         17:34:58.790398 IP 192.168.1.102.1158 > 192.168.1.71.80: S 3620106373:3620106373(0) win 16384 <mss 1460,nop,nop,sackOK>
         17:34:58.790465 IP 192.168.1.71.1158 > 192.168.1.81.80: S 3620106373:3620106373(0) win 16384 <mss 1460,nop,nop,sackOK>
         17:34:58.790703 IP 192.168.1.81.80 > 192.168.1.71.1158: S 1973665156:1973665156(0) ack 3620106374 win 5840 <mss 1460,nop,nop,sackOK>
         17:34:58.790720 IP 192.168.1.71.80 > 192.168.1.102.1158: S 1973665156:1973665156(0) ack 3620106374 win 5840 <mss 1460,nop,nop,sackOK>
         17:34:58.790951 IP 192.168.1.102.1158 > 192.168.1.71.80: . ack 1 win 17520
         17:34:58.790965 IP 192.168.1.71.1158 > 192.168.1.81.80: . ack 1 win 17520
         17:34:58.791451 IP 192.168.1.102.1158 > 192.168.1.71.80: P 1:327(326) ack 1 win 17520
         17:34:58.791472 IP 192.168.1.71.1158 > 192.168.1.81.80: P 1:327(326) ack 1 win 17520
         17:34:58.791973 IP 192.168.1.81.80 > 192.168.1.71.1158: . ack 327 win 6432

     Above the web client is on "192.168.1.102". You can see that the 1st server "192.168.1.71" then goes out to
     the 2nd server "192.168.1.81" on the second line. The third line shows the 2nd server "192.168.1.81" responding to
     the 1st server, and the forth line passes this data back to the web client "192.168.1.102".

     Note: You can save your current iptables setting with the following command:

         $ iptables-save > iptables_store

       The big advantage is that you can store the counters as well.

         $ iptables-save -c > iptables_store_w_cnts

       To restore the file, use the following:

         $ iptables-restore -c < iptables_store_w_cnts



TIP 183:

     mailstats - display mail statistics. This file reads data from "/var/log/mail/statistics"

         [root@closet ~]# mailstats
         Statistics from Sat Jun 25 15:59:52 2005
          M   msgsfr  bytes_from   msgsto    bytes_to  msgsrej msgsdis msgsqur  Mailer
          4        1          2K        0          0K        0       0       0  esmtp
          9        0          0K        1          2K        0       0       0  local
         =====================================================================
          T        1          2K        1          2K        0       0       0
          C        1                    0                    0



TIP 184:

     Profiling C Applications - Assume you have the following program p1.c:

         /* Program  p1.c */
         #include <stdio.h>
         #include <stdlib.h>
        
         t1(int i)
         {
                 printf("t1:%d\n", i);
         }
        
         t2(int j)
         {
                 printf("t2:%d\n", j);
         }
        
         int main(void)
         {
                 int i, j;
        
                 for (i = 0; i < 5; ++i) {
                         t1(i);
                         for (j = 0; j < 2; ++j) {
                                 t2(j);
                         }
                 }
         }

     Compile the program as follows:

        $ gcc -pg -g -o p1 p1.c
        $ ./p1
        t1:0
        t2:0
        t2:1
        t1:1
        t2:0
        t2:1
        t1:2
        t2:0
        t2:1
        t1:3
        t2:0
        t2:1
        t1:4
        t2:0
        t2:1

     Next, to get the profile graph.

        $ gprof -p -b p1
        Flat profile:
        
        Each sample counts as 0.01 seconds.
         no time accumulated
        
          %   cumulative   self              self     total
         time   seconds   seconds    calls  Ts/call  Ts/call  name
          0.00      0.00     0.00       10     0.00     0.00  t2
          0.00      0.00     0.00        5     0.00     0.00  t1


     Above note the 10 calls to t2 and 5 calls to t1.



TIP 185:

     CDPATH - this is a bash variable like PATH that defines a search path
              for the cd command.

     Suppose you have the following directory structure:

             /home/chirico/stuff
                               |-- dirA
                               `-- dirB

     Assume you define CDPATH as follows:

             CDPATH=/home/chirico/stuff

     Now, no matter what directory you are in if you use the cd command below
     you will automatically move to "/home/chirico/stuff/dirA".

             $ cd dirA

     Note you could be in "/etc" and will move directly to "/home/chirico/stuff/dirA".
     This command has the same format as PATH - multiple entries are separated by a colon.
     If the current directory contain a sub-directory dirA, then, it gets priority.

     The following is part of my .bash_profile

             CDPATH=/work/cpearls/src/posted_on_sf/:/work/souptonuts/documentation/:/home/chirico/deleteme/
             export PATH CVS_RSH EDITOR JAVA_HOME CDPATH



TIP 186:

     Groups - add groups and users to groups. The following shows how to create the group "share"
              and add the user "chirico" to this group. The following should be done as root, and
              assumes the account "chirico" already exits.

             $ groupadd share
             $ usermod -G share chirico

     Note the change made to "/etc/group" below:

             $ cat /etc/group|grep 'share'
             share:x:616:chirico

     If the user chirico is currently logged in, he should run the following
     command to immediately have group "share" rights. Or, the next time he logs
     in he will have access to this group.

             $ newgrp share

     Reference the following (TIP 6, TIP 167).



TIP 187:

     oprofile - steps for running oprofile on Fedora.

     Step 1:

       Find out what version of the kernel you are running.

           $ uname -a
           Linux closet.squeezel.com 2.6.12-1.1398_FC4 #1 Fri Jul 15 00:52:32 EDT 2005 i686 i686 i386 GNU/Linux


     Step 2:

       Download the source in a chosen directory. Above, I'm running 2.6.12-1, but I'm going to go for 2.6.12.3, since
       it's a little later. You want the signed file as well.

           $ wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.12.3.tar.gz
           $ wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.12.3.tar.gz.sign

       Now, check the signature.

           $ gpg --verify linux-2.6.12.3.tar.gz.sign linux-2.6.12.3.tar.gz


     Step 3:

       Unpack the file.

           $ tar -xzf linux-2.6.12.3.tar.gz
           $ cd cd linux-2.6.12.3


     Step 4:

       Copy the ".config" used to compile your previous kernel. You should find it
       in the following direcotry "/lib/modules/$(uname -r)/build/.config".

       Copy it to the linux-2.6.12.3 directory.

           $ cp "/lib/modules/$(uname -r)/build/.config" .


     Step 5:

       Run make as follows. It will ask for a few questions on "make oldconfig". The
       make installs below will have to be done with root privileges.

          $ make oldconfig
          $ make bzImage
          $ make modules
          $ make modules_install
          $ make install


     Step 6:

       Edit the "/boot/grub/grub.conf" and set default = 0  as shown below in this
       file.

            default=0
            timeout=5
            splashimage=(hd0,2)/grub/splash.xpm.gz
            hiddenmenu
            title Fedora Core (2.6.12.3)
                    root (hd0,2)
                    kernel /vmlinuz-2.6.12.3 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
                    initrd /initrd-2.6.12.3.img
            title Fedora Core (2.6.12-1.1398_FC4)
                    root (hd0,2)
                    kernel /vmlinuz-2.6.12-1.1398_FC4 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
                    initrd /initrd-2.6.12-1.1398_FC4.img
            title Fedora Core (2.6.11-1.1369_FC4)
                    root (hd0,2)
                    kernel /vmlinuz-2.6.11-1.1369_FC4 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
                    initrd /initrd-2.6.11-1.1369_FC4.img
            title Other
                    rootnoverify (hd0,1)
                    chainloader +1


     Step 7:

       Shutdown with the restart option.

           $ shutdown -r now


     Step 8:

       Run opcontrol. The commands below are done as root.  My kernel was compiled in the following
       directory "/home/kernel/linux-2.6.12.3/", so I'll run opcontrol as follows:

           $ opcontrol --vmlinux=/home/kernel/linux-2.6.12.3/vmlinux

       Now start.

           $ opcontrol --start
           Using 2.6+ OProfile kernel interface.
           Reading module info.
           Using log file /var/lib/oprofile/oprofiled.log
           Daemon started.
           Profiler running.

       Shutdown opcontrol.

           $ opcontrol --shutdown

       Run report.

           $ opreport

           CPU: CPU with timer interrupt, speed 0 MHz (estimated)
           Profiling through timer interrupt
                     TIMER:0|
             samples|      %|
           ------------------
              156088 99.8746 vmlinux
                  60  0.0384 libc-2.3.5.so
                  30  0.0192 oprofiled
                  23  0.0147 libcrypto.so.0.9.7f
                  13  0.0083 bash
                  12  0.0077 screen
                  10  0.0064 sshd
                   9  0.0058 ssh
                   6  0.0038 ip_tables
                   6  0.0038 libncurses.so.5.4
                   5  0.0032 b44
                   5  0.0032 ext3
                   5  0.0032 ld-2.3.5.so
                   4  0.0026 ip_conntrack
                   4  0.0026 jbd
                   2  0.0013 grep
                   1 6.4e-04 libdns.so.20.0.2
                   1 6.4e-04 libisc.so.9.1.5


         Reference the following for more documentation:
             http://oprofile.sourceforge.net/doc/




TIP 188:

     cyrus-imapd with Postfix using sasldb for authentication. For this example
     the server is tape.squeezel.com and the user is chirico.

        Step 1:
        
                   $ yum install cyrus-imapd
                   $ yum install cyrus-imapd-utils
        
            You need "cyrus-imapd-utils" for cyradm.
        
        
        Step 2:
        
          Edit /etc/imapd.conf
        
               configdirectory: /var/lib/imap
               partition-default: /var/spool/imap
               admins: cyrus
               sievedir: /var/lib/imap/sieve
               sendmail: /usr/sbin/sendmail
               hashimapspool: true
               # Chirico Commented the below line
               # sasl_pwcheck_method: saslauthd
               # Because using sasldb
               sasl_pwcheck_method: auxprop
               sasl_auxprop_plugin: sasldb
               #  Chirico end change
               sasl_mech_list: PLAIN
               tls_cert_file: /usr/share/ssl/certs/cyrus-imapd.pem
               tls_key_file: /usr/share/ssl/certs/cyrus-imapd.pem
               tls_ca_file: /usr/share/ssl/certs/ca-bundle.crt
        
        
        Step 3:
        
           Create a user and password:
        
              $ saslpasswd2 -c -u `postconf -h myhostname` cyrus
              $ saslpasswd2 -c -u `postconf -h myhostname` chirico
              $ saslpasswd2 -c -u `postconf -h myhostname` allmail
        
        
           This will automatically create the file /etc/sasldb2. But look
           at the default rights, assuming you ran saslpasswd2 as root:
        
                 $ ls -l /etc/sasldb2
                 -rw-r-----  1 root root 12288 Jul 31 09:50 /etc/sasldb2
        
           We need to correct this in step 4.
        
        
        Step 4:
        
                 $ chown root.mail /etc/sasldb2
                 $ ls -l /etc/sasldb2
                 -rw-r-----  1 root mail 12288 Jul 31 09:50 /etc/sasldb2
        
        
        Step 5:
        
            Update "/etc/postfix/main.cf". Note in /etc/imapd.conf the configdirectory
            points to /var/lib/imap, and if I look at this directory I see the
            socket directory. However, after staring /etc/init.d/cyrus-imapd  there
            will be a socket file "/var/lib/imap/socket/lmtp". (See step 6).
        
                  mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
                  mailbox_transport = cyrus
        
            Restart postfix.
        
                  /etc/init.d/postfix restart
        
        
        Step 6:

            Start cyrus-imapd and look for the socket file.
        
        
                   $ /etc/init.d/cyrus-imapd restart
                   Shutting down cyrus-imapd:                                 [  OK  ]
                   Starting cyrus-imapd: preparing databases... done.         [  OK  ]
        
            Now you should see the lmtp file:
        
                   $ ls -l /var/lib/imap/socket/lmtp
                   srwxrwxrwx  1 root root 0 Jul 31 10:04 /var/lib/imap/socket/lmtp
        
        
        Step 7:
        
            Add users. Note, you may have to go back to step 3 to add them to /etc/sasldb2
            as well.
        
                   $ su - cyrus
                   $ cyradm tape.squeezel.com
                   tape.squeezel.com> cm user.chirico
                   tape.squeezel.com> quit
        
            Now got back as root, and check that everything was created correctly.
        
                   $ ls /var/spool/imap/c/user/
                   total 8
                   drwx------  2 cyrus mail 4096 Jul 31 10:21 chirico
        
        
        Step 8:
        
             Run a mail test. We'll do this as root to the chirico account.
        
                   $ mail -s 'First test'  chirico
                   first test
                   .
        
             Now, still as root check the maillog. Normally everything should work.
        
                  $ tail /var/log/maillog
        
             However, I got the following error below.

                     Jul 31 10:29:03 tape postfix/cleanup[30124]: AE7CB1B34A4: message-id=<20050731142903.AE7CB1B34A4@tape.squeezel.com>
                     Jul 31 10:29:03 tape postfix/qmgr[30120]: AE7CB1B34A4: from=<root@tape.squeezel.com>, size=315, nrcpt=1 (queue active)
                     Jul 31 10:29:03 tape pipe[30128]: fatal: pipe_comand: execvp /cyrus/bin/deliver: No such file or directory

             If you get a similiar error, you may need to adjust the settting in /etc/postfix/master.cf
        
                 # This is the problem in /etc/postfix/master.cf
                 cyrus     unix  -       n       n       -       -       pipe
                   user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
        
             My deliver file is the following
        
                 $ ls -l /usr/lib/cyrus-imapd/deliver
                 -rwxr-xr-x  1 root root 846228 Apr  4 18:59 /usr/lib/cyrus-imapd/deliver
        
             So I need to change my /etc/postfix/master.cf as follows:
        
                 # Fix because by deliver file is under  /usr/lib/cyrus-imapd/deliver
                 cyrus     unix  -       n       n       -       -       pipe
                   user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
        
        
             If changes were needed, like I had to do, restart postfix
        
                 $ /etc/init.d/postfix restart
        
             Now, if everything works, you should start to see numbers in the spool directory like "1." and
             "2.".
        
                 $ ls -l /var/spool/imap/c/user/chirico/
                 total 40
                 -rw-------  1 cyrus mail  545 Jul 31 10:44 1.
                 -rw-------  1 cyrus mail  547 Jul 31 10:45 2.
                 -rw-------  1 cyrus mail 1276 Jul 31 10:45 cyrus.cache
                 -rw-------  1 cyrus mail  153 Jul 31 10:21 cyrus.header
                 -rw-------  1 cyrus mail  196 Jul 31 10:45 cyrus.index

        Step 9:
        
             Local firewall.
        
                 # imap
                iptables -A INPUT -p udp -s 192.168.1.0/24  --dport 143 -j ACCEPT
                iptables -A INPUT -p tcp -s 192.168.1.0/24  --dport 143 -j ACCEPT

        Step 10:
        
             Configure cyrus-imapd to start for run-level 3 and 5.

                 # chkconfig --level 35 cyrus-imapd on


       HINTS - 

        Something to watch out for:

              Something to watch out for: If a user creates a .forward file in their shell account with the
              following entry, then, mail will not get mail relayed to cyrus.

                  "|exec /usr/bin/procmail"


             The /etc/maillog will show something like this:

                    to=<chirico@squeezel.squeezel.com>, orig_to=<chirico>, relay=local, delay=0,
                          status=sent (delivered to command: exec /usr/bin/procmail)

             Remove the ".forward" file from their home directory and you'll get the following:

                    to=<chirico@squeezel.squeezel.com>, relay=cyrus, delay=0,
                          status=sent (squeezel.squeezel.com)


              mutt with IMAP?  (See TIP 190)



TIP 189:

     expand - convert tabs to spaces in a file.

             $ expand How_to_Linux_and_Open_Source.txt > notabs



TIP 190:

     mutt with imap - assume you have setup imap (see tip 188). Now how do you configure
                      your ".muttrc" file to automatically connect, securely to the IMAP server?


       
     Below is an example of my ".muttrc" file. For this example, assume my password is "S0m3paSSw0r9".

             $ cat .muttrc
             set spoolfile = "imaps://chirico:S0m3paSSw0r9@squeezel.squeezel.com/
             set imap_force_ssl=yes
             set certificate_file=~/.mutt/certificates/72d31154.0

     Now, you want to copy the certificate as a "file.pem" and run "c_rehash" to convert this
     file to a number. See the article. See the following article on how to do this under the 
     fetchmail section.

          http://souptonuts.sourceforge.net/postfix_tutorial.html

     This is a quick summary of creating this key.

             $ openssl s_client -connect squeezel.squeezel.com:995 -showcerts > file.pem
             $ c_rehash ~/.mutt/certificates
        


TIP 191:

     Apache - CGI scripts.  There are two ways to enable CGI scripts. The second method is the
              prefered method.


           First way, the easy way. Look for the "http.conf" file. On Fedora Core, this file can be
           found under "/etc/httpd/conf/httpd.conf". Edit this file as follows to make 
           "http://squeezel.squeezel.com/chirico-cgi/" execute scripts.

                     ScriptAlias /chirico-cgi/ "/home/chirico/cgi-bin/"


           Second way, the better way. Instead of doing the above, make the following change in 
           "/etc/httpd/conf/httpd.conf".

                     <Directory /home/chirico/cgi-bin>
                      Options +ExecCGI
                      SetHandler chirico-cgi
                     </Directory>


        Running a test script. Now copy the following test script into the directory "/home/chirico/cgi-bin"
        and change the rights to execute for the user running this.

                  #!/bin/sh
                  # Save as test.cgi
                  #  chown apache.apache test.cgi
                  #  chmod 700 test.cgi
                  echo "Content-Type: text/html"
                  echo
                  echo "Hello world from user <b>`whoami`</b>! "



TIP 192:

     Bash - using getopts for your bash scripts.

                   #!/bin/bash
                   while getopts "ab:cd:" Option
                   # b and d take arguments
                   #
                   do
                     case $Option in
                       a) echo -e "a = $OPTIND";;
                       b) echo -e "b = $OPTIND $OPTARG";;
                       c) echo -e "c = $OPTIND";;
                       d) echo -e "d = $OPTIND $OPTARG";;
                    esac
                  done
                  shift $(($OPTIND - 1))



TIP 193:

     Sieve - creating sieve recipes with "sieveshell"

     The following sieve script put all jefferson.edu mail into the 
     folder jefferson. This assumes that I have already created the IMP 
     directory, or mail box (INBOX.jefferson), which can be done in mutt 
     with the "C" command. Below is an example of finding "jefferson.edu"
     anywhere in the header. 

         # This is a file named jefferson.siv
         require ["fileinto"];
         if header :contains "Received" "from jefferson.edu" {
           fileinto "INBOX.jefferson";
           stop;
         }

     Now, from the command propt execute "sieveshell" with the hostname of the
     imap server. My server is squeezel.squeezel.com, so I would execute the 
     following:

          $ sieveshell squeezel.squeezel.com
          connecting to squeezel.squeezel.com
          Please enter your password:****
          > put jefferson.siv
          > activate jefferson.siv
          > list
          jefferson.siv  <- active script
          > quit

     Note the put brings in the script. And you need to activiate it.

     You can activate a sieve script for any user on your system if you are
     root. This is an example of activating a script for user chirico. Assume
     below the root prompt is "#".

          # sieveshell -a chirico -u chirico squeezel.squeezel.com

     You can also automate everything from a bash script. But note after
     the -e the commands, and not a file with the commands, follows within
     quotes. This is the script I use for my home system.

         #!/bin/bash
         sieveshell -a chirico -u chirico -e 'deactivate
         delete chirico.siv
         put chirico.siv
         activate chirico.siv
         list
         '  squeezel.squeezel.com



     References:
         http://wiki.fastmail.fm/index.php/SieveRecipes
         http://www.cyrusoft.com/sieve/#documents



TIP 194:

     emacs - editing files remotely with tramp. Tramp comes with the latest version of emacs.
             That means if you're using Fedora core 4, with emacs, you have tramp. This is 
             ideal for editing files on remote computers that do not use emacs.

             Edit the ".emacs" file and add the following line:

                 (require 'tramp)
                 (setq tramp-default-method "scp")

             Now, to edit a file on computer tape.squeezel.com (C-x, C-f) and
             enter the following in Find file:

                 Find file:/chirico@tape.squeezel.com:test.txt


             References:

                    http://savannah.gnu.org/projects/tramp/

             

TIP 195:

     trusted X11 forwarding - running gnome and KDE both on one screen, at the same
             time securely. The following assumes gnome is running on the current
             computer and "closet.squeezel.com" has KDE

              $ ssh -Y  closet.squeezel.com
              $ startkde

          Or assume you want to run gnome on "closet.squeezel.com"

              $ ssh -Y  closet.squeezel.com
              $ gnome-session

          By default Fedora Core allows ForwardX11 over ssh. Note you want to use
          the -Y option above and NOT -X. 

          Suppose you want a remote "gnome-session" on ctl-alt-F12. Below is an 
          example of getting the remote computer closet.squeezel.com, and you
          can still have the above configuration.

          First you must allow magic cookies for each server connection.
             
              $ MCOOKIE=$(mcookie)
              $ xauth add $(hostname)/unix:1 MIT-MAGIC-COOKIE-1 $MCOOKIE
              $ xauth add localhost/unix:1 MIT-MAGIC-COOKIE-1 $MCOOKIE
  
          Again, note that you have to add this for EACH connection. So if you wanted 2 as well

              $ MCOOKIE=$(mcookie)
              $ xauth add $(hostname)/unix:2 MIT-MAGIC-COOKIE-1 $MCOOKIE
              $ xauth add localhost/unix:2 MIT-MAGIC-COOKIE-1 $MCOOKIE

          On squeezel.squeezel.com create a new xterm. If :1 is take below
          try :2. The vt12 is for switching to ctl-alt-F12.

              $ xinit -- :1 vt12

          Note, if you do not add the above cookies, you will get the follow error:
         
               Xlib: connection to ":1.0" refused by server
               Xlib: No protocol specified

          The screen may be hard to read. At this point ssh -Y to the remote computer.

              $ ssh -Y closet.squeezel.com
              $ gnome-session

          Yes, you will get errors about sound and some custom drivers is the remove 
          computer has different hardware. After is loads, you can switch back and
          forth between session with (ctl-alt-F12)  and (ctl-alt-F7)



TIP 196:

     Suspend ssh session - you have just sshed into a computer "ssh -l user example.com", and you
          want to get back to the terminal prompt of the computer you started with. Escapte, by 
          default with ssh is "~", so enter "~" followed by "ctl-z" to suspend.



TIP 197:

     Quick way to send a text file 

              $ sendmail -f mike.chirico@gmail.com mchirico@comcast.net < /etc/fstab



TIP 198:

     size - determining the size of the text segment, data segment, and "bss" or uninitialized data segment.

              $ size /bin/sh /bin/bash
               text        data     bss     dec     hex filename
              586946      22444   18784  628174   995ce /bin/sh
              586946      22444   18784  628174   995ce /bin/bash

          Note above that "/bin/sh" and "/bin/bash" have equal text,data and bss numbers. It's
          highly likely that these are the same programs.

              $ ls -l /bin/sh
               lrwxrwxrwx  1 root root 4 Jan 14  2005 /bin/sh -> bash

          Yep, it's the same program. Here's a further definition of each segment.

              Text segment: The machine instructions that the CPU executes. This is usually
                            read only and sharable.

              Data segment: Contains initialized variables in a program. You also know these
                            as declarations and definitions.

                               int max = 200;

              Uninitialized data segment: Think of this as a declaration only, or data that
                            is only initialized by the kernel to arithmetic 0 or null pointers
                            before program execution.

                               char s[10];



TIP 199:

     Using the at command.

       Below is a simple example if running the ls command at 11:42am that
       will send mail -m to the user that executed it.


       We'll execute job1 defined as follows and set to be executable. 

           $ cat ./job1
           #!/bin/bash
           date >> /tmp/job1

       The at command is listed below. For queue "-q" names you can only
       specify one letter. Here we're using x. The letter determines the
       priority with "a" the highest.

           $ at -q x  -f ./job1 -m  11:54am
           job 3 at 2005-10-04 11:54

       Now, if you execute the atq command, you'll get the following.

           $ atq
           3       2005-10-04 11:54 x chirico

       It's also possible to execute jobs at the command line entering
       a ctl-d at the end of the input.

           $ at -q x  -m 12:08pm
           at> ls -l
           at> who
           at> date
           at> ^D


       Or for a job to execute 1 minute from now.

           $ at -q x -m `date -d '1 minute' +"%H:%M"`
           at> ls -l
           at> date
     

     Important points: The atd daemon must be running. To check if
      it's running do the following:

            $ /etc/init.d/atd status

      Also, if there is an /etc/at.allow file, then only users in that
      file will be allowed to execute at.

      If /etc/at.deny exists but is empty and there is no /etc/at.allow,
      then, everyone can execute the at command.



TIP 200:

     lsusb - command will display all USB buses and all devices connected.

        $ lsusb
        Bus 005 Device 003: ID 413c:2010 Dell Computer Corp.
        Bus 005 Device 002: ID 413c:1003 Dell Computer Corp.
        Bus 005 Device 001: ID 0000:0000
        Bus 004 Device 001: ID 0000:0000
        Bus 003 Device 003: ID 0fc5:1227 Delcom Engineering
        Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Mouse
        Bus 003 Device 001: ID 0000:0000
        Bus 002 Device 001: ID 0000:0000
        Bus 001 Device 001: ID 0000:0000



TIP 201:

     Memory fragmentation - if you suspect workload memory fragmentation issues
     and you want to monitor the current state of you system, then, consider
     looking at the output from /proc/buddyinfo on recent kernels.

        $ cat /proc/buddyinfo
      Node 0, zone      DMA    541    218     42      2      0      0      0      1      1      1      0 
      Node 0, zone   Normal   2508   2614     52      1      5      5      0      1      1      1      0 
      Node 0, zone  HighMem      0      1      3      0      1      0      0      0      0      0      0 

     The following definition is taken from  ./Documentation/filesystems/proc.txt in the 
     Linux kernel source.

       Each column represents the number of pages of a certain order which are
       available.  In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
       ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
       available in ZONE_NORMAL, etc...



TIP 202:

     arp - Linux ARP kernel moduel.  This command implements the Address Resolution Protocol.

     This is an example of the command.

        $ arp
        Address                  HWtype  HWaddress           Flags Mask            Iface
        tape.squeezel.com        ether   00:50:DA:60:5B:AD   C                     eth0
        squeezel.squeezel.com    ether   00:11:11:8A:BE:3F   C                     eth0
        gw.squeezel.com          ether   00:0F:66:47:15:73   C                     eth0

       
TIP 203:

     dbench - performance monitoring. 

     So, how does your system react when the load average is above 600. Have you even seen a 
     computer with a load average of 600? Well, this could be your chance. 

         Reference: http://freshmeat.net/projects/dbench/

     The following gives a load average of 10 on my system.

        $ dbench 34

     If you want a higher load, just increase the number.



TIP 204:

     /etc guide - a listing of common files in the /etc directory.

        /etc/exports: this file is used to configure NFS.

        /etc/ftpusers: the users on your system who are restricted from FTP login.

        /etc/motd: message of the day, which users see after login.

        /etc/named.conf: DNS config file.

        /etc/profile: common user information.

        /etc/inittab: this file contains runlevel start information.

        /etc/services: the services and their respective ports.

        /etc/shells: this contains the names of all shells installed on the system.

        /etc/passwd: this file contains user information.

        /etc/group: security group rights.


        
TIP 205: 

     logger - is a bash command utility for writing to /var/log/messages or the
            other files defined in /etc/syslog.conf.

            $ logger -t TEST more of a test here

         This is what shows up in /var/log/messages
  
            Oct 28 07:15:50 squeezel TEST: more of a test here


    
TIP 206: 

     accton, lastcomm - accouting on and last command. This is 
         a way to monitor users on your system. As root, you 
         would implement this as follows:

           $ accton -h
            Usage: accton [-hV] [file]
            [--help] [--version]

            The system's default process accounting file is /var/account/pacct.

         Note the default file location is /var/account/pacct so we'll turn
         it on system wide with the following command.

           $ accton /var/account/pacct

         Now take a look at this file. It will grow. To see command that
         are executed, use the lastcomm command.

           $ lastcomm

         The above command gives output for all users. To get the data
         for user "chirico" execute the following command:

           $ lastcomm --user chirico

         You can also get a summary of commands with sa.

           [chirico@big ~]$ sa
           30       5.23re       0.00cp    10185k
           11       4.83re       0.00cp     8961k   ***other
            8       0.13re       0.00cp    19744k   nagios*
            4       0.00re       0.00cp     2542k   automount*
            3       0.00re       0.00cp      680k   sa
            2       0.13re       0.00cp    17424k   check_ping
            2       0.13re       0.00cp      978k   ping

         To turn off accounting, execute accton without a filename.

           $ accton



TIP 207:

     CPU Temperature on a laptop. The following is the temperature
       of my Dell laptop. 

           $ cat /proc/acpi/thermal_zone/THM/temperature
           temperature:             58 C

      


TIP 208:

     script -f with mkfifo to allow another user to view what you type
          in real-time.


        Step 1.  Create a fifo (first in first out) file that the other
              user can view. For this example create the file /tmp/scriptout

               [chirico@laptop ~]$ mkfifo /tmp/scriptout

        Step 2.  Have the second user, voyeur user, cat this file. Output will block
              for them until you complete step 3. The other user, voyer,
              is executing the command below.
 
               [voyeur@laptop ~]$ cat /tmp/scriptout

        Step 3.  The original user runs the following command.

               [chirico@laptop ~]$ script -f  /tmp/scriptout
               Script started, file is /tmp/scriptout

             Now anything typed, including a vi session, will be displayed to the
             voyeur user in step 2. 

        See TIP 46.



TIP 209:

     fsck forced on next reboot.  To do this, as root issue the following commands.

            $ cd /
            $ touch forcefsck

          Now reboot the system, and when it comes up fsck will be forced on the system.

            $ shutdown -r now



TIP 210:

     /dev/random and /dev/urandom differ in their random generating properties. /dev/random
        only returns bytes when enough noise has been generated from the entropy pool. In
        contrast /dev/urandom will always return bytes.


     Reference: http://sourceforge.net/direct-dl/mchirico/cpearls/simple_but_common.tar.gz (rand.c)



TIP 211:

     Want to find out the speed of your NIC?  (Full Duplex or Half), then use ethtool.

               [root@squeezel ~]# ethtool eth0
               Settings for eth0:
                       Supported ports: [ MII ]
                       Supported link modes:   10baseT/Half 10baseT/Full
                                               100baseT/Half 100baseT/Full
                                               1000baseT/Half 1000baseT/Full
                       Supports auto-negotiation: Yes
                       Advertised link modes:  10baseT/Half 10baseT/Full
                                               100baseT/Half 100baseT/Full
                                               1000baseT/Half 1000baseT/Full
                       Advertised auto-negotiation: Yes
                       Speed: 100Mb/s
                       Duplex: Full
                       Port: Twisted Pair
                       PHYAD: 1
                       Transceiver: internal
                       Auto-negotiation: on
                       Supports Wake-on: g
                       Wake-on: d
                       Current message level: 0x000000ff (255)
                       Link detected: yes




TIP 212:

     rpm install hang? You might need to delete the lock state information. 

        $ nl /etc/rc.d/rc.sysinit | grep rpm
        720   rm -f /var/lib/rpm/__db* &> /dev/null

     Note the command 

        $ rm -f /var/lib/rpm/__db*

     Because sometimes you will run "rpm -ivh somerpm" and it will just sit
     there.




TIP 213:

     Apache - limit access to certain directories based on IP address in the
         httpd.conf file.

          You can do this completely from /etc/httpd/conf/httpd.conf which
          are shown below for multiple IP addresses. Note that all 3 setting
          are the same.

                10.0.0.0/255.0.0.0
                10.0.0.0/8
                10

          However, the following is different

                10.0.0.0/24   only allows 10.0.0.1 to 10.0.0.254


          Some complete settings in /etc/httpd/conf/httpd.conf 

             <Directory /var/www/html/chirico/>
                 Order allow,deny
                 Allow from 10.0.0.0/8      # All 10.
                 Allow from 192.168.0.0/16  # All 192.168
                 Allow from 127             # All 127.
             </Directory>

          Don't forget to reload httpd with the following command.
        
             $ /etc/init.d/httpd reload

          

TIP 214:

     Open Files - determining how many files are currently open.

             $ cat /proc/sys/fs/file-nr
             2030    263     104851
              |       |        \- maximum open file descriptors 
              |       |         
              |       \- total free allocated file descriptors
              |
              (Total allocated file descriptors since boot)

        Note the maximum number can be set or changed.

              $ cat /proc/sys/fs/file-max
              104851

        To change this

              $ echo "804854" > /proc/sys/fs/file-max
 
        Note lsof | wc -l will report higher numbers because this includes
        open files that are not using file descriptors such as directories,
        memory mapped files, and executable text files.

        (Reference http://www.netadmintools.com/art295.html
         and also see the man page for this: man 5 proc )



TIP 215:

     Ctrl-Alt-Del will cause an immediate reboot, without syncing dirty buffers by
     setting the value > 0 in /proc/sys/kernel/ctrl-alt-del.

               $ echo 1 > /proc/sys/kernel/ctrl-alt-del
       

        (Reference: man 5 proc)




TIP 216:

     Redefining keys in X using xev and xmodmap.  The program xev, used in an X window 
     terminal screen will display information on mouse movements, keys pressed and 
     released.

        $ xev

     Now type shift-4 and you'll notice the event details below:

        KeyPress event, serial 29, synthetic NO, window 0x3800001,
            root 0x60, subw 0x0, time 55307049, (418,242), root:(428,339),
            state 0x1, keycode 13 (keysym 0x24, dollar), same_screen YES,
            XLookupString gives 1 bytes: (24) "$"
            XmbLookupString gives 1 bytes: (24) "$"
            XFilterEvent returns: False
        
        KeyRelease event, serial 29, synthetic NO, window 0x3800001,
            root 0x60, subw 0x0, time 55307184, (418,242), root:(428,339),
            state 0x1, keycode 13 (keysym 0x24, dollar), same_screen YES,
            XLookupString gives 1 bytes: (24) "$"
       
     So, if you want to redefine this key to say copyright, see (/usr/X11R6/include/X11/keysymdef.h)
     you would type the following.

        $ xmodmap -e 'keycode 13 = 4 copyright'

     To get the key back to the dollar, issue the following command.

        $ xmodmap -e 'keycode 13 = 4 dollar'

     By the way it's possible to define multiple key codes for a sigle key. You'll need
     to have a key defined as the Mode_switch. Perhaps you'd like to use the Windows key,
     or the key with the Microsoft logo on it, since you're using Linux. This key is
     keycode 115

        $ xmodmap -e 'keycode 115 = Mode_switch'

     Now you could define 3 values to the shift-4. For this example use ld, Yen and dollar.

        $ xmodmap -e 'keycode 13 = 4 dollar sterling yen'

     So pressing the keys gives you the following:

          shift-$          (dollar sign)
          Windows-$        (lb sign)
          Windows-shift-$  (Yen sign)

     You could go crazy and redefine all you keys.

     (Thanks to hisham for this tip).



TIP 217:

     Threads - which version of threads are you using?

          $ getconf GNU_LIBPTHREAD_VERSION
          NPTL 2.3.90

     For a history on threads used with gcc reference the following:
          
          http://en.wikipedia.org/wiki/NPTL




TIP 218:

     Screenshots using ImageMagick. 

        If you want the entire screen, execute the following:

            $ import -window root screen.png

        Or to crosshair select the region with your mouse, execute 
        the following instead.

            $ import screen.png

        KDE has the ability to take screenshots with the command below.

            $ ksnapshot

        GNOME likewise has a command too.

            $ gnome-panel-screenshot --delay 6



        Visting ImageMagick again, the xwininfo command give window information and the id can be
        used to capture images with the import command.

            $ xwininfo

          xwininfo: Please select the window about which you
          would like information by clicking the
          mouse in that window.

          xwininfo: Window id: 0x1e00007 "chirico@squeezel:/work/svn/souptonuts - Shell - Konsole"

          Absolute upper-left X:  4
          Absolute upper-left Y:  21
          Relative upper-left X:  0
          Relative upper-left Y:  0
          Width: 880
          Height: 510
          Depth: 24
          Visual Class: TrueColor
          Border width: 0
          Class: InputOutput
          Colormap: 0x20 (installed)
          Bit Gravity State: NorthWestGravity
          Window Gravity State: NorthWestGravity
          Backing Store State: NotUseful
          Save Under State: no
          Map State: IsViewable
          Override Redirect State: no
          Corners:  +4+21  -396+21  -396-493  +4-493
          -geometry 880x510+0+0

        Now use the import command with the Window id. My example is shown below.

             $ import -window 0x1e00007  id.miff

        And to quickly display this image that you just saved, use the display command.

             $ display id.miff 



TIP 219:

     File Access over SSH using FUSE (Filesystem in USErspace). This is a very good way to 
     mount a remote filesystem locally. It's  like a secure NFS mount, but you don't require 
     admin privileges on the remote computer. You do need to have fuse-sshfs installed on 
     the local computer that will perform the filesystem mount.

     The following works with Fedora Core 5. Only the users added to the fuse group can mout 
     external drives. Below the user chirico is being added to the group fuse.

             $ yum install fuse-sshfs
             $ usermod -a -G fuse chirico
     
     You'll need to reboot.

             $ shutdown -r now

             
     Next I'm going to mount the remote filesystem v0.squeezel.com. This is done as user chirico
     on the local computer. I'm using root on the remote computer v0.squeezel.com because I
     want to mount the complete drive.

             $ mkdir v0
             $ sshfs root@v0.squeezel.com:/  v0
             $ cd v0
             $ ls -l
               bin   dev  home  lost+found     media  mnt  opt   q     sbin     srv  tmp  var
               boot  etc  lib   master_backup  misc   net  proc  root  selinux  sys  usr
        

     Now to unmount the filesystem

             $ fusermount -u /home/chirico/v0

     Yes, you can mount the filesystem on boot. Below shows an example entry for /etc/fstab, but
     this only allows user on the current system to view what is is /mnt/v0. 

             sshfs#root@v0.squeezel.com:/var/log             /mnt/v0 fuse defaults    0 0

     References:
        (http://fuse.sourceforge.net/sshfs.html)




TIP 220:

     OpenVPN - A full-featured SSL VPN solution. The following demonstrates
               a very simple OpenVPN setup between two Fedora Core 5 computers
               big.squeezel.com 192.168.1.12 and tape.squeezel.com 192.168.1.155

               As root install the package on both computers.

                  $ yum -y install openvpn


       Setup on big.squeezel.com 192.168.1.12

                  $ iptables -A INPUT -p udp -s 192.168.1.155  --dport 1194 -j ACCEPT
                  $ iptables -A INPUT -i tun+ -j ACCEPT
                  $ iptables -A INPUT -i tap+ -j ACCEPT
                  $ iptables -A INPUT -i tap+ -j ACCEPT
                  $ iptables -A FORWARD -i tap+ -j ACCEPT

             Note - make sure you have commented out the following line 
                    in /etc/sysconfig/iptables

                  # -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited

             Now from continuting with the commands that need to be executed on 
             big.squeezel.com 192.168.1.12 do one of the following
           
                  $ openvpn --remote tape.squeezel.com  --dev tun1 --ifconfig 10.4.0.1 10.4.0.2 --verb 9

             The above statement gives lots of errors. Once it's working you may want
             the following statement without the --verb 9 option.

                  $ openvpn --remote tape.squeezel.com  --dev tun1 --ifconfig 10.4.0.1 10.4.0.2

             After you finish the setup commands for tape.squeezel.com immediately below, you'll be
             able to access tape.squeezel.com as 10.4.0.2.


       Setup on tape.squeezel.com 192.168.1.155

                  $ iptables -A INPUT -p udp -s 192.168.1.12  --dport 1194 -j ACCEPT
                  $ iptables -A INPUT -i tun+ -j ACCEPT
                  $ iptables -A INPUT -i tap+ -j ACCEPT
                  $ iptables -A INPUT -i tap+ -j ACCEPT
                  $ iptables -A FORWARD -i tap+ -j ACCEPT

             Note - again, make sure you have commented out the following line 
                    in /etc/sysconfig/iptables

                  # -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited

             The openvpn commands are tape.squeezel.com are reversed from what is shown
             above.

                  $ openvpn --remote big.squeezel.com --dev tun1 --ifconfig 10.4.0.2 10.4.0.1 --verb 9

             Or
                  $ openvpn --remote big.squeezel.com --dev tun1 --ifconfig 10.4.0.2 10.4.0.1


             Now you can access all services and ports from big.squeezel.com on 10.4.0.1 for 
             such services as MySQL, secure Web, imap, etc. A quick test is nmap as follows:

                  $ nmap -A -T4 10.4.0.1

                  Starting Nmap 4.03 ( http://www.insecure.org/nmap/ ) at 2006-05-20 13:54 EDT
                  Interesting ports on 10.4.0.1:
                  (The 1671 ports scanned but not shown below are in state: closed)
                  PORT     STATE SERVICE VERSION
                  22/tcp   open  ssh     OpenSSH 4.3 (protocol 2.0)
                  111/tcp  open  rpcbind  2 (rpc #100000)
                  3306/tcp open  mysql   MySQL (unauthorized)

                  Nmap finished: 1 IP address (1 host up) scanned in 7.116 seconds



TIP 221:

     openssl - Some common commands.

             Finding the openssldir (Directory for OpenSSL files).

                  $ openssl version -a|grep OPENSSLDIR
                  OPENSSLDIR: "/etc/pki/tls"

             Connect to a secure SMTP server with STARTTLS, assuming the server name is
             squeezel.squeezel.com

                  $ openssl s_client -connect squeezel.squeezel.com:25 -starttls

         

      Reference (http://www.madboa.com/geek/openssl/)



TIP 222:

     Bash functions. This is easy, and I find it very useful to create bash functions
     for repeated commands. For example, suppose you want to create a quick bash function
     to cd to /var/log, tail messages and tail secure. You can create this function as
     follows:

                  [root@v5 log]# m()
                  m()
                  > { cd /var/log
                  { cd /var/log
                  > tail messages
                  tail messages
                  > tail secure
                  tail secure
                  > }
                  }
                  
     Above I'm typing m() then hitting return. Note the echo on the next line followed
     by the prompt >. I then enter {. 



TIP 223:

     Stats on DNS Server. You can get stats on your DNS server. 

       The following works for BIND 9:

                  $ rndc stats

         On my system I see the output in "/var/named/chroot/var/named/data/named_stats.txt", which
         if an FC4 system. By the way, if you're using BIND 8, the command is "ndc stats", but that
         has a completely different format.


       Format of the output

            +++ Statistics Dump +++ (1153791199)
            success 297621
            referral 32
            nxrrset 21953
            nxdomain 33742
            recursion 28243
            failure 54
            --- Statistics Dump --- (1153791199)

      The number (1153791199) can be converted with the date command.

                  $ date -d '1970-01-01 1153791199 sec'
                  Tue Jul 25 02:33:19 EDT 2006

      That's 1153791199 seconds since 1970-01-01 UCT. Which is 4 hours fast,
      from EDT.



TIP 224:

     snmp - simple network monitoring protocol. The following steps setup snmp on Fedora Core 5.

                  $ yum install net-snmp*

         Next add the following line in "/etc/snmp/snmpd.conf" at the bottom.

                  rocommunity pA33worD

         Start the snmp service.

                  $ /etc/init.d/snmpd restart

         Once started, from the command prompt, it's possible to get stats on the computer.

                  $ snmpwalk -v 1 -c pA33worD localhost system
         Or
                  $ snmpwalk -v 1 -c pA33worD localhost interface

         Or
                  $ snmpgetnext -v 1 -c pA33worD localhost sysUpTime
                  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (26452) 0:04:24.52

         Note the Timeticks is in 100th of a second. So the computer above has been running
         for 264.52 seconds.

         Reference( TIP 225 shows how to use MRTG for gathering snmp stats).
                  http://www.net-snmp.org/tutorial/tutorial-5/commands/snmpv3.html


TIP 225:

     MRTG - Multi Router Traffic Grapher.  

                  $ cfgmaker --output=/etc/mrtg/v5.squeezel.com \
                    ifref=ip --global "workdir:/var/www/html/mrtg/stats"\
                    pA33worD@v5.squeezel.com

        Reference: http://www.chinalinuxpub.com/doc/www.siliconvalleyccie.com/linux-hn/mrtg.htm



TIP 226:

     Back Trace - This is a method of getting a back trace for all processes on the system.
                  it assumes the following: a. Kernel was build with CONFIG_MAGIC_SYS-REQ 
                  enabled (which Fedora 5 kernels are) b. You can get direct access to the 
                  monitor.

             Step 1.

                  Ctl-Alt-F1 (This brings you to the text console)

             Step 2.

                  Alt-ScrollLock 
                  Ctl-ScrollLock
          
                  Note above that's Alt-ScrollLock followed by Ctl-ScrollLock. You should see
                  a lot of text on the screen. To fast to read, but don't worry the text will
                  be in /var/log/messages at the end.

                  On my system the ScrollLock key is next to the NumLock key. 




TIP 227:

     Ext3 Tuning - One advantage of Ext3 over Ext2 is directory indexing, which  imporves file
                  access in directories containing large files or when the directory contains
                  many files. Directory indexing improves performance by using hashed binary 
                  trees. 

                  There are two ways to enable dir_index. First, find the device using the mount
                  command.

                      $ mount

                      /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
                      proc on /proc type proc (rw)
                      sysfs on /sys type sysfs (rw)
                      devpts on /dev/pts type devpts (rw,gid=5,mode=620)
                      /dev/sda1 on /boot type ext3 (rw) <--- This is the one you want
                      tmpfs on /dev/shm type tmpfs (rw)
                      none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
                      sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
                      automount(pid2001) on /net type autofs (rw,fd=4,pgrp=2001,minproto=2,maxproto=4)                   


                  From the above command, the device used is /dev/sda1.  Using the tune2fs command,
                  directory indexing will only apply to directories created after running the 
                  command below.               

                       $ tune2fs -O dir_index /dev/sda1

                  However, if you want it to apply to all directories, use the e2fsck command as  
                  shown below:

                       $ e2fsck -D -f /dev/sda1

                  You'll need to bypass the warning message.

     
     Reference: "Tuning Journaling File Systems: A small amount of effort an dtime can yield big
                results",by Steve Best. Linux Magazine, September 10, 2006. This author as has
                a very good book titled: "Linux Debugging and Performance Tuning."



TIP 228:

     NIC bonding - binding two or more NICs to one IP address to improve performance. The following
                instructions were done on Fedora Core 5.

         Step 1.
             
            Create the file ifcfg-bond0 with the IP address, netmask and gateway. Shown
            below is my file.

              $ cat /etc/sysconfig/network-scripts/ifcfg-bond0

                   DEVICE=bond0
                   IPADDR=192.168.1.12
                   NETMASK=255.255.255.0
                   GATEWAY=192.168.1.1
                   USERCTL=no
                   BOOTPROTO=none
                   ONBOOT=yes

         Step 2.

            Modify eth0, eth1 and eth2. Shown below are each one of my files. Note that
            you must comment out, or remove the ip address, netmask, gateway and hardware
            address from each one of these files, since settings should only come from
            the ifcfg-bond0 file above. I've chosen to comment out the lines, instead of 
            removing, should I decide to unbond my NICS sometime in the future.

              $ cat /etc/sysconfig/network-scripts/ifcfg-eth0

                  # Linksys Gigabit Network Adapter
                  DEVICE=eth0
                  BOOTPROTO=none
                  #HWADDR=00:12:17:5C:A7:9D
                  #IPADDR=192.168.1.12
                  #NETMASK=255.255.255.0
                  #TYPE=Ethernet
                  #GATEWAY=192.168.1.1
                  #USERCTL=no
                  #IPV6INIT=no
                  #PEERDNS=yes
                  ONBOOT=yes
                  # Settings for Bond
                  MASTER=bond0
                  SLAVE=yes


              $ cat /etc/sysconfig/network-scripts/ifcfg-eth1

                  # Linksys Gigabit Network Adapter
                  DEVICE=eth1
                  BOOTPROTO=none
                  #HWADDR=00:12:17:5C:A7:C9
                  #IPADDR=192.168.1.13
                  #NETMASK=255.255.255.0
                  ONBOOT=yes
                  #TYPE=Ethernet
                  USERCTL=no
                  #IPV6INIT=no
                  #PEERDNS=yes
                  #
                  # Settings for bonding
                  MASTER=bond0
                  SLAVE=yes


              $ cat /etc/sysconfig/network-scripts/ifcfg-eth2

                  # Linksys Gigabit Network Adapter
                  DEVICE=eth2
                  BOOTPROTO=none
                  #HWADDR=00:12:17:5C:A7:9D
                  #IPADDR=192.168.1.12
                  #NETMASK=255.255.255.0
                  ONBOOT=yes
                  #TYPE=Ethernet
                  #GATEWAY=192.168.1.1
                  #USERCTL=no
                  #IPV6INIT=no
                  #PEERDNS=yes
                  MASTER=bond0
                  SLAVE=yes

         Step 3.

            Set the load parameters for bond0 bonding kernel module. Append the
            following lines to /etc/modprobe.conf 

                 # bonding commands 
                 alias bond0 bonding
                 options bond0 mode=balance-alb miimon=100


         Step 4.

            Load the bond driver module from the command prompt.

                 $ modprobe bonding


         Step 5.

            Restart the network, or restart the computer. Note I restarted to computer,
            since my NICs above had MAC assignments.

                 $ service network restart   # Or restart computer

             Take a look at the proc settings. 

                 $ cat /proc/net/bonding/bond0 
                 Ethernet Channel Bonding Driver: v3.0.3 (March 23, 2006)

                 Bonding Mode: adaptive load balancing
                 Primary Slave: None
                 Currently Active Slave: eth2
                 MII Status: up
                 MII Polling Interval (ms): 100
                 Up Delay (ms): 0
                 Down Delay (ms): 0

                 Slave Interface: eth2
                 MII Status: up
                 Link Failure Count: 0
                 Permanent HW addr: 00:13:72:80:62:f0
            
     References:

         http://www.cyberciti.biz/nixcraft/vivek/blogger/2006/04/linux-bond-or-team-multiple-network.php
          Good, well written article describing the steps above.

         http://sourceforge.net/project/showfiles.php?group_id=24692&package_id=146474
          Documentation for bonding that can also be found in the kernel
          ./Documentation/networking/bonding.txt
        


TIP 229:

     /etc/nsswitch.conf - System Databases and Name Service Switch configuration file. 

         This file determines lookup order of services. For example, to match a name
         to an IP address, an entry can be put into the /etc/hosts file. Or a DNS query
         can be made. What's the order?  Normally, it's the entry in the /etc/hosts file.
         because /etc/nsswitch.conf contains the following setting
        
            hosts:      files dns


	 See man nsswitch.conf for more settings.




















THE FOLLOWING SECTIONS STARTS THE PROGRAMMING TIPS

PROGRAMMING TIP 1:

     Simple open command that restarts the close if a signal
     occurs.  Also note, the POSIX standards committee decided
     all new functions would not use errno and would instead
     directly return the error number in the function.

     A lot of functions return -1 on an error condition, then,
     set errno to the value of the error.  This will still work
     for all the well known functions; but, it's changing.

     /* start of code open.c
        Compile gcc -o open open.c

        Reference (Look for simple_but_common_x.x.x.tar.gz):
         http://sourceforge.net/project/showfiles.php?group_id=79066

                             */
     #include <stdio.h>
     #include <unistd.h>
     #include <sys/types.h>
     #include <sys/stat.h>
     #include <fcntl.h>
     #include <stdlib.h>

     #include <string.h>             /* for strerror(int errno) */
     #include <errno.h>

     #define BUFLEN 100
     extern int errno;


     int
     main (void)
     {
       int fp,error;
       char buf[BUFLEN+1];

       if ((fp = open ("data", O_RDWR | O_CREAT, 0600)) == -1)
         {
           fprintf (stderr, "Can't open data: %s\n", strerror (errno));
           return 1;
         }

       snprintf (buf, BUFLEN, "123");
       write (fp, buf, strlen (buf));

       // Restart close should a signal occur */
       while((( error = close (fp) ) == -1) && (errno == EINTR));
       if(error == -1)
         perror("Failed to close the file\n");

       return 0;
      }
     /* end of open.c */



PROGRAMMING TIP 2:

     Example of setting the effective UID on a file

     /*  start of code
       gcc uid_open.c -o uid_open
       su
       chown root.chirico uid_open
       chmod u+s uid_open
       exit

       Now you can run this as chirico and write to the
       root directory


     */
     #include <stdio.h>
     #include <stdlib.h>
     #include <sys/types.h>
     #include <sys/stat.h>
     #include <fcntl.h>
     #include <string.h>
     #include <unistd.h>


     int main()
     {
             int fd;

             if ((fd = open("/root/datajunk", O_RDWR | O_CREAT, 0600)) == -1) {
                     fprintf(stderr, "Can't open file \n");
                     return 1;
             }

             write(fd, "0123456", strlen("0123456"));
             close(fd);
             return 0;
     }

     /* end of code */



PROGRAMMING TIP 3:

     Writing a C http post.

     For downloads reference:
      http://prdownloads.sourceforge.net/cpearls/spider.tar.gz?download



PROGRAMMING TIP 4:

     Writing a 2.6.x Kernel Module:

       Look for the latest version of "procreadwrite".  This is a 2.6 kernel
       modules that demonstrates how to create /proc entires and write directly
       to user-land via tty.  It's updated to reflect replacement of "current->tty"
       with "current->signal->tty".

         http://sourceforge.net/project/showfiles.php?group_id=79066



PROGRAMMING TIP 5:

     Creating a filename with '\n'.  This goes with (TIP 71)

         /**** topen.c ***********************************************************
           Filenames can be created with any character except the null character
           and a slash.

           This example creates a file with returns '\n\n'

           There's a way to remove a file by inode:

               $ ls -libt *

           And, once you know the inode

               $ find . -inum <num> -exec mv '{}' goodstuff \;

           or

               $ find . -inum <num> -exec rm '{}' goodstuff \;

           or

               $ find . -inum <num> -exec cat '{}' \;



         Compile:

             gcc -o topen -Wall -W -O2 -s -pipe  topen.c

         Reference:
           http://prdownloads.sourceforge.net/cpearls/simple_but_common_0.0.14.tar.gz?download

         */
         #include <stdio.h>
         #include <unistd.h>
         #include <sys/types.h>
         #include <sys/stat.h>
         #include <fcntl.h>
         #include <stdlib.h>

         #include <string.h>             /* for strerror(int errno) */
         #include <errno.h>

         #define BUFLEN 100
         extern int errno;


         int
         main (void)
         {
           int fp,error;
           char buf[BUFLEN+1];

           if ((fp = open ("\n\n\n\n\n\n\n\n\n", O_RDWR | O_CREAT, 0600)) == -1)
             {
               fprintf (stderr, "Can't open data: %s\n", strerror (errno));
               return 1;
             }

           snprintf (buf, BUFLEN, "123");
           write (fp, buf, strlen (buf));

           // Restart close should a signal occur */
           while((( error = close (fp) ) == -1) && (errno == EINTR));
           if(error == -1)
             perror("Failed to close the file\n");

           return 0;

         }





  **Note, if you want email notification after every 50 new tips have been
    added, then, click on the following link:

     https://sourceforge.net/project/filemodule_monitor.php?filemodule_id=120838



PROGRAMMING TIP 6:

     Working With The Lemon Parser Generator.
     http://prdownloads.sourceforge.net/souptonuts/lemon_examples.tar.gz?download


PROGRAMMING TIP 7:

     copy command for std container output.

        #include <iostream>
        #include <list>
        #include <vector>
        #include <iterator>

        using namespace std;
        int main(void)
        {
          vector<int> v;
          list<int> l;

          v.push_back(1);
          v.push_back(2);
          copy(v.begin(),v.end(),ostream_iterator<int>(cout,"\n"));


          l.push_back(23);
          l.push_back(12);
          copy(l.begin(),l.end(),ostream_iterator<int>(cout,"\n"));

        }



PROGRAMMING TIP 8:

  /* Copyright (c) 2005 Mike Chirico mchirico@comcast.net mchirico@users.sourceforge.net


      Example of using virtual functions. Note the use of "initialization lists"
              for assinging the variable first and last.

      Compile:
        g++ -o virtualfunc -Wall -W -O2 -s -pipe  virtual_function.cc

      Download:
        http://prdownloads.sourceforge.net/cpearls/simple_but_common_cpp.tar.gz?download


  */

  #include <iostream>
  #include <string>
  #include <list>
  #include <algorithm>
  #include <iterator>
  #include <functional>


  using namespace std;

  class Employee {
  string first,last;
  public:
    Employee(const string& fn="John",const  string& ln="Smith"): first(fn),last(ln) {}
    virtual void print() const {
    cout << "First name: " << first << ", Last name: " << last << endl;
    }
    virtual ~Employee() {}
  };

  class Manager : public Employee {
    int level;
    list<Employee*> subordinates;
  public:
    Manager(const string& fn="Ivan",const string& ln="Stedwick", int lvl=1): Employee(fn,ln), level(lvl) {}
    void print() {
      cout << "Manager level: " << level << "  ";
      Employee::print();
      cout << "Supervises:" << endl;
      for_each(subordinates.begin(),subordinates.end(),mem_fun(&Employee::print));
      cout << endl << endl;
    }
    void addstaff(Employee& staff){
      subordinates.push_front(&staff);
    }
    void addstaff(Employee* staff){
      subordinates.push_front(staff);
       }

   };


   int main()
   {
     Employee p0("Lisa","Payne");
     Manager m0;

     m0.addstaff(new Employee("Zoe","Bear")); /* uses void addstaff(Employee* staff) */
     m0.addstaff(new Employee("Leah","Bopper"));
     m0.addstaff(new Employee("Abby","Chicken"));
     m0.addstaff(p0);  /* void addstaff(Employee& staff)  needed for this one */
     m0.addstaff(new Employee());
     m0.print();


     return 0;
   }



PROGRAMMING TIP 9:

   /*  Named Constructor Idiom.
       Reference: http://www.parashift.com/c++-faq-lite/ctors.html#faq-10.6

   */
   #include <iostream>
   #include <cmath>
   using namespace std;

   class Point {

   public:
     static Point rectangular(float x, float y);
     static Point polar(float radius, float angle);
     float get_x() { return x_; }
     float get_y() { return y_; }

   private:
     Point(float x, float y);
     float x_, y_;
   };

   inline Point::Point(float x, float y)
     : x_(x), y_(y) {}

   inline Point Point::rectangular(float x, float y)
   { return Point(x,y); }

   inline Point Point::polar(float radius, float angle)
   { return Point(radius*cos(angle),radius*sin(angle)); }

   int main(void)
   {
     Point p1 = Point::rectangular(5.7,1.2);
     Point p2 = Point::polar(5.7,1.2);

     cout << "(" << p1.get_x() << ", " << p1.get_y() << ")" << endl;
     cout << "(" << p2.get_x() << ", " << p2.get_y() << ")" << endl;
   }


PROGRAMMING TIP 10:

   /* Copy_constructor_assignment.cc
      Copyright (c) 2004 GPL Mike Chirico, mchirico@comcast.net or mchirico@users.sourceforge.net

      Reference: "The C++ Programming Language", 3rd ed, by Stroustrup
      pg. 246.


      Download:
      http://prdownloads.sourceforge.net/cpearls/simple_but_common.tar.gz?download

   */


   #include <iostream>


   class Name {
   public:
     char* s;
   };


   class Table {
     Name *p;
     size_t sz;
   public:
     Table(size_t s=15) {
               p = new Name[sz=s];
               for(size_t i=0; i< sz; ++i) p[i].s="****";
                          }
     Table(const Table &t);
     Table& operator=(const Table&);
     int prt();
     void asgn(char* ts,size_t index);
     ~Table(){ delete[] p; }
   };



   Table& Table::operator=(const Table &t)
   {
     if( this != &t) {
       delete[] p;
       p = new Name[sz=t.sz];
       for(size_t i=0; i< t.sz; ++i) p[i]=t.p[i];
     }
     return *this;
   }

   int Table::prt()
   {
     for(size_t i=0; i< sz; ++i) std::cout << p[i].s << " ";
     std::cout << std::endl;
     return 0;
   }

   /*
     asgn will increase the array of strings, if needed
     to size index+1, and add the string ts to position
     index.
   */
   void Table::asgn(char* ts,size_t index)
   {
     if(index < sz ) {
        p[index].s=ts;
     }else if ( index >= sz ){
        Name *tp;
        tp=p;

        p = new Name[index+1];

        for(size_t i=0; i< sz; ++i) p[i].s=tp[i].s;
        delete [] tp;
        for(size_t i=sz; i < index; ++i)p[i].s="****";

        p[index].s=ts;
        sz=index+1;
       }

   }

   int main(void)
   {

     Table t1;
     Table t2(5);

     // this is bigger than initial sz
     t1.asgn("myname",20);
     t1.prt();
     t2.prt();

     t1=t2;

     t1.prt();
     t2.prt();
   }
































REFERENCES:

  (1)  http://www.tldp.org/LDP/abs/html/index.html
  (2)  http://www.shelldorado.com/
  (3)  http://www.faqs.org/ftp/usenet/news.answers/unix-faq/faq/part1
  (4)  http://www-106.ibm.com/developerworks/library/l-rpm1/
  (5)  http://www-136.ibm.com/developerworks/linux/
  (6)  http://www.gnu.org/manual/manual.html
  (7)  http://fedora.redhat.com/
  (8)  http://souptonuts.sourceforge.net/chirico/index.php
  (9)  http://www.faqs.org/faqs/
 (10)  http://www.faqs.org/docs/linux_network/
 (11)  http://www.tml.hut.fi/~viu/linux/sag/sag-0.6.2.html/index.html
 (12)  http://www.yolinux.com/TUTORIALS/LinuxTutorialSysAdmin.html
 (13)  http://sed.sourceforge.net/grabbag/scripts/


  SUMMARY:
   (1)(2)(3) Excellent resource for bash scripts.
   (4)       rpm resource
   (6)       GNU Manuals Online
   (7)       Fedora
   (8)       Authors Website
   (11)(12)  System Admin
   (13)      Excellent source of sed scripts


HIGHLY RECOMMENDED BOOKS:

    "UNIX Network Programming, The Sockets Networking API", Volume 1, Third Edition.
        W. Richard Stevens, Bill Fenner, Andrew M. Rudoff.

    "UNIX Network Programming, Interprocess Communications", Volume 2, Second Edition.
        W. Richard Stevens.

    "UNIX SYSTEMS Programming, Communication, Concurrency, and Threads", Kay A. Robbins,
        Steven Robbins

    "Programming with POSIX Threads", David R. Butenhof. Addison-Wesley

    "The C++ Programming Language" Third Edition. Bjarne Stroustrup. Addison-Wesley.

    "C Programming Language" (2nd Edition), Second Edition, Kernighan and Ritchie

    "Advanced Linux Programming" by Mark Mitchell, Jeffrey Oldham, and Alex Samuel, of
        CodeSourcery LL. This book if free at the following resource:
        http://www.advancedlinuxprogramming.com/

    "Accelerated C++, Practical Programming by Example" Andrew Koenig, Barbara E. Moo.
        Addison-Wesley.

    "C: A Reference Manual", Fifth Edition, Samuel P. Harbison, Guy L. Steele.

    "C++ Standard Library: A Tutorial and Reference, The", Nicolai M. Josuttis. Addison Wesley.

    "C++ Templates: The Complete Guide", David Vandevoorde, Nicolai M. Josuttis. Addison Wesley.

    "Exceptional C++: 47 Engineering Puzzles, Programming Problems, and Solutions", Herb Sutter.
     Addison Wesley.

    "More Exceptional C++", Herb Sutter.

    "Exceptional C++ Style: 40 New Engineering Puzzles, Programming Problems, and Solutions",
       Herb Sutter. Addison Wesley.

    "The Art of Computer Programming (TAOCP)", Vol 1,Vol 2, Vol 3. Donald E. Knuth. Addison-Wesley.

    "Programming Perl, 3rd Edition", Tom Christiansen, Jon Orwant, Larry Wall. O'Reilly.
       http://www.unix.org.ua/orelly/perl/prog3/

    "Programming from the Ground Up", Jonathan Bartlett, Edited by Dominick Bruno, Jr.
       http://savannah.nongnu.org/download/pgubook/

    "Expert C Programming", Peter van der Linden, Prentice Hall PTR.


    "C++ Coding Standards 101 Rules, Guidelines, and Best Practices", by Herb Sutter and
       Andrei Alexandrescu.  http://www.gotw.ca/publications/c++cs/bibliography.htm

    "Linux Kernel Development: A practical guide to the design and implementation of
       the Linux kernel", by Robert Love, Sams Publishing.

    "C++ Template Metaprogramming: Concepts, Tools, and Techniques from Boost and Beyond", by
       David Abrahams and Aleksey Gurtovoy. Addison Wesley.



HIGHLY RECOMMENDED: PHILOSOPHICAL

     "Zen and the Art of Motorcycle Maintenance: An Inquiry into Values", Robert Pirsig.
        http://www.virtualschool.edu/mon/Quality/PirsigZen/index.html

     "Lila: An Inquiry Into Morals", Robert Pirsig.



RECOMMENDED BOOKS:

    "Structure and Interpretation of Computer Programs", Harold Abelson, Gerald Jay Sussman,
      Julie Sussman. This book is free:
        http://mitpress.mit.edu/sicp/full-text/book/book.html
              and
        http://www.gnu.org/software/mit-scheme/


RECOMMENDED HOTOS:

    Linux Networking-HOWTO (Previously the Net-3 Howto)
     http://en.tldp.org/HOWTO/NET3-4-HOWTO.html






CORRECTIONS:


The following people made suggestions and corrections:
  - Jorge Fabregas <fabregasj@prtc.net> TIP 21
  - Malcolm Parsons <malcolm.parsons@gmail.com> TIP 44
  - Andreas Haunschmidt <Andreas.Haunschmidt@utanet.at> TIP 102, TIP 90
  - P@draigBrady.com (Following links )
  - Jacques.GARNIER-EXTERIEUR@EU.RHODIA.COM TIP 46

                http://www.pixelbeat.org/cmdline.html
                http://www.pixelbeat.org/rotagator/linux.tips/rotagator.fortune
                http://www.pixelbeat.org/scripts/

  - Tobias Nix <tobias.nix@gmail.com> TIP 12