Diferencia entre revisiones de «Dispositivos wireless»

De gacq wiki
Saltar a: navegación, buscar
 
(→‎Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02))
 
(No se muestran 29 ediciones intermedias de 2 usuarios)
Línea 1: Línea 1:
 
=Placas=
 
=Placas=
 
*[http://linux-wless.passys.nl/ Directorio de "Chipsets de adaptadores Wireless"]
 
*[http://linux-wless.passys.nl/ Directorio de "Chipsets de adaptadores Wireless"]
 +
*[http://ndiswrapper.sourceforge.net/mediawiki/index.php/List ndiswrapper Chipset list]
 
*[http://wiki.buenosaireslibre.org/PlacasParaLinux  Todo sobre placas para Linux]
 
*[http://wiki.buenosaireslibre.org/PlacasParaLinux  Todo sobre placas para Linux]
 
*[http://wiki.buenosaireslibre.org/ComoComprar Como comprar una placa/AP/ProAP y seguir vivo]
 
*[http://wiki.buenosaireslibre.org/ComoComprar Como comprar una placa/AP/ProAP y seguir vivo]
 
*[http://ralink.rapla.net/ Placas con chipset ralink]
 
*[http://ralink.rapla.net/ Placas con chipset ralink]
 
==Recomendadas==
 
==Recomendadas==
 +
Si es para uso bajo linux exclusivamente, yo recomendaria, alguna con chipset Atheros, Ralink o Prism, que son los que estan mas evolucionados los drivers.
 
===Validar===
 
===Validar===
  
 
==Placas para Auditoria==
 
==Placas para Auditoria==
 
*http://frikeando.wordpress.com/2006/06/29/auditoria-wireless-%C2%BFque-tarjeta-wifi-debo-usarcomprar/
 
*http://frikeando.wordpress.com/2006/06/29/auditoria-wireless-%C2%BFque-tarjeta-wifi-debo-usarcomprar/
−
*MSI PC54G2 (PCI)
+
*MSI PC54G2 (PCI) -> No se consigue
−
*ENCORE ENLWI-G-RLAM
+
*ENCORE ENLWI-G-RLAM (PCI) -> No se consigue
  
 
==Donde comprar==
 
==Donde comprar==
Línea 22: Línea 24:
 
http://wiki.personaltelco.net/index.cgi/LinuxAccessPoint
 
http://wiki.personaltelco.net/index.cgi/LinuxAccessPoint
  
−
= Placas PCMCIA =
+
=Placas=
 +
==Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)==
 +
*[[ipw3945 driver manual installation for Debian Etch]]
  
−
Si es para uso bajo linux exclusivamente, yo recomendaria, alguna con chipset Atheros, o Prism, que son los que estan mas evolucionados
+
==D-Link DWG-G510 H/W Ver: C2 F/W Ver: 5.00 (Ralink)==
−
los drivers. Aunque la solucion ndiswrapper siempre es viable.
+
;ndiswrapper
 +
*[http://www.atlink.it/~conti/articles/asus-wl-138g-54mbps-and-linux/ ndiswrapper config]
 +
*[https://help.ubuntu.com/community/WikiGuide/DWL-G510 Another chip?
 +
 
 +
;Linux driver (Not working?) I used ndiswrapper
 +
*[http://rt2x00.serialmonkey.com/rt61-cvs-daily.tar.gz rt2x00 Open Source Project rt61 (PCI/PCMCIA) CVS hourly tarball]
 +
**[http://rt2x00.serialmonkey.com/wiki/index.php/Downloads Download Page]
 +
*[http://elonen.iki.fi/code/misc-notes/debian-rt61/index.html Old Debianized module]
 +
 
 +
;Related links:
 +
*http://rt2x00.serialmonkey.com/phpBB2/viewtopic.php?p=16056&sid=4808ac8fe8d9efa4a9db13996254acbe
 +
 
 +
==D-Link DWG-G520 H/W Ver: B3 F/W Ver: 4.30 (Atheros)==
 +
There is an official madwifi package in the non-free section of the Debian archive: see http://madwifi.org/wiki/UserDocs/Distro/Debian/MadWifi - If you want the lastest driver you have to install it manually.
 +
 
 +
===Manual installation (standard)===
 +
Download lastest drivers from http://madwifi.org/
 +
mkdir /root/hardware
 +
cd /root/hardware
 +
apt-get install subversion wireless-tools
 +
apt-get install linux-headers-{your-kernel-version}
 +
wget http://easynews.dl.sourceforge.net/sourceforge/madwifi/madwifi-0.9.2.tar.gz
 +
tar zxf madwifi-0.9.2.tar.gz
 +
cd madwifi-0.9.2/scripts
 +
./madwifi-unload.bash
 +
./find-madwifi-modules.sh /lib/modules/
 +
cd ..
 +
make
 +
make install
 +
modprobe ath_pci
 +
modprobe wlan_scan_sta
 +
ifconfig ath0 up
 +
wlanconfig ath0 list scan
 +
 
 +
'''References'''
 +
*http://madwifi.org/wiki/UserDocs/Distro/Debian/InstallingMadWifiByHand
 +
*http://madwifi.org/wiki/UserDocs/FirstTimeHowTo
 +
 
 +
===Manual installation with aireplay patch===
 +
<pre><nowiki>
 +
ifconfig ath0 down
 +
ifconfig wifi0 down
 +
rmmod wlan_wep ath_rate_sample ath_rate_onoe ath_pci wlan ath_hal ath_rate_amrr 2>/dev/null
 +
svn checkout http://svn.madwifi.org/trunk/ madwifi-ng
 +
# Check for last version of the patch
 +
wget http://patches.aircrack-ng.org/madwifi-ng-r2277.patch
 +
cd madwifi-ng
 +
patch -Np1 -i ../madwifi-ng-r2277.patch
 +
make
 +
make install
 +
depmod -ae
 +
modprobe ath_pci
 +
wlanconfig ath1 create wlandev wifi0 wlanmode monitor
 +
</nowiki></pre>
 +
 
 +
If during compiling you get a error like this:
 +
<pre><nowiki>
 +
cc1: warnings being treated as errors
 +
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c: In function 'giwscan_cb':
 +
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c:1742: warning: ISO C90 forbids mixed declarations and code
 +
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c:1768: warning: ISO C90 forbids mixed declarations and code
 +
make[3]: *** [/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.o] Error 1
 +
make[2]: *** [/srv/software/hardware/madwifi-ng/net80211] Error 2
 +
make[1]: *** [_module_/srv/software/hardware/madwifi-ng] Error 2
 +
make[1]: Leaving directory `/usr/src/linux-headers-2.6.12-1-k7'
 +
make: *** [modules] Error 2
 +
</nowiki></pre>
 +
you have to comment out "COPTS+= -Werror" line from Makefile.inc file.
 +
 
 +
'''References'''
 +
*http://www.aircrack-ng.org/doku.php?id=madwifi-ng
 +
 
 +
==D-Link DWL-G122 Rev C1 (Ralink)==
 +
Chipset: Ralink RT73 (RT2571W)
 +
usbid: 07d1:3c03
 +
 
 +
*https://help.ubuntu.com/community/WifiDocs/Device/Belkin_F5D7050_ver_3000_(Ralink_rt73_driver)
  
 
== Linksys WPC54GS Wireless-G Notebook Adapter with SpeedBooster - Cisco Systems ==
 
== Linksys WPC54GS Wireless-G Notebook Adapter with SpeedBooster - Cisco Systems ==

Revisión actual del 23:10 9 may 2007

Placas

Recomendadas

Si es para uso bajo linux exclusivamente, yo recomendaria, alguna con chipset Atheros, Ralink o Prism, que son los que estan mas evolucionados los drivers.

Validar

Placas para Auditoria

Donde comprar

Access Point

Revisar

http://wiki.personaltelco.net/index.cgi/LinuxAccessPoint

Placas

Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

D-Link DWG-G510 H/W Ver: C2 F/W Ver: 5.00 (Ralink)

ndiswrapper
Linux driver (Not working?) I used ndiswrapper
Related links

D-Link DWG-G520 H/W Ver: B3 F/W Ver: 4.30 (Atheros)

There is an official madwifi package in the non-free section of the Debian archive: see http://madwifi.org/wiki/UserDocs/Distro/Debian/MadWifi - If you want the lastest driver you have to install it manually.

Manual installation (standard)

Download lastest drivers from http://madwifi.org/ 

mkdir /root/hardware
cd /root/hardware
apt-get install subversion wireless-tools
apt-get install linux-headers-{your-kernel-version}
wget http://easynews.dl.sourceforge.net/sourceforge/madwifi/madwifi-0.9.2.tar.gz
tar zxf madwifi-0.9.2.tar.gz
cd madwifi-0.9.2/scripts
./madwifi-unload.bash
./find-madwifi-modules.sh /lib/modules/
cd ..
make
make install
modprobe ath_pci
modprobe wlan_scan_sta
ifconfig ath0 up
wlanconfig ath0 list scan

References

Manual installation with aireplay patch

 ifconfig ath0 down
 ifconfig wifi0 down
 rmmod wlan_wep ath_rate_sample ath_rate_onoe ath_pci wlan ath_hal ath_rate_amrr 2>/dev/null
 svn checkout http://svn.madwifi.org/trunk/ madwifi-ng
 # Check for last version of the patch
 wget http://patches.aircrack-ng.org/madwifi-ng-r2277.patch
 cd madwifi-ng
 patch -Np1 -i ../madwifi-ng-r2277.patch
 make
 make install
 depmod -ae
 modprobe ath_pci
 wlanconfig ath1 create wlandev wifi0 wlanmode monitor

If during compiling you get a error like this: 

cc1: warnings being treated as errors
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c: In function 'giwscan_cb':
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c:1742: warning: ISO C90 forbids mixed declarations and code
/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.c:1768: warning: ISO C90 forbids mixed declarations and code
make[3]: *** [/srv/software/hardware/madwifi-ng/net80211/ieee80211_wireless.o] Error 1
make[2]: *** [/srv/software/hardware/madwifi-ng/net80211] Error 2
make[1]: *** [_module_/srv/software/hardware/madwifi-ng] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.12-1-k7'
make: *** [modules] Error 2

you have to comment out "COPTS+= -Werror" line from Makefile.inc file.

References

D-Link DWL-G122 Rev C1 (Ralink)

Chipset: Ralink RT73 (RT2571W) usbid: 07d1:3c03

Linksys WPC54GS Wireless-G Notebook Adapter with SpeedBooster - Cisco Systems

No tiene soporte nativo de Linux funciona solo con ndiswrapper - http://ndiswrapper.sourceforge.net

Procedimiento:

  • Descarregar el driver ndiswrapper i el de la targeta per a l'xp.
  • Compilar i instalar l'ndiswrapper
    1. ndiswrapper -i XXX.inf [XXX.inf fitxer de driver per l'xp]
  • modprobe ndiswrapper
  • Configurar el dispositiu wlan0 com una wireless qualsevol
  • ifup wlan0

Para hacerla funcionar hice algo parecido a esto

apt-get install ndiswrapper-source
cd /usr/src
tar jxvf ndiswrapper-source.tar.bz2
cd modules/ndiswrapper
fakeroot debian/rules binary-modules
fakeroot debian/rules binary-utils
cd ..
dpkg -i ndiswrapper*.deb
depmod -a
ndiswrapper -i /pathto/your/drivers/inf
ndiswrapper -l
modprobe ndiswrapper
Obtenido de «https://wiki.gacq.com/index.php?title=Dispositivos_wireless&oldid=2532»